[PATCH rtw-next 12/14] wifi: rtw89: regd: check only active vifs when recalculating 6 GHz power type

[Ping-Ke Shih <pkshih@realtek.com>]

From: Zong-Zhe Yang <kevin_yang@realtek.com>

Originally, recalculating 6 GHz power type iterates all vifs including
idle ones and takes an intersection. However, driver chanctx management
will treat idle vifs as ones who also use the first chanctx which might
be 6 GHz. Since idle vifs have no 6 GHz power type, default power type
will be taken for them. Then, intersection result would be the default
one. It means the strictest 6 GHz power type. So, fix it by iterating
only active vifs.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw89/regd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw89/regd.c b/drivers/net/wireless/realtek/rtw89/regd.c
index 14fab6b1a74a..942f55633942 100644
--- a/drivers/net/wireless/realtek/rtw89/regd.c
+++ b/drivers/net/wireless/realtek/rtw89/regd.c
@@ -1091,7 +1091,7 @@ static bool __rtw89_reg_6ghz_power_recalc(struct rtw89_dev *rtwdev)
 	int count = 0;
 	u8 index;
 
-	rtw89_for_each_rtwvif(rtwdev, rtwvif) {
+	rtw89_for_each_active_rtwvif(rtwdev, rtwvif) {
 		rtw89_vif_for_each_link(rtwvif, rtwvif_link, link_id) {
 			chan = rtw89_chan_get(rtwdev, rtwvif_link->chanctx_idx);
 			if (chan->band_type != RTW89_BAND_6G)
-- 
2.25.1