From: Udaya Kiran Challa <challauday369@gmail.com>
To: lee@kernel.org, pavel@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org
Cc: skhan@linuxfoundation.org, me@brighamcampbell.com,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Udaya Kiran Challa <challauday369@gmail.com>
Subject: [PATCH] dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema
Date: Thu, 20 Aug 2026 20:32:23 +0530 [thread overview]
Message-ID: <20260820150223.108374-1-challauday369@gmail.com> (raw)
Convert lacie,netxbig-leds devicetree binding from legacy
text format to DT schema.
Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
---
.../bindings/leds/lacie,netxbig-leds.yaml | 134 ++++++++++++++++++
.../devicetree/bindings/leds/leds-netxbig.txt | 92 ------------
2 files changed, 134 insertions(+), 92 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
diff --git a/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml b/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
new file mode 100644
index 000000000000..ffdd47458d24
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/lacie,netxbig-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LaCie/Seagate netxbig CPLD LEDs
+
+maintainers:
+ - Simon Guinot <simon.guinot@sequanux.org>
+
+description: |
+ Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
+ boards (Example: 2Big/5Big Network v2, 2Big NAS).
+
+properties:
+ compatible:
+ const: lacie,netxbig-leds
+
+ gpio-ext:
+ description: Phandle for the gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ timers:
+ description: |
+ Timer array. Each timer entry is represented by three integers:
+ Mode (gpio-ext bus), delay_on and delay_off.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+ - compatible
+ - gpio-ext
+
+additionalProperties:
+ description: Each child node represents a single LED
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ mode-addr:
+ description: Mode register address on gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ mode-val:
+ description: |
+ Mode to value mapping. Each entry is represented by two integers: a mode and
+ the corresponding value on the gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ bright-addr:
+ description: Brightness register address on gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ max-brightness:
+ description: Maximum brightness value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - mode-addr
+ - mode-val
+ - bright-addr
+ - max-brightness
+
+examples:
+ - |
+ #include <dt-bindings/leds/leds-netxbig.h>
+
+ netxbig-leds {
+ compatible = "lacie,netxbig-leds";
+
+ gpio-ext = <&netxbig_gpio_ext>;
+
+ timers = <NETXBIG_LED_TIMER1 500 500
+ NETXBIG_LED_TIMER2 500 1000>;
+
+ blue-power {
+ label = "netxbig:blue:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 1
+ NETXBIG_LED_TIMER1 3
+ NETXBIG_LED_TIMER2 7>;
+ bright-addr = <1>;
+ max-brightness = <7>;
+ };
+ red-power {
+ label = "netxbig:red:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <1>;
+ max-brightness = <7>;
+ };
+ blue-sata0 {
+ label = "netxbig:blue:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ red-sata0 {
+ label = "netxbig:red:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ blue-sata1 {
+ label = "netxbig:blue:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ red-sata1 {
+ label = "netxbig:red:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
deleted file mode 100644
index 5ef92a26d768..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-netxbig.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
-boards (Example: 2Big/5Big Network v2, 2Big NAS).
-
-Required properties:
-- compatible: "lacie,netxbig-leds".
-- gpio-ext: Phandle for the gpio-ext bus.
-
-Optional properties:
-- timers: Timer array. Each timer entry is represented by three integers:
- Mode (gpio-ext bus), delay_on and delay_off.
-
-Each LED is represented as a sub-node of the netxbig-leds device.
-
-Required sub-node properties:
-- mode-addr: Mode register address on gpio-ext bus.
-- mode-val: Mode to value mapping. Each entry is represented by two integers:
- A mode and the corresponding value on the gpio-ext bus.
-- bright-addr: Brightness register address on gpio-ext bus.
-- max-brightness: Maximum brightness value.
-
-Optional sub-node properties:
-- label: Name for this LED. If omitted, the label is taken from the node name.
-- linux,default-trigger: Trigger assigned to the LED.
-
-Example:
-
-netxbig-leds {
- compatible = "lacie,netxbig-leds";
-
- gpio-ext = &gpio_ext;
-
- timers = <NETXBIG_LED_TIMER1 500 500
- NETXBIG_LED_TIMER2 500 1000>;
-
- blue-power {
- label = "netxbig:blue:power";
- mode-addr = <0>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 1
- NETXBIG_LED_TIMER1 3
- NETXBIG_LED_TIMER2 7>;
- bright-addr = <1>;
- max-brightness = <7>;
- };
- red-power {
- label = "netxbig:red:power";
- mode-addr = <0>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <1>;
- max-brightness = <7>;
- };
- blue-sata0 {
- label = "netxbig:blue:sata0";
- mode-addr = <3>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 7
- NETXBIG_LED_SATA 1
- NETXBIG_LED_TIMER1 3>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- red-sata0 {
- label = "netxbig:red:sata0";
- mode-addr = <3>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- blue-sata1 {
- label = "netxbig:blue:sata1";
- mode-addr = <4>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 7
- NETXBIG_LED_SATA 1
- NETXBIG_LED_TIMER1 3>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- red-sata1 {
- label = "netxbig:red:sata1";
- mode-addr = <4>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
-};
--
2.34.1
next reply other threads:[~2026-08-20 15:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-20 15:02 Udaya Kiran Challa [this message]
2026-08-20 15:11 ` [PATCH] dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema sashiko-bot
2026-08-20 18:06 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260820150223.108374-1-challauday369@gmail.com \
--to=challauday369@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=me@brighamcampbell.com \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.