All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Kurt Borja <kuurtb@gmail.com>
Cc: "Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Linus Walleij" <linusw@kernel.org>,
	"Bartosz Golaszewski" <brgl@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org
Subject: Re: [PATCH v3 3/9] iio: adc: ti-ads1262: support per-channel sampling frequency
Date: Sun, 16 Aug 2026 22:34:32 +0100	[thread overview]
Message-ID: <20260816223432.64ddf4d0@jic23-huawei> (raw)
In-Reply-To: <20260807-ads126x-v3-3-f89925d72792@gmail.com>

On Fri, 07 Aug 2026 22:58:25 -0500
Kurt Borja <kuurtb@gmail.com> wrote:

> Add per-channel sampling frequency support. The "available" attribute is
> assigned per-channel too, in order to eventually support per-filter
> availability.
> 
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Trivial things only.

> ---
>  drivers/iio/adc/ti-ads1262.c | 159 ++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 158 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/adc/ti-ads1262.c b/drivers/iio/adc/ti-ads1262.c
> index d78e5e3ae13e..b3b7b1249102 100644
> --- a/drivers/iio/adc/ti-ads1262.c
> +++ b/drivers/iio/adc/ti-ads1262.c
> @@ -26,6 +26,7 @@
>  #include <linux/regulator/consumer.h>
>  #include <linux/spi/spi.h>
>  #include <linux/types.h>
> +#include <linux/units.h>
>  
>  #include <asm/byteorder.h>
>  
> @@ -148,6 +149,7 @@ enum {
>  	ADS1262_DR_14400_SPS,
>  	ADS1262_DR_19200_SPS,
>  	ADS1262_DR_38400_SPS,
> +	ADS1262_DR_COUNT,

For count / terminating entries, no trailing comma as nothing should ever
come after them.

>  };
>  
>  static int ads1262_channel_enable(struct ads1262 *st,
>  				  const struct iio_chan_spec *spec)
>  {
> +	struct ads1262_channel *chan = &st->channels[spec->scan_index];
> +	int ret;
>  	u8 val;
>  
>  	guard(mutex)(&st->xfer_lock);
>  	guard(mutex)(&st->chan_lock);
>  
> +	val = FIELD_PREP(ADS1262_MODE2_DR_MASK, chan->data_rate);
> +	ret = regmap_update_bits(st->regmap, ADS1262_MODE2_REG,
> +				 ADS1262_MODE2_DR_MASK, val);
Not seeing an advantage here over
	ret = regmap_update_bits(st->regmap, ADS1262_MODE2_REG,
				 ADS1262_MODE2_DR_MASK,
				 FIELD_PREP(ADS1262_MODE2_DR_MASK, chan->data_rate));

It is fine to go a little over 80 chars when it helps readability.  Here I think
that is the case as clear we have matching masks.

> +	if (ret)
> +		return ret;
> +
>  	val = FIELD_PREP(ADS1262_INPMUX_MUXN_MASK, spec->channel2) |
>  	      FIELD_PREP(ADS1262_INPMUX_MUXP_MASK, spec->channel);
>  	return regmap_update_bits(st->regmap, ADS1262_INPMUX_REG,

  parent reply	other threads:[~2026-08-16 21:34 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-08  3:58 [PATCH v3 0/9] iio: adc: Add TI ADS126X ADC family support Kurt Borja
2026-08-08  3:58 ` [PATCH v3 1/9] dt-bindings: iio: adc: support the TI ADS126x ADC family Kurt Borja
2026-08-08  4:08   ` sashiko-bot
2026-08-08 18:38   ` David Lechner
2026-08-09  8:26     ` Kurt Borja
2026-08-10 16:42       ` David Lechner
2026-08-11 20:30         ` Kurt Borja
2026-08-10  8:46   ` Bartosz Golaszewski
2026-08-11 21:29     ` Kurt Borja
2026-08-08  3:58 ` [PATCH v3 2/9] iio: adc: add the ti-ads1262 driver Kurt Borja
2026-08-08  4:11   ` sashiko-bot
2026-08-08 18:39   ` David Lechner
2026-08-09  8:26     ` Kurt Borja
2026-08-10 16:42       ` David Lechner
2026-08-11 20:28         ` Kurt Borja
2026-08-12 13:40           ` David Lechner
2026-08-10 18:48       ` Andy Shevchenko
2026-08-11 20:31         ` Kurt Borja
2026-08-08 22:28   ` Uwe Kleine-König
2026-08-09 16:24     ` Kurt Borja
2026-08-16 21:30   ` Jonathan Cameron
2026-08-17  8:22     ` Andy Shevchenko
2026-08-17 20:25       ` Jonathan Cameron
2026-08-08  3:58 ` [PATCH v3 3/9] iio: adc: ti-ads1262: support per-channel sampling frequency Kurt Borja
2026-08-08  4:11   ` sashiko-bot
2026-08-08 18:39   ` David Lechner
2026-08-09  8:27     ` Kurt Borja
2026-08-16 21:34   ` Jonathan Cameron [this message]
2026-08-08  3:58 ` [PATCH v3 4/9] iio: adc: ti-ads1262: support per-channel reference and gain Kurt Borja
2026-08-08 18:39   ` David Lechner
2026-08-09  8:28     ` Kurt Borja
2026-08-08  3:58 ` [PATCH v3 5/9] iio: adc: ti-ads1262: support input chopping Kurt Borja
2026-08-08 18:39   ` David Lechner
2026-08-08  3:58 ` [PATCH v3 6/9] iio: adc: ti-ads1262: support excitation currents Kurt Borja
2026-08-08  4:13   ` sashiko-bot
2026-08-08 18:39   ` David Lechner
2026-08-16 21:42   ` Jonathan Cameron
2026-08-08  3:58 ` [PATCH v3 7/9] iio: adc: ti-ads1262: support triggered buffer sampling Kurt Borja
2026-08-08  4:09   ` sashiko-bot
2026-08-08 18:39   ` David Lechner
2026-08-09  8:28     ` Kurt Borja
2026-08-10 16:31       ` David Lechner
2026-08-11 20:24         ` Kurt Borja
2026-08-16 21:54           ` Jonathan Cameron
2026-08-27 18:45             ` Kurt Borja
2026-08-31  2:10               ` Jonathan Cameron
2026-08-08  3:58 ` [PATCH v3 8/9] iio: adc: ti-ads1262: support REFOUT and VBIAS regulators Kurt Borja
2026-08-08  4:11   ` sashiko-bot
2026-08-08 18:40   ` David Lechner
2026-08-09  8:28     ` Kurt Borja
2026-08-08  3:58 ` [PATCH v3 9/9] iio: adc: ti-ads1262: support common mode supplies Kurt Borja
2026-08-08 18:40   ` David Lechner
2026-08-09  8:29     ` Kurt Borja
2026-08-08 18:37 ` [PATCH v3 0/9] iio: adc: Add TI ADS126X ADC family support David Lechner
2026-08-09  8:29   ` Kurt Borja
2026-08-10 16:42     ` David Lechner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260816223432.64ddf4d0@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=andy@kernel.org \
    --cc=brgl@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuurtb@gmail.com \
    --cc=linusw@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.