From: Andrei Lalaev <andrey.lalaev@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrei Lalaev <andrey.lalaev@gmail.com>
Subject: [RFC PATCH 0/6] Add Raspberry Pi 5 initial support
Date: Tue, 01 Sep 2026 17:12:55 +0200 [thread overview]
Message-ID: <20260901-add-rpi5-support-v1-0-129784fe06fa@gmail.com> (raw)
This patchseries adds initial support of Raspberry Pi 5.
Since the most peripheral is routed though RP1 south bridge,
only debug UART and SD card are supported.
Boot log:
NOTICE: BL31: v2.6(release):v2.6-240-gfc45bc492
NOTICE: BL31: Built : 12:55:13, Dec 4 2024
barebox 2026.08.0-00096-g549bcd6aa802 Tue Sep 1 07:54:36 CEST 2026
Board: Raspberry Pi 5
ERROR: regulator-fixed sd-vcc-reg.of: probe permanently deferred
WARNING: sdhci-bcmstb 1000fff000.mmc@fff000.of: Failed to get 'vmmc' regulator (ignored).
sdhci-bcmstb 1000fff000.mmc@fff000.of: registered as mci0
ERROR: regulator-fixed wl-on-reg.of: probe permanently deferred
malloc space: 0x1fd00000 -> 0x3f70ffff (size 506.1 MiB)
mci0: detected SD card version 3.0
mci0: registered disk0
environment load /boot/barebox.env: No such file or directory
Maybe you have to create the partition.
barebox@Raspberry Pi 5 Model B Rev 1.0:/
Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com>
---
Andrei Lalaev (6):
mci: add driver for Broadcom SDHCI
ARM: rpi: add Raspberry Pi 5 support
Documentation: bcm283x: add Raspberry Pi 5 support
arm: dts: bcm2712-rpi: specify clock frequency for uart
arm: dts: bcm2712-rpi: disable wifi SDIO
bcm283x: debug_ll: add Raspberry Pi 5 UART support
Documentation/boards/bcm2835.rst | 4 +-
arch/arm/boards/raspberry-pi/lowlevel.c | 3 +
arch/arm/boards/raspberry-pi/rpi-common.c | 11 ++
arch/arm/configs/rpi_v8a_defconfig | 2 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/bcm2712-rpi-5.dts | 4 +
arch/arm/dts/bcm2712-rpi.dtsi | 14 +++
arch/arm/include/asm/system_info.h | 3 +
arch/arm/mach-bcm283x/Kconfig | 6 ++
arch/arm/mach-bcm283x/core.c | 4 +-
common/Kconfig.debug_ll | 8 ++
drivers/mci/Kconfig | 5 +
drivers/mci/Makefile | 1 +
drivers/mci/bcmstb-sdhci.c | 165 ++++++++++++++++++++++++++++++
include/mach/bcm283x/debug_ll.h | 10 ++
include/mach/bcm283x/mbox.h | 1 +
include/mach/bcm283x/platform.h | 1 +
17 files changed, 240 insertions(+), 3 deletions(-)
---
base-commit: 42e510a258d7c276c35f06c103e685c80d376eab
change-id: 20260901-add-rpi5-support-8bfa43e1c9b7
Best regards,
--
Andrei Lalaev <andrey.lalaev@gmail.com>
next reply other threads:[~2026-09-01 15:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-01 15:12 Andrei Lalaev [this message]
2026-09-01 15:12 ` [PATCH RFC 1/6] mci: add driver for Broadcom SDHCI Andrei Lalaev
2026-09-01 15:12 ` [PATCH RFC 2/6] ARM: rpi: add Raspberry Pi 5 support Andrei Lalaev
2026-09-01 15:12 ` [PATCH RFC 3/6] Documentation: bcm283x: " Andrei Lalaev
2026-09-01 15:12 ` [PATCH RFC 4/6] arm: dts: bcm2712-rpi: specify clock frequency for uart Andrei Lalaev
2026-09-01 15:13 ` [PATCH RFC 5/6] arm: dts: bcm2712-rpi: disable wifi SDIO Andrei Lalaev
2026-09-01 15:13 ` [PATCH RFC 6/6] bcm283x: debug_ll: add Raspberry Pi 5 UART support Andrei Lalaev
2026-09-04 9:38 ` [RFC PATCH 0/6] Add Raspberry Pi 5 initial support Sascha Hauer
2026-09-04 10:36 ` Andrei Lalaev
2026-09-04 11:06 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260901-add-rpi5-support-v1-0-129784fe06fa@gmail.com \
--to=andrey.lalaev@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.