[PATCH] i2c: tiny-usb: add Zephyr Project VID/PID pair

["Benjamin Cabé" <kartben@gmail.com>]

The Zephyr Project ships an i2c-tiny-usb sample with its USB device
stack, which turns any supported board into a USB-to-I2C bridge. The
sample implements the same vendor request protocol as the original
i2c-tiny-usb firmware, exposing a single vendor-specific interface
with no endpoints, so it can be driven by this driver as-is.

Zephyr in-tree samples must use the project's own USB vendor ID
(0x2fe3) rather than a donated or third-party one, and product ID
0x0013 is reserved for this sample in the project's VID/PID list.
Without an entry here, users have to bind the device by hand through
the driver's dynamic ID sysfs attribute.

Link: https://github.com/zephyrproject-rtos/zephyr/commit/281b5743d183
Assisted-by: Claude:claude-opus-5
Signed-off-by: Benjamin Cabé <kartben@gmail.com>
---
 drivers/i2c/busses/i2c-tiny-usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index 73355a56aabf..113af96728dd 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -157,11 +157,13 @@ static const struct i2c_algorithm usb_algorithm = {
 /*
  * Initially the usb i2c interface uses a vid/pid pair donated by
  * Future Technology Devices International Ltd., later a pair was
- * bought from EZPrototypes
+ * bought from EZPrototypes. The Zephyr Project reserved a pid from
+ * its own vid for the i2c-tiny-usb sample of its USB device stack.
  */
 static const struct usb_device_id i2c_tiny_usb_table[] = {
 	{ USB_DEVICE(0x0403, 0xc631) },   /* FTDI */
 	{ USB_DEVICE(0x1c40, 0x0534) },   /* EZPrototypes */
+	{ USB_DEVICE(0x2fe3, 0x0013) },   /* Zephyr Project */
 	{ }                               /* Terminating entry */
 };
 
-- 
2.55.0