[PATCH v5 3/3] tracing: Update funcgraph-retval documentation

[Donglin Peng <dolinux.peng@gmail.com>]

From: pengdonglin <pengdonglin@xiaomi.com>

The existing documentation for funcgraph-retval is outdated and partially
incorrect, as it describes limitations that have now been resolved.

Recent changes (e.g., using BTF to obtain function return types) have
addressed key issues:
1. Return values are now printed only for non-void functions.
2. Values are trimmed to the correct width of the return type, avoiding
   garbage data from high bits.

Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Xiaoqin Zhang <zhangxiaoqin@xiaomi.com>
Signed-off-by: pengdonglin <pengdonglin@xiaomi.com>
---
 Documentation/trace/ftrace.rst | 88 +++++++++++++++++++---------------
 1 file changed, 50 insertions(+), 38 deletions(-)

diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst
index 7261f25f8b4b..696bfbede590 100644
--- a/Documentation/trace/ftrace.rst
+++ b/Documentation/trace/ftrace.rst
@@ -1483,6 +1483,10 @@ Options for function_graph tracer:
 	printed in hexadecimal format. By default, this option
 	is off.
 
+  funcgraph-retaddr
+	When set, the return address will always be printed.
+	By default, this option is off.
+
   sleep-time
 	When running function graph tracer, to include
 	the time a task schedules out in its function.
@@ -2829,7 +2833,7 @@ It is default disabled.
     0)   2.861 us    |      } /* putname() */
 
 The return value of each traced function can be displayed after
-an equal sign "=". When encountering system call failures, it
+an equal sign "ret=". When encountering system call failures, it
 can be very helpful to quickly locate the function that first
 returns an error code.
 
@@ -2839,16 +2843,16 @@ returns an error code.
   Example with funcgraph-retval::
 
     1)               |    cgroup_migrate() {
-    1)   0.651 us    |      cgroup_migrate_add_task(); /* = 0xffff93fcfd346c00 */
+    1)   0.651 us    |      cgroup_migrate_add_task(); /* ret=0xffff93fcfd346c00 */
     1)               |      cgroup_migrate_execute() {
     1)               |        cpu_cgroup_can_attach() {
     1)               |          cgroup_taskset_first() {
-    1)   0.732 us    |            cgroup_taskset_next(); /* = 0xffff93fc8fb20000 */
-    1)   1.232 us    |          } /* cgroup_taskset_first = 0xffff93fc8fb20000 */
-    1)   0.380 us    |          sched_rt_can_attach(); /* = 0x0 */
-    1)   2.335 us    |        } /* cpu_cgroup_can_attach = -22 */
-    1)   4.369 us    |      } /* cgroup_migrate_execute = -22 */
-    1)   7.143 us    |    } /* cgroup_migrate = -22 */
+    1)   0.732 us    |            cgroup_taskset_next(); /* ret=0xffff93fc8fb20000 */
+    1)   1.232 us    |          } /* cgroup_taskset_first ret=0xffff93fc8fb20000 */
+    1)   0.380 us    |          sched_rt_can_attach(); /* ret=0x0 */
+    1)   2.335 us    |        } /* cpu_cgroup_can_attach ret=-22 */
+    1)   4.369 us    |      } /* cgroup_migrate_execute ret=-22 */
+    1)   7.143 us    |    } /* cgroup_migrate ret=-22 */
 
 The above example shows that the function cpu_cgroup_can_attach
 returned the error code -22 firstly, then we can read the code
@@ -2865,37 +2869,41 @@ printed in hexadecimal format.
   Example with funcgraph-retval-hex::
 
     1)               |      cgroup_migrate() {
-    1)   0.651 us    |        cgroup_migrate_add_task(); /* = 0xffff93fcfd346c00 */
+    1)   0.651 us    |        cgroup_migrate_add_task(); /* ret=0xffff93fcfd346c00 */
     1)               |        cgroup_migrate_execute() {
     1)               |          cpu_cgroup_can_attach() {
     1)               |            cgroup_taskset_first() {
-    1)   0.732 us    |              cgroup_taskset_next(); /* = 0xffff93fc8fb20000 */
-    1)   1.232 us    |            } /* cgroup_taskset_first = 0xffff93fc8fb20000 */
-    1)   0.380 us    |            sched_rt_can_attach(); /* = 0x0 */
-    1)   2.335 us    |          } /* cpu_cgroup_can_attach = 0xffffffea */
-    1)   4.369 us    |        } /* cgroup_migrate_execute = 0xffffffea */
-    1)   7.143 us    |      } /* cgroup_migrate = 0xffffffea */
-
-At present, there are some limitations when using the funcgraph-retval
-option, and these limitations will be eliminated in the future:
-
-- Even if the function return type is void, a return value will still
-  be printed, and you can just ignore it.
-
-- Even if return values are stored in multiple registers, only the
-  value contained in the first register will be recorded and printed.
-  To illustrate, in the x86 architecture, eax and edx are used to store
-  a 64-bit return value, with the lower 32 bits saved in eax and the
-  upper 32 bits saved in edx. However, only the value stored in eax
-  will be recorded and printed.
-
-- In certain procedure call standards, such as arm64's AAPCS64, when a
-  type is smaller than a GPR, it is the responsibility of the consumer
-  to perform the narrowing, and the upper bits may contain UNKNOWN values.
-  Therefore, it is advisable to check the code for such cases. For instance,
-  when using a u8 in a 64-bit GPR, bits [63:8] may contain arbitrary values,
-  especially when larger types are truncated, whether explicitly or implicitly.
-  Here are some specific cases to illustrate this point:
+    1)   0.732 us    |              cgroup_taskset_next(); /* ret=0xffff93fc8fb20000 */
+    1)   1.232 us    |            } /* cgroup_taskset_first ret=0xffff93fc8fb20000 */
+    1)   0.380 us    |            sched_rt_can_attach(); /* ret=0x0 */
+    1)   2.335 us    |          } /* cpu_cgroup_can_attach ret=0xffffffea */
+    1)   4.369 us    |        } /* cgroup_migrate_execute ret=0xffffffea */
+    1)   7.143 us    |      } /* cgroup_migrate ret=0xffffffea */
+
+Note that there are some limitations when using the funcgraph-retval
+option:
+
+- If CONFIG_DEBUG_INFO_BTF is disabled (n), a return value is printed even for
+  functions with a void return type. When CONFIG_DEBUG_INFO_BTF is enabled (y),
+  the return value is printed only for non-void functions.
+
+- If a return value occupies multiple registers, only the value in the first
+  register is recorded and printed. For example, on the x86 architecture, a
+  64-bit return value is stored across eax (lower 32 bits) and edx (upper 32 bits),
+  but only the contents of eax are captured. If CONFIG_DEBUG_INFO_BTF is enabled,
+  the suffix "(trunc)" is appended to the printed value to indicate that the
+  output may be truncated because high-order register contents are omitted.
+
+- Under certain procedure-call standards (e.g., arm64's AAPCS64), when the return
+  type is smaller than a general-purpose register (GPR), the caller is responsible
+  for narrowing the value; the upper bits of the register may contain undefined data.
+  For instance, when a u8 is returned in 64-bit GPR, bits [63:8] can hold arbitrary
+  values, especially when larger types are truncated (explicitly or implicitly). It
+  is therefore advisable to inspect the code in such cases. If CONFIG_DEBUG_INFO_BTF
+  is enabled (y), the return value is automatically trimmed to the width of the return
+  type.
+
+  The following examples illustrate the behavior:
 
   **Case One**:
 
@@ -2914,7 +2922,9 @@ option, and these limitations will be eliminated in the future:
 		RET
 
   If you pass 0x123456789abcdef to this function and want to narrow it,
-  it may be recorded as 0x123456789abcdef instead of 0xef.
+  it may be recorded as 0x123456789abcdef instead of 0xef. When
+  CONFIG_DEBUG_INFO_BTF is enabled, the value will be correctly truncated
+  to 0xef based on the size constraints of the u8 type.
 
   **Case Two**:
 
@@ -2939,7 +2949,9 @@ option, and these limitations will be eliminated in the future:
 		RET
 
   When passing 0x2_0000_0000 to it, the return value may be recorded as
-  0x2_0000_0000 instead of 0.
+  0x2_0000_0000 instead of 0. When CONFIG_DEBUG_INFO_BTF is enabled, the
+  value will be correctly truncated to 0 based on the size constraints of
+  the int type.
 
 You can put some comments on specific functions by using
 trace_printk() For example, if you want to put a comment inside
-- 
2.34.1