From: Janani Sunil <janani.sunil@analog.com>
To: "Nuno Sá" <nuno.sa@analog.com>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Olivier Moysan" <olivier.moysan@foss.st.com>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Linus Walleij" <linusw@kernel.org>,
"Bartosz Golaszewski" <brgl@kernel.org>,
"Jonathan Corbet" <corbet@lwn.net>,
"Shuah Khan" <skhan@linuxfoundation.org>,
"Michael Walle" <mwalle@kernel.org>
Cc: linux@analog.com, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-doc@vger.kernel.org,
jananisunil.dev@gmail.com,
"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
"Janani Sunil" <janani.sunil@analog.com>
Subject: [PATCH v5 10/20] iio: adc: ad7768: Add sampling frequency controls
Date: Fri, 28 Aug 2026 17:30:33 +0200 [thread overview]
Message-ID: <20260828-ad7768-driver-v5-10-e33ca6f841a2@analog.com> (raw)
In-Reply-To: <20260828-ad7768-driver-v5-0-e33ca6f841a2@analog.com>
Expose the requested sampling frequency and available rates for each
channel. Validate requests against the rates supported by the power mode
tables and apply them when buffered capture starts.
Signed-off-by: Janani Sunil <janani.sunil@analog.com>
---
drivers/iio/adc/ad7768.c | 116 ++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 109 insertions(+), 7 deletions(-)
diff --git a/drivers/iio/adc/ad7768.c b/drivers/iio/adc/ad7768.c
index 00d6f1dce591..1245ec94b637 100644
--- a/drivers/iio/adc/ad7768.c
+++ b/drivers/iio/adc/ad7768.c
@@ -130,6 +130,9 @@ static const struct ad7768_power_mode_info ad7768_power_modes[] = {
{ .mode = AD7768_POWER_MODE_POWER_MODE_FAST, .mclk_div = 4 },
};
+#define AD7768_MAX_FREQS \
+ (AD7768_MAX_FREQ_PER_MODE + ARRAY_SIZE(ad7768_power_modes))
+
struct ad7768_precharge_config {
bool prebufp_en;
bool prebufn_en;
@@ -167,6 +170,8 @@ struct ad7768_state {
unsigned int power_mode_idx;
const struct ad7768_chip_info *chip_info;
struct ad7768_avail_freq avail_freq[ARRAY_SIZE(ad7768_power_modes)];
+ unsigned int n_freqs;
+ int freqs[AD7768_MAX_FREQS];
unsigned int ch_freq[AD7768_MAX_CHANNEL];
struct iio_backend *back;
unsigned int vref_uV[2];
@@ -496,6 +501,32 @@ static int ad7768_set_lowest_noise_mode(struct ad7768_state *st,
return -EINVAL;
}
+static bool ad7768_freq_supported_in_any_mode(const struct ad7768_state *st,
+ unsigned int freq)
+{
+ for (unsigned int mode_idx = 0;
+ mode_idx < ARRAY_SIZE(ad7768_power_modes); mode_idx++) {
+ if (ad7768_find_freq_config(st, mode_idx, freq))
+ return true;
+ }
+
+ return false;
+}
+
+static int ad7768_set_sampling_freq(struct iio_dev *indio_dev,
+ unsigned int freq, unsigned int channel)
+{
+ struct ad7768_state *st = iio_priv(indio_dev);
+
+ if (!freq || !ad7768_freq_supported_in_any_mode(st, freq))
+ return -EINVAL;
+
+ guard(mutex)(&st->lock);
+ st->ch_freq[channel] = freq;
+
+ return 0;
+}
+
static int ad7768_find_matching_mode(const bool *mode_used,
const unsigned int *mode_freq,
unsigned int freq)
@@ -656,21 +687,74 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
int *val, int *val2, long info)
{
struct ad7768_state *st = iio_priv(indio_dev);
- unsigned int vref_idx;
- if (info != IIO_CHAN_INFO_SCALE)
+ switch (info) {
+ case IIO_CHAN_INFO_SCALE: {
+ unsigned int vref_idx;
+
+ vref_idx = chan->channel >= st->chip_info->num_channels / 2;
+ *val = 2 * st->vref_uV[vref_idx] / 1000;
+ *val2 = chan->scan_type.realbits;
+
+ return IIO_VAL_FRACTIONAL_LOG2;
+ }
+ case IIO_CHAN_INFO_SAMP_FREQ: {
+ guard(mutex)(&st->lock);
+ *val = st->ch_freq[chan->channel];
+
+ return IIO_VAL_INT;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ad7768_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, long info)
+{
+ if (info == IIO_CHAN_INFO_SAMP_FREQ)
+ return IIO_VAL_INT;
+
+ return -EINVAL;
+}
+
+static int ad7768_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long info)
+{
+ IIO_DEV_ACQUIRE_DIRECT_MODE(indio_dev, claim);
+ if (IIO_DEV_ACQUIRE_FAILED(claim))
+ return -EBUSY;
+
+ if (info == IIO_CHAN_INFO_SAMP_FREQ)
+ return ad7768_set_sampling_freq(indio_dev, val, chan->channel);
+
+ return -EINVAL;
+}
+
+static int ad7768_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long info)
+{
+ struct ad7768_state *st = iio_priv(indio_dev);
+
+ if (info != IIO_CHAN_INFO_SAMP_FREQ)
return -EINVAL;
- vref_idx = chan->channel >= st->chip_info->num_channels / 2;
- *val = 2 * st->vref_uV[vref_idx] / 1000;
- *val2 = chan->scan_type.realbits;
+ *vals = st->freqs;
+ *type = IIO_VAL_INT;
+ *length = st->n_freqs;
- return IIO_VAL_FRACTIONAL_LOG2;
+ return IIO_AVAIL_LIST;
}
static const struct iio_info ad7768_info = {
.debugfs_reg_access = ad7768_reg_access,
.read_raw = ad7768_read_raw,
+ .write_raw_get_fmt = ad7768_write_raw_get_fmt,
+ .write_raw = ad7768_write_raw,
+ .read_avail = ad7768_read_avail,
.update_scan_mode = ad7768_update_scan_mode,
};
@@ -743,6 +827,21 @@ static void ad7768_set_available_sampling_freqs(struct ad7768_state *st)
if (st->datalines == 1 &&
st->chip_info->num_channels == AD7768_MAX_CHANNEL)
st->avail_freq[ARRAY_SIZE(ad7768_power_modes) - 1].n_freqs--;
+
+ for (unsigned int mode_idx = 0;
+ mode_idx < ARRAY_SIZE(ad7768_power_modes); mode_idx++) {
+ const struct ad7768_avail_freq *avail_freq;
+
+ avail_freq = &st->avail_freq[mode_idx];
+ for (unsigned int i = 0; i < avail_freq->n_freqs; i++) {
+ unsigned int freq = avail_freq->freq_cfg[i].freq_hz;
+
+ if (st->n_freqs && st->freqs[st->n_freqs - 1] >= freq)
+ continue;
+
+ st->freqs[st->n_freqs++] = freq;
+ }
+ }
}
static int ad7768_init_sampling_freqs(struct ad7768_state *st)
@@ -841,7 +940,10 @@ static int ad7768_parse_config(struct iio_dev *indio_dev,
chan[chan_idx] = (struct iio_chan_spec) {
.type = IIO_VOLTAGE,
- .info_mask_separate = BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_separate = BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_separate_available =
+ BIT(IIO_CHAN_INFO_SAMP_FREQ),
.indexed = 1,
.channel = channel,
.scan_index = channel,
--
2.43.0
next prev parent reply other threads:[~2026-08-28 15:31 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-28 15:30 [PATCH v5 00/20] iio: adc: Add AD7768/AD7768-4 ADC driver support Janani Sunil
2026-08-28 15:30 ` [PATCH v5 01/20] iio: adc: adi-axi-adc: Initialize state mutex Janani Sunil
2026-08-28 15:30 ` [PATCH v5 02/20] dt-bindings: iio: adc: Add AD7768 Janani Sunil
2026-08-28 15:30 ` [PATCH v5 03/20] iio: backend: Add support for CRC Janani Sunil
2026-08-28 15:30 ` [PATCH v5 04/20] iio: adc: adi-axi-adc: " Janani Sunil
2026-08-28 15:30 ` [PATCH v5 05/20] iio: adc: Add AD7768 and AD7768-4 core support Janani Sunil
2026-08-31 9:04 ` Andy Shevchenko
2026-08-31 15:20 ` Janani Sunil
2026-09-01 7:19 ` Andy Shevchenko
2026-08-28 15:30 ` [PATCH v5 06/20] iio: adc: ad7768: Validate master clock rate Janani Sunil
2026-08-28 15:30 ` [PATCH v5 07/20] iio: adc: ad7768: Add power mode helper Janani Sunil
2026-08-31 4:44 ` Andy Shevchenko
2026-08-28 15:30 ` [PATCH v5 08/20] iio: adc: ad7768: Derive output data rates Janani Sunil
2026-08-31 8:09 ` Andy Shevchenko
2026-08-28 15:30 ` [PATCH v5 09/20] iio: adc: ad7768: Configure channel sampling profiles Janani Sunil
2026-08-31 8:18 ` Andy Shevchenko
2026-08-28 15:30 ` Janani Sunil [this message]
2026-08-31 8:24 ` [PATCH v5 10/20] iio: adc: ad7768: Add sampling frequency controls Andy Shevchenko
2026-08-28 15:30 ` [PATCH v5 11/20] iio: adc: ad7768: Add per-channel filter controls Janani Sunil
2026-08-28 15:30 ` [PATCH v5 12/20] iio: adc: ad7768: Wait for digital filters to settle Janani Sunil
2026-08-31 7:45 ` Andy Shevchenko
2026-08-28 15:30 ` [PATCH v5 13/20] iio: adc: ad7768: Add calibration controls Janani Sunil
2026-08-31 8:26 ` Andy Shevchenko
2026-08-28 15:30 ` [PATCH v5 14/20] iio: adc: ad7768: Add per-channel conversion delay Janani Sunil
2026-08-31 8:30 ` Andy Shevchenko
2026-08-28 15:30 ` [PATCH v5 15/20] iio: adc: ad7768: Add VCM regulator support Janani Sunil
2026-08-28 15:30 ` [PATCH v5 16/20] iio: adc: ad7768: Register GPIO auxiliary device Janani Sunil
2026-08-31 8:33 ` Andy Shevchenko
2026-08-28 15:30 ` [PATCH v5 17/20] gpio: regmap: Use regmap_test_bits() for single bit reads Janani Sunil
2026-09-02 13:48 ` Bartosz Golaszewski
2026-09-03 12:08 ` Janani Sunil
2026-08-28 15:30 ` [PATCH v5 18/20] gpio: regmap: Add optional runtime PM support Janani Sunil
2026-08-31 7:15 ` Andy Shevchenko
2026-08-28 15:30 ` [PATCH v5 19/20] gpio: ad7768: Add AD7768 GPIO auxiliary driver Janani Sunil
2026-08-28 15:30 ` [PATCH v5 20/20] Documentation: iio: Add AD7768 Documentation Janani Sunil
2026-08-29 18:19 ` [PATCH v5 00/20] iio: adc: Add AD7768/AD7768-4 ADC driver support Jonathan Cameron
2026-08-30 7:12 ` Andy Shevchenko
2026-09-01 8:32 ` Bartosz Golaszewski
2026-09-01 15:44 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260828-ad7768-driver-v5-10-e33ca6f841a2@analog.com \
--to=janani.sunil@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jananisunil.dev@gmail.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@analog.com \
--cc=mwalle@kernel.org \
--cc=nuno.sa@analog.com \
--cc=olivier.moysan@foss.st.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.