[PATCH] media: ipu-bridge: do not use the CVS device lookup for IVSC

[Sergey Zagursky <gvozdoder@gmail.com>]

Since commit c6b1b34b5090 ("media: pci: intel: Add CVS support for IPU
bridge driver") the internal camera no longer works on laptops where the
sensor sits behind an IVSC, for example a Dell XPS 16 9640 (IPU6,
INTC10CF, ov02c10):

  intel-ipu6 0000:00:05.0: Found supported sensor OVTI02C1:00
  intel-ipu6 0000:00:05.0: Connected 1 cameras
  ivsc_csi intel_vsc-92335fcf-3203-4472-af93-7b4453ac29da: mei-csi probed
      without device fwnode!

No sensor subdevice is registered, the media graph has no sensor entity
and userspace finds no camera at all.

ipu_bridge_get_ivsc_csi_dev() first looks for the platform device named
"intel_vsc" and returns its mei-csi child. That device is created by
mei_vsc, which on this machine only appears once the LJCA USB bridge and
its SPI controller have probed, about a second after the IPU6 probe that
runs the bridge:

  07:59:29.297  platform INTC10CF:00 created (ACPI scan)
  07:59:41      intel-ipu6 probe -> ipu_bridge_init()
  07:59:42.391  platform intel_vsc created (mei_vsc)

The commit above added two fallbacks for CVS which match on the ACPI
companion alone. They are reached for every entry of ivsc_acpi_ids[],
IVSC IDs included. The IVSC ACPI device has two physical nodes:

  INTC10CF:00/physical_node  -> platform/INTC10CF:00  (no driver bound)
  INTC10CF:00/physical_node1 -> platform/intel_vsc    (mei_vsc)

so bus_find_device_by_acpi_dev(&platform_bus_type, adev) returns the bare
platform device. ipu_bridge_instantiate_ivsc() then attaches the IVSC
software node to that device instead of to the mei-csi client, the bridge
reports success, and the probe is never retried. mei_csi later probes
without a fwnode, the CSI-2 link is never described, and the sensor ACPI
device, which has an honoured _DEP on the IVSC device, is never
enumerated.

Before those fallbacks existed the lookup returned NULL here, the bridge
failed with -ENODEV and the probe was retried once the IVSC device had
shown up.

Restrict the two fallbacks to the CVS IDs. CVS binds a driver to the ACPI
device itself, so matching on the companion is unambiguous there.

Fixes: c6b1b34b5090 ("media: pci: intel: Add CVS support for IPU bridge driver")
Link: https://lore.kernel.org/linux-media/20260901194526.6369-1-gvozdoder@gmail.com/
Cc: stable@vger.kernel.org
Assisted-by: Claude Code:claude-opus-5
Signed-off-by: Sergey Zagursky <gvozdoder@gmail.com>
---
Tested on the affected machine (Dell XPS 16 9640, IPU6 + IVSC + ov02c10) on
top of 7.2.2, where drivers/media/pci/intel/ipu-bridge.c is byte-identical
to v7.2. Without the patch libcamera finds no camera at all; with it:

  $ cam -l
  1: Internal front camera (\_SB_.PC00.LNK1)

  $ cam -c1 --capture=5
  202.794954 (30.05 fps) cam0-stream0 seq: 000003 bytesused: 8386560
  202.828224 (30.06 fps) cam0-stream0 seq: 000004 bytesused: 8386560

The media graph gains the entities that were missing:

  - entity 349: Intel IVSC CSI (2 pads, 2 links, 0 routes)
  - entity 368: ov02c10 21-0036 (1 pad, 1 link, 0 routes)

and the restored retry is visible in dmesg:

  pci 0000:00:05.0: deferred probe pending: intel-ipu6: IPU6 bridge init failed
  intel-ipu6 0000:00:05.0: Found supported sensor OVTI02C1:00
  intel-ipu6 0000:00:05.0: Connected 1 cameras

"mei-csi probed without device fwnode!" is gone, ov02c10 binds to
i2c-OVTI02C1:00, and eight v4l-subdev nodes appear.

This patch is against v7.3-rc1. The version tested on 7.2.2 is the same
change without the INTC10FA entry, which 7.2.x does not have. Building
drivers/media/pci/intel/ipu-bridge.c with W=1 produces no new warnings.

Not covered: I have no CVS hardware, so the CVS path is only reasoned
about, not tested, and I have not booted v7.3-rc1 itself.

This patch was produced with the help of an AI coding assistant; see the
Assisted-by tag above and Documentation/process/generated-content.rst. The
bug report this replies to describes what the tool did.

 drivers/media/pci/intel/ipu-bridge.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 1bb3a3e98d6b..2c3b9efb0b2f 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -232,6 +232,15 @@ static const struct acpi_device_id ivsc_acpi_ids[] = {
 	{ "INTC10FA" }, /* NVL */
 };
 
+/* The subset of ivsc_acpi_ids[] which are CVS, rather than IVSC, devices. */
+static const struct acpi_device_id cvs_acpi_ids[] = {
+	{ "INTC10DE" }, /* LNL */
+	{ "INTC10E0" }, /* ARL */
+	{ "INTC10E1" }, /* PTL */
+	{ "INTC10FA" }, /* NVL */
+	{ }
+};
+
 static struct acpi_device *ipu_bridge_get_ivsc_acpi_dev(struct acpi_device *adev)
 {
 	unsigned int i;
@@ -283,6 +292,17 @@ static struct device *ipu_bridge_get_ivsc_csi_dev(struct acpi_device *adev)
 		return csi_dev;
 	}
 
+	/*
+	 * The lookups below match on the ACPI companion alone. That is fine for
+	 * CVS, which binds a driver to that very device, but not for IVSC: there
+	 * the ACPI device also has a driverless platform device, which would be
+	 * returned instead of the mei-csi client. Return NULL for IVSC so that
+	 * the caller fails and the probe is retried once the IVSC device shows
+	 * up.
+	 */
+	if (acpi_match_device_ids(adev, cvs_acpi_ids))
+		return NULL;
+
 	/* Try to locate CVS device on the I2C bus */
 	csi_dev = bus_find_device_by_acpi_dev(&i2c_bus_type, adev);
 	if (csi_dev)
-- 
2.55.0