From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Junjie Cao <junjie.cao@intel.com>,
Linus Walleij <linusw@kernel.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.10.y] gpio: ml-ioh: use raw_spinlock_t for the register lock
Date: Mon, 24 Aug 2026 11:01:03 -0400 [thread overview]
Message-ID: <20260824150103.3723586-1-sashal@kernel.org> (raw)
In-Reply-To: <2026082012-sessions-framing-5b42@gregkh>
From: Junjie Cao <junjie.cao@intel.com>
[ Upstream commit 600411ea1f2443fdf5b1af9b6480f616d7aff9d0 ]
ioh_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
ioh_irq_enable() and ioh_irq_disable() take the same lock from the
.irq_enable/.irq_disable callbacks, which are likewise invoked with
desc->lock held.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, and those critical sections only perform short
sequences of MMIO register accesses (ioread32()/iowrite32()); the
.irq_set_type callback additionally emits a dev_warn() on an unsupported
type. None of these are sleepable operations, so keeping this register
lock non-sleeping is appropriate for the irqchip callbacks and does not
change the GPIO-side locking contract.
This is the same fix as commit a02b8950d619 ("gpio: pch: use
raw_spinlock_t for the register lock"); this driver shares the same
structure as gpio-pch.
Fixes: 54be566317b6 ("gpio-ml-ioh: Support interrupt function")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260731032747.2987292-1-junjie.cao@intel.com
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-ml-ioh.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index 53d4abefa6ff2..d98c761b0d709 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -84,7 +84,7 @@ struct ioh_gpio {
u32 gpio_use_sel;
int ch;
int irq_base;
- spinlock_t spinlock;
+ raw_spinlock_t spinlock;
};
static const int num_ports[] = {6, 12, 16, 16, 15, 16, 16, 12};
@@ -95,7 +95,7 @@ static void ioh_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
struct ioh_gpio *chip = gpiochip_get_data(gpio);
unsigned long flags;
- spin_lock_irqsave(&chip->spinlock, flags);
+ raw_spin_lock_irqsave(&chip->spinlock, flags);
reg_val = ioread32(&chip->reg->regs[chip->ch].po);
if (val)
reg_val |= (1 << nr);
@@ -103,7 +103,7 @@ static void ioh_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
reg_val &= ~(1 << nr);
iowrite32(reg_val, &chip->reg->regs[chip->ch].po);
- spin_unlock_irqrestore(&chip->spinlock, flags);
+ raw_spin_unlock_irqrestore(&chip->spinlock, flags);
}
static int ioh_gpio_get(struct gpio_chip *gpio, unsigned nr)
@@ -121,7 +121,7 @@ static int ioh_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
u32 reg_val;
unsigned long flags;
- spin_lock_irqsave(&chip->spinlock, flags);
+ raw_spin_lock_irqsave(&chip->spinlock, flags);
pm = ioread32(&chip->reg->regs[chip->ch].pm) &
((1 << num_ports[chip->ch]) - 1);
pm |= (1 << nr);
@@ -134,7 +134,7 @@ static int ioh_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
reg_val &= ~(1 << nr);
iowrite32(reg_val, &chip->reg->regs[chip->ch].po);
- spin_unlock_irqrestore(&chip->spinlock, flags);
+ raw_spin_unlock_irqrestore(&chip->spinlock, flags);
return 0;
}
@@ -145,12 +145,12 @@ static int ioh_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
u32 pm;
unsigned long flags;
- spin_lock_irqsave(&chip->spinlock, flags);
+ raw_spin_lock_irqsave(&chip->spinlock, flags);
pm = ioread32(&chip->reg->regs[chip->ch].pm) &
((1 << num_ports[chip->ch]) - 1);
pm &= ~(1 << nr);
iowrite32(pm, &chip->reg->regs[chip->ch].pm);
- spin_unlock_irqrestore(&chip->spinlock, flags);
+ raw_spin_unlock_irqrestore(&chip->spinlock, flags);
return 0;
}
@@ -256,7 +256,7 @@ static int ioh_irq_type(struct irq_data *d, unsigned int type)
dev_dbg(chip->dev, "%s:irq=%d type=%d ch=%d pos=%d type=%d\n",
__func__, irq, type, ch, im_pos, type);
- spin_lock_irqsave(&chip->spinlock, flags);
+ raw_spin_lock_irqsave(&chip->spinlock, flags);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
@@ -296,7 +296,7 @@ static int ioh_irq_type(struct irq_data *d, unsigned int type)
ien = ioread32(&chip->reg->regs[chip->ch].ien);
iowrite32(ien | BIT(ch), &chip->reg->regs[chip->ch].ien);
end:
- spin_unlock_irqrestore(&chip->spinlock, flags);
+ raw_spin_unlock_irqrestore(&chip->spinlock, flags);
return 0;
}
@@ -326,11 +326,11 @@ static void ioh_irq_disable(struct irq_data *d)
unsigned long flags;
u32 ien;
- spin_lock_irqsave(&chip->spinlock, flags);
+ raw_spin_lock_irqsave(&chip->spinlock, flags);
ien = ioread32(&chip->reg->regs[chip->ch].ien);
ien &= ~(1 << (d->irq - chip->irq_base));
iowrite32(ien, &chip->reg->regs[chip->ch].ien);
- spin_unlock_irqrestore(&chip->spinlock, flags);
+ raw_spin_unlock_irqrestore(&chip->spinlock, flags);
}
static void ioh_irq_enable(struct irq_data *d)
@@ -340,11 +340,11 @@ static void ioh_irq_enable(struct irq_data *d)
unsigned long flags;
u32 ien;
- spin_lock_irqsave(&chip->spinlock, flags);
+ raw_spin_lock_irqsave(&chip->spinlock, flags);
ien = ioread32(&chip->reg->regs[chip->ch].ien);
ien |= 1 << (d->irq - chip->irq_base);
iowrite32(ien, &chip->reg->regs[chip->ch].ien);
- spin_unlock_irqrestore(&chip->spinlock, flags);
+ raw_spin_unlock_irqrestore(&chip->spinlock, flags);
}
static irqreturn_t ioh_gpio_handler(int irq, void *dev_id)
@@ -441,7 +441,7 @@ static int ioh_gpio_probe(struct pci_dev *pdev,
chip->base = base;
chip->reg = chip->base;
chip->ch = i;
- spin_lock_init(&chip->spinlock);
+ raw_spin_lock_init(&chip->spinlock);
ioh_gpio_setup(chip, num_ports[i]);
ret = gpiochip_add_data(&chip->gpio, chip);
if (ret) {
@@ -529,9 +529,9 @@ static int ioh_gpio_suspend(struct pci_dev *pdev, pm_message_t state)
struct ioh_gpio *chip = pci_get_drvdata(pdev);
unsigned long flags;
- spin_lock_irqsave(&chip->spinlock, flags);
+ raw_spin_lock_irqsave(&chip->spinlock, flags);
ioh_gpio_save_reg_conf(chip);
- spin_unlock_irqrestore(&chip->spinlock, flags);
+ raw_spin_unlock_irqrestore(&chip->spinlock, flags);
ret = pci_save_state(pdev);
if (ret) {
@@ -563,11 +563,11 @@ static int ioh_gpio_resume(struct pci_dev *pdev)
}
pci_restore_state(pdev);
- spin_lock_irqsave(&chip->spinlock, flags);
+ raw_spin_lock_irqsave(&chip->spinlock, flags);
iowrite32(0x01, &chip->reg->srst);
iowrite32(0x00, &chip->reg->srst);
ioh_gpio_restore_reg_conf(chip);
- spin_unlock_irqrestore(&chip->spinlock, flags);
+ raw_spin_unlock_irqrestore(&chip->spinlock, flags);
return 0;
}
--
2.53.0
prev parent reply other threads:[~2026-08-24 15:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-20 11:10 FAILED: patch "[PATCH] gpio: ml-ioh: use raw_spinlock_t for the register lock" failed to apply to 5.10-stable tree gregkh
2026-08-24 15:01 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260824150103.3723586-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=junjie.cao@intel.com \
--cc=linusw@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.