All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] RTC for 7.3
Date: Fri, 28 Aug 2026 00:27:12 +0200	[thread overview]
Message-ID: <202608272227121fa40dbe@mail.local> (raw)

Hello Linus,

Here is the RTC subsystem pull request for 7.3. The RZN1 driver got a
fairly comprehensive cleanup. More DT binding are converted to DT
schema, leaving only 5 remaining files to convert.

The following changes since commit dc59e4fea9d83f03bad6bddf3fa2e52491777482:

  Linux 7.2-rc1 (2026-06-28 12:01:31 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/rtc-7.3

for you to fetch changes up to afce9701d6423a63194a349d2f1e34c50ce76482:

  MAINTAINERS: update rtc subsystem patchwork location (2026-08-27 23:35:24 +0200)

----------------------------------------------------------------
RTC for 7.3

Subsystem:
 - patchwork project is moving to kernel.org
 - fully initialize clk_init_data
 - add missing MODULE_DEVICE_TABLE()
 - DT bindings conversions to DT schema

Drivers:
 - ds1307: fix WADA bit for alarms on RX8130
 - rzn1: add support for RZ/T2H and RZ/N2H, many fixes

----------------------------------------------------------------
Alexandre Belloni (3):
      rtc: mv: fix potential race condition
      rtc: mv: remove mv_rtc_remove
      MAINTAINERS: update rtc subsystem patchwork location

Bhargav Joshi (1):
      dt-bindings: rtc: ti,omap-rtc: Convert to DT schema

Cosmo Chou (1):
      rtc: pcf85363: Add error checking to regmap calls in probe()

Daniel Palmer (1):
      rtc: msc313: Select by default on MSTARV7

Eduard Bostina (1):
      dt-bindings: rtc: Convert TI Palmas RTC to DT schema

Geert Uytterhoeven (5):
      rtc: hym8563: Make sure clk_init_data is fully initialized
      rtc: m41t80: Make sure clk_init_data is fully initialized
      rtc: nct3018y: Make sure clk_init_data is fully initialized
      rtc: philips: Make sure clk_init_data is fully initialized
      rtc: microcrystal: Make sure clk_init_data is fully initialized

Jack Lee (1):
      rtc: ds1343: replace symbolic permissions with octal

Lad Prabhakar (17):
      dt-bindings: rtc: renesas,rzn1-rtc: Add RZ/T2H and RZ/N2H support
      rtc: rzn1: Handle EPROBE_DEFER for optional pps interrupt
      rtc: rzn1: Fix weekday underflow when alarm crosses month boundary
      rtc: rzn1: Handle unset alarm weekday in rzn1_rtc_read_alarm
      rtc: rzn1: Fix alarm range check truncation on 32-bit systems
      rtc: rzn1: Disable alarm interrupt before reprogramming alarm registers
      rtc: rzn1: Fix malformed MODULE_AUTHOR string
      rtc: Kconfig: Broaden RTC_DRV_RZN1 dependency to ARCH_RENESAS
      rtc: rzn1: Use pm_runtime_put_sync()
      rtc: rzn1: Replace remove callback with devm_add_action_or_reset()
      rtc: rzn1: Dynamically calculate synchronization delay based on clock rate
      rtc: rzn1: Use temporary variable for struct device
      rtc: rzn1: Consistently use dev_err_probe()
      rtc: rzn1: use FIELD_PREP/FIELD_GET and GENMASK for register access
      rtc: rzn1: Add OF match data to gate SUBU register access
      rtc: rzn1: Drop trailing comma from OF match table sentinel
      rtc: rzn1: Add support for Renesas RZ/T2H and RZ/N2H SoCs

Linkai Gong (1):
      rtc: gamecube: check return value of devm_rtc_register_device()

Pengpeng Hou (4):
      rtc: zynqmp: Return optional clock lookup errors
      rtc: s32g: add missing MODULE_DEVICE_TABLE()
      rtc: brcmstb-waketimer: add missing MODULE_DEVICE_TABLE()
      rtc: ab-eoz9: add missing MODULE_DEVICE_TABLE()

Robert Leussler (1):
      rtc: ds1307: fix RX8130 wakeup alarm WADA bit for day-of-month mode

Rosen Penev (1):
      rtc: st-lpc: get IRQ via platform_get_irq()

Sang-Heon Jeon (1):
      rtc: pcf2127: remove conditional return with no effect

Surendra Singh Chouhan (1):
      rtc: spacemit: handle regmap_test_bits() error return

Teja Sai Charan Bellamkonda (1):
      dt-bindings: rtc: Convert rtc-cmos binding to YAML

Udaya Kiran Challa (1):
      dt-bindings: rtc: microchip,pic32mzda-rtc: Convert to DT schema

Yi Ding (1):
      rtc: pcf8563: fix clock provider leak on unbind

 .../bindings/rtc/microchip,pic32-rtc.txt           |  21 ---
 .../bindings/rtc/microchip,pic32mzda-rtc.yaml      |  50 ++++++
 .../devicetree/bindings/rtc/renesas,rzn1-rtc.yaml  |  35 +++-
 Documentation/devicetree/bindings/rtc/rtc-cmos.txt |  27 ---
 .../devicetree/bindings/rtc/rtc-cmos.yaml          |  63 +++++++
 Documentation/devicetree/bindings/rtc/rtc-omap.txt |  53 ------
 .../devicetree/bindings/rtc/rtc-palmas.txt         |  32 ----
 .../devicetree/bindings/rtc/ti,omap-rtc.yaml       | 140 +++++++++++++++
 .../devicetree/bindings/rtc/ti,palmas-rtc.yaml     |  57 ++++++
 MAINTAINERS                                        |   2 +-
 drivers/rtc/Kconfig                                |   8 +-
 drivers/rtc/rtc-ab-eoz9.c                          |   1 +
 drivers/rtc/rtc-brcmstb-waketimer.c                |   1 +
 drivers/rtc/rtc-ds1307.c                           |   2 +-
 drivers/rtc/rtc-ds1343.c                           |   4 +-
 drivers/rtc/rtc-gamecube.c                         |   4 +-
 drivers/rtc/rtc-hym8563.c                          |   2 +-
 drivers/rtc/rtc-m41t80.c                           |   2 +-
 drivers/rtc/rtc-mv.c                               |  41 +----
 drivers/rtc/rtc-nct3018y.c                         |   2 +-
 drivers/rtc/rtc-pcf2127.c                          |   7 +-
 drivers/rtc/rtc-pcf85063.c                         |   2 +-
 drivers/rtc/rtc-pcf85363.c                         |  17 +-
 drivers/rtc/rtc-pcf8563.c                          |   6 +-
 drivers/rtc/rtc-rv3028.c                           |   2 +-
 drivers/rtc/rtc-rv3032.c                           |   2 +-
 drivers/rtc/rtc-rzn1.c                             | 197 ++++++++++++---------
 drivers/rtc/rtc-s32g.c                             |   1 +
 drivers/rtc/rtc-spacemit-p1.c                      |   5 +-
 drivers/rtc/rtc-st-lpc.c                           |   9 +-
 drivers/rtc/rtc-zynqmp.c                           |   7 +-
 31 files changed, 507 insertions(+), 295 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/microchip,pic32mzda-rtc.yaml
 delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-cmos.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-cmos.yaml
 delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-omap.txt
 delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-palmas.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/ti,omap-rtc.yaml
 create mode 100644 Documentation/devicetree/bindings/rtc/ti,palmas-rtc.yaml

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

             reply	other threads:[~2026-08-27 22:27 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-27 22:27 Alexandre Belloni [this message]
2026-08-28 17:49 ` [GIT PULL] RTC for 7.3 pr-tracker-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=202608272227121fa40dbe@mail.local \
    --to=alexandre.belloni@bootlin.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.