[PATCH v6 6/6] ARM: dts: aspeed: g6: add aspeed,vuart-over-pci prop to vuart3 and 4

["Grégoire Layet" <gregoire.layet@9elements.com>]

The VUART 3 and 4 are VUART over PCI.
Set this flag to indicate this information.
Also set the scu-syscon phandle.

Added lines are compliant with dt-style strict mode

Signed-off-by: Grégoire Layet <gregoire.layet@9elements.com>
---
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index c952e2075b4c..61cdca0b3ed7 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -723,6 +723,9 @@ vuart3: serial@1e787800 {
 				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
 				no-loopback-test;
+				aspeed,scu-syscon = <&syscon>;
+				aspeed,vuart-over-pci;
+
 				status = "disabled";
 			};
 
@@ -743,6 +746,9 @@ vuart4: serial@1e788800 {
 				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
 				no-loopback-test;
+				aspeed,scu-syscon = <&syscon>;
+				aspeed,vuart-over-pci;
+
 				status = "disabled";
 			};
 

-- 
2.54.0