All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: linux-acpi@vger.kernel.org, linux-cxl@vger.kernel.org
Cc: rafael@kernel.org, tony.luck@intel.com, bp@alien8.de,
	guohanjun@huawei.com, mchehab@kernel.org,
	xueshuai@linux.alibaba.com, terry.bowman@amd.com,
	benjamin.cheatham@amd.com, alison.schofield@intel.com,
	sashiko-bot@kernel.org
Subject: [PATCH v4 12/13] ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata
Date: Mon, 24 Aug 2026 10:49:35 -0700	[thread overview]
Message-ID: <20260824174936.939059-13-dave.jiang@intel.com> (raw)
In-Reply-To: <20260824174936.939059-1-dave.jiang@intel.com>

ghes_handle_aer() copies sizeof(struct aer_capability_regs) out of the
fixed 96-byte pcie_err->aer_info. The struct is larger, so the copy reads
past the section. It also fills the software-only header_len and flit
fields of the embedded struct pcie_tlp_log from raw firmware bytes, and
pcie_print_tlp_log() uses both to bound a loop over dw[], so a large value
walks past the array. Nothing checks that the section can hold a struct
cper_sec_pcie either.

Validate error_data_length, zero the destination, bound the copy to the
96-byte source, and clear header_len and flit, mirroring the
extlog_print_pcie() fix.

Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260714231835.303081-1-dave.jiang@intel.com?part=3
Fixes: 7e077e6707b3 ("PCI/ERR: Handle TLP Log in Flit mode")
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
 drivers/acpi/apei/ghes.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 0cc1e6383635..d6643127a2df 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -642,11 +642,14 @@ static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
 #ifdef CONFIG_ACPI_APEI_PCIEAER
 	struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
 
+	if (gdata->error_data_length < sizeof(*pcie_err))
+		return;
+
 	if (pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID &&
 	    pcie_err->validation_bits & CPER_PCIE_VALID_AER_INFO) {
+		struct aer_capability_regs *aer_info;
 		unsigned int devfn;
 		int aer_severity;
-		u8 *aer_info;
 
 		devfn = PCI_DEVFN(pcie_err->device_id.device,
 				  pcie_err->device_id.function);
@@ -664,13 +667,22 @@ static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
 						  sizeof(struct aer_capability_regs));
 		if (!aer_info)
 			return;
-		memcpy(aer_info, pcie_err->aer_info, sizeof(struct aer_capability_regs));
+
+		/*
+		 * The CPER source is a fixed 96 bytes, shorter than struct
+		 * aer_capability_regs, so bound the copy to it. header_len and
+		 * flit are software-only and land inside those 96 bytes; clear
+		 * them so firmware cannot drive the pcie_print_tlp_log() loop
+		 * over dw[] out of bounds.
+		 */
+		memset(aer_info, 0, sizeof(struct aer_capability_regs));
+		memcpy(aer_info, pcie_err->aer_info, sizeof(pcie_err->aer_info));
+		aer_info->header_log.header_len = 0;
+		aer_info->header_log.flit = false;
 
 		aer_recover_queue(pcie_err->device_id.segment,
 				  pcie_err->device_id.bus,
-				  devfn, aer_severity,
-				  (struct aer_capability_regs *)
-				  aer_info);
+				  devfn, aer_severity, aer_info);
 	}
 #endif
 }
-- 
2.54.0


  parent reply	other threads:[~2026-08-24 17:49 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-24 17:49 [PATCH v4 00/13] ACPI: APEI: GHES: Collection of fixes for issues reported by sashiko Dave Jiang
2026-08-24 17:49 ` [PATCH v4 01/13] efi/cper: Reject CPER records with an out-of-range error_data_length Dave Jiang
2026-08-24 18:10   ` sashiko-bot
2026-08-24 21:57   ` Jonathan Cameron
2026-08-25 16:31     ` Dave Jiang
2026-08-24 17:49 ` [PATCH v4 02/13] efi/cper: Reject an error status block length that wraps a u32 Dave Jiang
2026-08-24 18:03   ` sashiko-bot
2026-08-24 22:22   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 03/13] ACPI: extlog: Validate elog record length before walking sections Dave Jiang
2026-08-24 18:07   ` sashiko-bot
2026-08-24 22:28   ` Jonathan Cameron
2026-08-25 17:15     ` Dave Jiang
2026-08-24 17:49 ` [PATCH v4 04/13] ACPI: extlog: Defer CXL protocol error handling to avoid lock inversion Dave Jiang
2026-08-24 18:03   ` sashiko-bot
2026-08-24 22:29   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 05/13] ACPI: extlog: Avoid populating software AER metadata from raw hardware buffer Dave Jiang
2026-08-24 18:13   ` sashiko-bot
2026-08-24 23:05   ` Jonathan Cameron
2026-08-25 17:38     ` Dave Jiang
2026-08-24 17:49 ` [PATCH v4 06/13] ACPI: extlog: Validate PCIe error section length before payload access Dave Jiang
2026-08-24 18:07   ` sashiko-bot
2026-08-24 23:08   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 07/13] ACPI: extlog: Fix CONFIG_ACPI_APEI_PCIEAER guard typo Dave Jiang
2026-08-24 18:15   ` sashiko-bot
2026-08-24 23:11   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 08/13] ACPI: APEI: GHES: Bound CXL event record copy to the firmware section length Dave Jiang
2026-08-24 23:13   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 09/13] ACPI: APEI: GHES: Validate CXL protocol error section length before RAS cap copy Dave Jiang
2026-08-24 18:10   ` sashiko-bot
2026-08-24 23:14   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 10/13] efi/cper: Read only validated fields in cper_mem_err_pack() Dave Jiang
2026-08-24 18:08   ` sashiko-bot
2026-08-24 17:49 ` [PATCH v4 11/13] ACPI: APEI: GHES: Validate memory error section length before payload access Dave Jiang
2026-08-24 18:17   ` sashiko-bot
2026-08-24 17:49 ` Dave Jiang [this message]
2026-08-24 18:17   ` [PATCH v4 12/13] ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata sashiko-bot
2026-08-24 21:32     ` Dave Jiang
2026-08-24 17:49 ` [PATCH v4 13/13] cxl/ras: Make cxl_cper_handle_prot_err() static Dave Jiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260824174936.939059-13-dave.jiang@intel.com \
    --to=dave.jiang@intel.com \
    --cc=alison.schofield@intel.com \
    --cc=benjamin.cheatham@amd.com \
    --cc=bp@alien8.de \
    --cc=guohanjun@huawei.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=rafael@kernel.org \
    --cc=sashiko-bot@kernel.org \
    --cc=terry.bowman@amd.com \
    --cc=tony.luck@intel.com \
    --cc=xueshuai@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.