From: Jisheng Zhang <jszhang@kernel.org>
To: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] spi: dw: use DW_SPI_INT_MASK instead of hardcoded 0xff
Date: Mon, 17 Aug 2026 23:14:04 +0800 [thread overview]
Message-ID: <20260817151404.28324-3-jszhang@kernel.org> (raw)
In-Reply-To: <20260817151404.28324-1-jszhang@kernel.org>
The Interrupt Mask Register valid bits is bit[5:0] which is well
defined with DW_SPI_INT_MASK, use it instead of the incorrect(but no
harm) and hardcoded 0xff.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/spi/spi-dw-core.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 299474507663..75d3f5fd79a3 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -228,7 +228,7 @@ static irqreturn_t dw_spi_transfer_handler(struct dw_spi *dws)
*/
dw_reader(dws);
if (!dws->rx_len) {
- dw_spi_mask_intr(dws, 0xff);
+ dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
spi_finalize_current_transfer(dws->ctlr);
} else if (dws->rx_len <= dw_readl(dws, DW_SPI_RXFTLR)) {
dw_writel(dws, DW_SPI_RXFTLR, dws->rx_len - 1);
@@ -264,7 +264,7 @@ static irqreturn_t dw_spi_enh_handler(struct dw_spi *dws)
if (!dws->tx_len && dws->rx_len) {
dw_spi_mask_intr(dws, DW_SPI_INT_TXEI);
} else if (!dws->rx_len && !dws->tx_len) {
- dw_spi_mask_intr(dws, 0xff);
+ dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
spi_finalize_current_transfer(dws->ctlr);
}
@@ -282,12 +282,13 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id)
if (!dws->transfer_handler ||
(!ctlr->cur_msg && dws->transfer_handler == dw_spi_transfer_handler)) {
- dw_spi_mask_intr(dws, 0xff);
+ dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
return IRQ_HANDLED;
}
+
if (dws->transfer_handler == dw_spi_enh_handler &&
!dws->rx_len && !dws->tx_len) {
- dw_spi_mask_intr(dws, 0xff);
+ dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
spi_finalize_current_transfer(ctlr);
return IRQ_HANDLED;
}
@@ -525,7 +526,7 @@ static int dw_spi_transfer_one(struct spi_controller *ctlr,
dws->dma_mapped = spi_xfer_is_dma_mapped(ctlr, spi, transfer);
/* For poll mode just disable all interrupts */
- dw_spi_mask_intr(dws, 0xff);
+ dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
if (dws->dma_mapped) {
ret = dws->dma_ops->dma_setup(dws, transfer);
@@ -831,7 +832,7 @@ static int dw_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
dw_spi_update_config(dws, mem->spi, &cfg, NULL);
- dw_spi_mask_intr(dws, 0xff);
+ dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
dw_spi_enable_chip(dws, 1);
@@ -999,7 +1000,7 @@ static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op *
dw_spi_update_config(dws, mem->spi, &cfg, &enh_cfg);
- dw_spi_mask_intr(dws, 0xff);
+ dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
reinit_completion(&ctlr->xfer_completion);
if (op->addr.nbytes && dws->set_addr_nbyte) {
@@ -1038,7 +1039,7 @@ static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op *
ms = wait_for_completion_timeout(&ctlr->xfer_completion,
msecs_to_jiffies(ms));
if (ms == 0) {
- dw_spi_mask_intr(dws, 0xff);
+ dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
synchronize_irq(dws->irq);
dws->rx = NULL;
dws->tx = NULL;
--
2.53.0
prev parent reply other threads:[~2026-08-17 15:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-17 15:14 [PATCH 0/2] spi: dw: clean ups from "use threaded interrupt" Jisheng Zhang
2026-08-17 15:14 ` [PATCH 1/2] spi: dw: use DW_SPI_ISR directly Jisheng Zhang
2026-08-17 15:14 ` Jisheng Zhang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260817151404.28324-3-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.