From: sashiko-bot@kernel.org
To: "Thara Gopinath" <tgopinath@linux.microsoft.com>
Cc: linux-hyperv@vger.kernel.org
Subject: Re: [RFC PATCH 09/12] drivers: hv: hv_vsm_boot: Enable VTL1 on the boot processor
Date: Tue, 01 Sep 2026 17:36:03 +0000 [thread overview]
Message-ID: <20260901173604.66DAC1F00A3E@smtp.kernel.org> (raw)
In-Reply-To: <20260901165647.3160413-10-tgopinath@linux.microsoft.com>
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
New issues:
- [High] Unconditional loading of the secure kernel overwrites VTL1 memory even if VTL1 is already active, leading to memory corruption or fatal faults.
Pre-existing issues:
- [High] Missing bounds check when parsing ELF program headers from firmware, leading to potential out-of-bounds read.
--
commit 58f06b8de69e2f750e55a8ff7220ab38d88c0f8f
Author: Thara Gopinath <tgopinath@linux.microsoft.com>
drivers: hv: hv_vsm_boot: Enable VTL1 on the boot processor
This commit introduces helpers to get VP status and enable VTL1 on the boot
virtual processor. It extends hv_vsm_bootstrap_vtl() to enable VTL1 on the
boot VP if it is not already enabled, and re-queries the status to confirm
the transition.
> diff --git a/drivers/hv/hv_vsm_boot.c b/drivers/hv/hv_vsm_boot.c
> index dc20f935da5b2..abe82e03e1897 100644
> --- a/drivers/hv/hv_vsm_boot.c
> +++ b/drivers/hv/hv_vsm_boot.c
> @@ -216,6 +216,47 @@ static int __init hv_vsm_load_secure_kernel(Elf64_Addr *sk_entry_pa)
> return ret;
> }
[Severity: High]
This isn't a bug introduced by this patch, but there appears to be a missing
bounds check when parsing ELF program headers from the firmware in
hv_vsm_load_elf() which is called by hv_vsm_load_secure_kernel().
The firmware size (fw->size) is discarded instead of being passed to
hv_vsm_load_elf() for validation. Inside hv_vsm_load_elf(), the program header
table offset (e_phoff) is never bounds-checked against the firmware size before
being iterated over:
drivers/hv/hv_vsm_boot.c:hv_vsm_load_elf() {
...
Elf64_Phdr *phdr = image + ehdr->e_phoff;
...
}
Later, the memcpy() copies uncontrolled lengths of kernel memory based on
untrusted firmware headers:
drivers/hv/hv_vsm_boot.c:hv_vsm_load_elf() {
...
memcpy(load_addr, image + phdr->p_offset, phdr->p_filesz);
...
}
Could a malformed or maliciously crafted firmware file cause an out-of-bounds
read past the end of the firmware buffer, potentially leaking sensitive kernel
data into the secure kernel's memory or causing a kernel panic?
[ ... ]
> @@ -300,7 +342,34 @@ static int __init hv_vsm_bootstrap_vtl(void)
> }
> }
>
> - return hv_vsm_load_secure_kernel(&sk_entry_pa);
> + ret = hv_vsm_load_secure_kernel(&sk_entry_pa);
> + if (ret)
> + return ret;
> +
> + /* Check and enable VTL1 for the primary virtual processor */
> + ret = hv_vsm_get_vp_status(&vp_enabled_vtl_set, &active_mbec_enabled);
> + if (ret)
> + return ret;
> +
> + if (vp_enabled_vtl_set & HV_VTL1_ENABLE_BIT) {
> + pr_info("VP VTL1 is already enabled\n");
[Severity: High]
If VTL1 is already enabled, does calling hv_vsm_load_secure_kernel() earlier
in this function overwrite the memory of the currently running VTL1 secure
kernel?
Since hv_vsm_load_secure_kernel() is called unconditionally before checking if
VP VTL1 is active, could unconditionally loading the secure kernel ELF image
cause a regression by triggering a fatal hypervisor intercept/fault in VTL0,
or silently corrupting the active VTL1 (such as during a kexec reboot)?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260901165647.3160413-1-tgopinath@linux.microsoft.com?part=9
next prev parent reply other threads:[~2026-09-01 17:36 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-01 16:55 [RFC PATCH 00/12] Introduce LVBS support for Hyper-V guests Thara Gopinath
2026-09-01 16:55 ` [RFC PATCH 01/12] drivers: hv: Add HYPERV_VSM kconfig option Thara Gopinath
2026-09-01 16:55 ` [RFC PATCH 02/12] drivers: hv: hv_common: Allocate Hyper-V output arg page when VSM is enabled Thara Gopinath
2026-09-01 17:12 ` sashiko-bot
2026-09-01 22:56 ` Wei Liu
2026-09-01 16:55 ` [RFC PATCH 03/12] drivers: hv: Reserve memory for VSM secure kernel during early boot Thara Gopinath
2026-09-01 17:10 ` sashiko-bot
2026-09-02 0:59 ` Wei Liu
2026-09-02 13:38 ` Thara Gopinath
2026-09-01 16:55 ` [RFC PATCH 04/12] firmware: efi: libstub: x86-stub: Enable VSM awareness in efi os indications variable Thara Gopinath
2026-09-01 17:09 ` sashiko-bot
2026-09-02 1:09 ` Wei Liu
2026-09-02 14:23 ` Thara Gopinath
2026-09-01 16:55 ` [RFC PATCH 05/12] include: hyperv: hvgdk_mini.h: Add VTL-specific structures and bits Thara Gopinath
2026-09-01 16:55 ` [RFC PATCH 06/12] drivers: hv: Add VSM boot driver and enable VTL1 at the partition level Thara Gopinath
2026-09-01 17:24 ` sashiko-bot
2026-09-02 1:16 ` Wei Liu
2026-09-02 14:28 ` Thara Gopinath
2026-09-02 4:43 ` Wei Liu
2026-09-04 13:23 ` Thara Gopinath
2026-09-01 16:55 ` [RFC PATCH 07/12] drivers: hv: hv_vsm_boot: load secure kernel image from firmware Thara Gopinath
2026-09-01 17:20 ` sashiko-bot
2026-09-02 4:37 ` Wei Liu
2026-09-02 16:22 ` Thara Gopinath
2026-09-02 22:58 ` Wei Liu
2026-09-01 16:55 ` [RFC PATCH 08/12] arch: x86: hyperv: Build initial vCPU context for VTL1 secure kernel Thara Gopinath
2026-09-01 17:25 ` sashiko-bot
2026-09-01 16:55 ` [RFC PATCH 09/12] drivers: hv: hv_vsm_boot: Enable VTL1 on the boot processor Thara Gopinath
2026-09-01 17:36 ` sashiko-bot [this message]
2026-09-01 16:55 ` [RFC PATCH 10/12] arch: x86: hyperv: hv_vtl_vsm: Introduce vtlcall Thara Gopinath
2026-09-01 16:55 ` [RFC PATCH 11/12] drivers: hv: hv_vsm_boot: Boot primary processor in VTL1 Thara Gopinath
2026-09-01 17:35 ` sashiko-bot
2026-09-01 16:55 ` [RFC PATCH 12/12] drivers: hv: hv_vsm_boot: Boot secondary processors " Thara Gopinath
2026-09-01 17:44 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260901173604.66DAC1F00A3E@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=tgopinath@linux.microsoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.