[PATCH] serial: 8250: don't register ports that have no hardware

[Lucas Tanure <tanure@linux.com>]

The 8250 driver creates a fixed set of port slots at boot and
registers a ttyS device for each one, even when the slot describes no
hardware. On device tree platforms those slots are empty, but they
still take the ttyS0..ttyS3 names.

New Amlogic SoCs (S4, T7) name their real UARTs ttyS as well. With
both drivers built in, as in arm64 defconfig, the real port fails to bind:

  sysfs: cannot create duplicate filename '/class/tty/ttyS0'
  meson_uart fe078000.serial: Cannot register tty device on line 0

Skip slots that have no I/O and no memory address. Legacy x86 slots
come with resources and are not affected.

Signed-off-by: Lucas Tanure <tanure@linux.com>
Assisted-by: Claude:claude-fable-5
---
 drivers/tty/serial/8250/8250_core.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index f49862d90eeb..e66e0cdbb210 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -378,6 +378,14 @@ void __init serial8250_register_ports(struct uart_driver *drv, struct device *de
 		if (up->port.dev)
 			continue;
 
+		/*
+		 * Skip slots that describe no hardware: they would only
+		 * take up ttyS<n> names. Real ports get their node when
+		 * they claim a slot in serial8250_register_8250_port().
+		 */
+		if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
+			continue;
+
 		up->port.dev = dev;
 
 		if (uart_console_registered(&up->port))
-- 
2.55.0