All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anders Roxell <anders.roxell@linaro.org>
To: u-boot@lists.u-boot-project.org
Cc: marek.vasut@mailbox.org, trini@konsulko.com,
	ilias.apalodimas@linaro.org, michal.simek@amd.com, lukma@denx.de,
	alchark@flipper.net, jerome.forissier@arm.com,
	dlechner@baylibre.com, anshuld@ti.com, sjg@chromium.org,
	Anders Roxell <anders.roxell@linaro.org>
Subject: [PATCH v7 09/24] usb: dwc3: ep0: flush and invalidate cache around ep0 transfers
Date: Mon, 24 Aug 2026 17:41:18 +0200	[thread overview]
Message-ID: <20260824154133.217744-10-anders.roxell@linaro.org> (raw)
In-Reply-To: <20260824154133.217744-1-anders.roxell@linaro.org>

The dwc3 driver was synced from Linux v6.16. In Linux the DMA api keeps
the trb and the buffers in sync with the controller. In u-boot the ep0
trb and buffers come from dma_alloc_coherent, which is just cached
memory, not coherent. Nothing syncs them around the controller dma, so
we must flush and invalidate by hand.

U-boot did this before, the resync dropped it. Without cache maintenance
the controller reads a stale trb and a stale buffer, and reads back stale
status. The device answers GET_DESCRIPTOR with garbage, so the host fails
to enumerate with -71 (EPROTO).

Flush the trb and the buffer before the controller reads them. Invalidate
the setup packet, the status write back and the OUT data buffer after the
controller writes them.

Reported-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
---
 drivers/usb/dwc3/ep0.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index e81404e11405..f82c0f7e6dec 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -55,6 +55,9 @@ static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep,
 	else
 		trb->ctrl |= (DWC3_TRB_CTRL_IOC
 				| DWC3_TRB_CTRL_LST);
+
+	dwc3_flush_cache((uintptr_t)buf_dma, len);
+	dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
 }
 
 static int dwc3_ep0_start_trans(struct dwc3_ep *dep)
@@ -812,6 +815,8 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
 	int ret = -EINVAL;
 	u32 len;
 
+	dwc3_invalidate_cache((uintptr_t)ctrl, sizeof(*ctrl));
+
 	if (!dwc->gadget_driver || !dwc->softconnect || !dwc->connected)
 		goto out;
 
@@ -857,6 +862,8 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 	dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
 	trb = dwc->ep0_trb;
 
+	dwc3_invalidate_cache((uintptr_t)trb, sizeof(*trb) * 2);
+
 	r = next_request(&ep0->pending_list);
 	if (!r)
 		return;
@@ -874,6 +881,9 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 
 	length = trb->size & DWC3_TRB_SIZE_MASK;
 	transferred = ur->length - length;
+
+	if (ur->buf && !r->direction)
+		dwc3_invalidate_cache((uintptr_t)ur->dma, ur->length);
 	ur->actual += transferred;
 
 	if ((IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
-- 
2.53.0


  parent reply	other threads:[~2026-08-24 16:47 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-24 15:41 [PATCH v7 00/24] usb: dwc3: part 2, make the resynced code work Anders Roxell
2026-08-24 15:41 ` [PATCH v7 01/24] dm: add helpers needed by the resynced DWC3 code Anders Roxell
2026-08-24 15:41 ` [PATCH v7 02/24] usb: phy: add the usb_phy " Anders Roxell
2026-08-24 15:41 ` [PATCH v7 03/24] usb: gadget: adapt the gadget API after the resync Anders Roxell
2026-08-24 15:41 ` [PATCH v7 04/24] usb: gadget: udc: make udc-core build in u-boot Anders Roxell
2026-08-24 15:41 ` [PATCH v7 05/24] usb: dwc3: make the core driver " Anders Roxell
2026-08-24 15:41 ` [PATCH v7 06/24] usb: dwc3: bring back the samsung usb phy driver Anders Roxell
2026-08-24 15:41 ` [PATCH v7 07/24] usb: dwc3: make gadget and ep0 build in u-boot Anders Roxell
2026-08-24 15:41 ` [PATCH v7 08/24] usb: gadget: udc: enable async callbacks on bind Anders Roxell
2026-08-24 15:41 ` Anders Roxell [this message]
2026-08-24 15:41 ` [PATCH v7 10/24] usb: dwc3: make the am62 glue build in u-boot Anders Roxell
2026-08-24 15:41 ` [PATCH v7 11/24] usb: gadget: ci_udc: move to the udc-core registration Anders Roxell
2026-08-24 15:41 ` [PATCH v7 12/24] usb: gadget: ci_udc: set endpoint capabilities Anders Roxell
2026-08-24 15:41 ` [PATCH v7 13/24] usb: gadget: dwc2_udc_otg: fix up after the resync Anders Roxell
2026-08-24 15:41 ` [PATCH v7 14/24] usb: gadget: fix up the function drivers " Anders Roxell
2026-08-24 15:41 ` [PATCH v7 15/24] usb: gadget: fix up the last UDC " Anders Roxell
2026-08-24 15:41 ` [PATCH v7 16/24] usb: gadget: atmel_usba_udc: set endpoint capabilities Anders Roxell
2026-08-24 15:41 ` [PATCH v7 17/24] usb: gadget: at91_udc: register with udc-core Anders Roxell
2026-08-24 15:41 ` [PATCH v7 18/24] usb: gadget: at91_udc: set endpoint capabilities Anders Roxell
2026-08-24 15:41 ` [PATCH v7 19/24] usb: musb-new: fix up after the resync Anders Roxell
2026-08-24 15:41 ` [PATCH v7 20/24] usb: musb-new: set endpoint capabilities Anders Roxell
2026-08-24 15:41 ` [PATCH v7 21/24] usb: mtu3: fix up after the resync Anders Roxell
2026-08-24 15:41 ` [PATCH v7 22/24] usb: mtu3: set endpoint capabilities Anders Roxell
2026-08-24 15:41 ` [PATCH v7 23/24] usb: host: xhci: fix up after the resync Anders Roxell
2026-08-24 15:41 ` [PATCH v7 24/24] usb: cdns3: " Anders Roxell
2026-08-25  9:42 ` [PATCH v7 00/24] usb: dwc3: part 2, make the resynced code work Anshul Dalal
2026-08-26  8:29   ` Anders Roxell
2026-08-27  7:48     ` Anshul Dalal
2026-08-28 12:26       ` Anders Roxell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260824154133.217744-10-anders.roxell@linaro.org \
    --to=anders.roxell@linaro.org \
    --cc=alchark@flipper.net \
    --cc=anshuld@ti.com \
    --cc=dlechner@baylibre.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=jerome.forissier@arm.com \
    --cc=lukma@denx.de \
    --cc=marek.vasut@mailbox.org \
    --cc=michal.simek@amd.com \
    --cc=sjg@chromium.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.u-boot-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.