All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Jason Pettit" <jason.pettit@oss.qualcomm.com>
Cc: devicetree@vger.kernel.org, conor+dt@kernel.org, robh@kernel.org
Subject: Re: [PATCH 2/3] arm64: dts: qcom: add HP OmniBook Ultra 14-kg0xxx
Date: Sun, 30 Aug 2026 22:12:51 +0000	[thread overview]
Message-ID: <20260830221252.295271F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260830-x2-hp-omnibook-ship-v1-2-9feada71dc79@oss.qualcomm.com>

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] 1.8V regulator applied to 1.2V and 0.95V pins on the WCN7850 PMU, risking hardware damage.
- [Low] The board device tree references an undefined `&pcie3_phy` label, causing a dtc compilation failure.
--

commit 4454af8cdf9bffc654c2251cf576014586466b4c
Author: Jason Pettit <jason.pettit@oss.qualcomm.com>

arm64: dts: qcom: add HP OmniBook Ultra 14-kg0xxx
    
Add board support for HP OmniBook Ultra 14" Next Gen AI PC
(product SKU D29KLAS#ABA, board 8F03), a Snapdragon X2 Elite (Glymur)
laptop, using the "hp,omnibook-ultra-kg0xxx" / "qcom,glymur" compatible.

> diff --git a/arch/arm64/boot/dts/qcom/glymur-hp-omnibook-ultra-kg0xxx.dts b/arch/arm64/boot/dts/qcom/glymur-hp-omnibook-ultra-kg0xxx.dts
> new file mode 100644
> index 0000000000000..d1c1880a50b9b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/glymur-hp-omnibook-ultra-kg0xxx.dts

[ ... ]

> +	wcn7850-pmu {
> +		compatible = "qcom,wcn7850-pmu";
> +		vdd-supply = <&vreg_wcn_0p95>;
> +		vddaon-supply = <&vreg_l15b_e0_1p8>;
> +		vdddig-supply = <&vreg_l15b_e0_1p8>;
> +		vddio-supply = <&vreg_l15b_e0_1p8>;
> +		vddio1p2-supply = <&vreg_l15b_e0_1p8>;
> +		vddrfa1p2-supply = <&vreg_l15b_e0_1p8>;
> +		vddrfa1p8-supply = <&vreg_l15b_e0_1p8>;

[Severity: High]
Does this apply a 1.8V supply (vreg_l15b_e0_1p8) to pins that structurally
require 1.2V (vddio1p2, vddrfa1p2) and ~0.95V (vddaon, vdddig)?

Over-volting these inputs with a 1.8V supply risks permanently damaging the
WCN7850 PMU or causing system instability. A 1.2V regulator (vreg_l18b_e0_1p2)
is defined in this file but appears incorrectly unused here.

[ ... ]

> +&pcie3_phy {
> +	vdda-phy-supply = <&vreg_l3c_e1_0p94>;
> +	vdda-pll-supply = <&vreg_l2c_e1_1p2>;
> +
> +	vdda-refgen0p9-supply = <&vreg_l1c_e1_0p91>;
> +	vdda-refgen1p2-supply = <&vreg_l4f_e1_1p2>;
> +
> +	status = "okay";
> +};

[Severity: Low]
Does this reference an undefined pcie3_phy label?

Since pcie3_phy is not defined in glymur.dtsi (unlike older SoCs where it
might have been copied from), this reference will cause a dtc compilation
failure when building the device tree.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260830-x2-hp-omnibook-ship-v1-0-9feada71dc79@oss.qualcomm.com?part=2

  reply	other threads:[~2026-08-30 22:12 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-30 21:56 [PATCH 0/3] arm64: dts: qcom: Add HP OmniBook Ultra 14-kg0xxx Jason Pettit
2026-08-30 21:56 ` [PATCH 1/3] dt-bindings: arm: qcom: add " Jason Pettit
2026-09-01  8:26   ` Krzysztof Kozlowski
2026-08-30 21:56 ` [PATCH 2/3] arm64: dts: " Jason Pettit
2026-08-30 22:12   ` sashiko-bot [this message]
2026-08-31  8:30   ` Abel Vesa
2026-09-01 11:13   ` Konrad Dybcio
2026-08-30 21:56 ` [PATCH 3/3] firmware: qcom: scm: add HP OmniBook Ultra 14-kg0xxx to QSEECOM allowlist Jason Pettit
2026-08-31  8:46   ` Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260830221252.295271F000E9@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jason.pettit@oss.qualcomm.com \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.