From: "Bastien Curutchet (Schneider Electric)" <bastien.curutchet@bootlin.com>
To: Woojung Huh <woojung.huh@microchip.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Richard Cochran <richardcochran@gmail.com>
Cc: "Pascal Eberhard" <pascal.eberhard@se.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Bastien Curutchet (Schneider Electric)"
<bastien.curutchet@bootlin.com>
Subject: [PATCH net-next v2 02/10] net: dsa: microchip: add the number of periodic signals to chip infos
Date: Wed, 02 Sep 2026 11:57:32 +0200 [thread overview]
Message-ID: <20260902-ksz-perout-v2-2-6f277fcc9e68@bootlin.com> (raw)
In-Reply-To: <20260902-ksz-perout-v2-0-6f277fcc9e68@bootlin.com>
The number of periodic signals available is hardcoded to 3 while
KSZ8463 can produce 12 different periodic signals.
Add an n_per_out attribute to the struct ksz_chip_data to make this
setting configurable.
Set it to 3 for all the PTP-capable switches.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
---
drivers/net/dsa/microchip/ksz_common.c | 10 ++++++++++
drivers/net/dsa/microchip/ksz_common.h | 1 +
drivers/net/dsa/microchip/ksz_ptp.c | 2 +-
3 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index d01fba253af5..041bb4f96365 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -1195,6 +1195,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.wr_table = &ksz8563_register_set,
.rd_table = &ksz8563_register_set,
.n_pins = 2,
+ .n_per_out = 3,
},
[KSZ8795] = {
@@ -1416,6 +1417,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.wr_table = &ksz9477_register_set,
.rd_table = &ksz9477_register_set,
.n_pins = 2,
+ .n_per_out = 3,
},
[KSZ9896] = {
@@ -1547,6 +1549,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.gbit_capable = {true, true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[KSZ8567] = {
@@ -1585,6 +1588,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[KSZ9567] = {
@@ -1620,6 +1624,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.gbit_capable = {true, true, true, true, true, true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9370] = {
@@ -1652,6 +1657,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.internal_phy = {true, true, true, true, false},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9371] = {
@@ -1684,6 +1690,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.internal_phy = {true, true, true, true, false, false},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9372] = {
@@ -1720,6 +1727,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
false, false, true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9373] = {
@@ -1756,6 +1764,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
false, false, true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9374] = {
@@ -1792,6 +1801,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
false, false, true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9646] = {
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index c678fc6597dc..1155b39350c2 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -140,6 +140,7 @@ struct ksz_chip_data {
const struct regmap_access_table *wr_table;
const struct regmap_access_table *rd_table;
const u8 n_pins;
+ const u8 n_per_out;
};
struct ksz_irq {
diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c
index c92936bf78d3..f80015250e5a 100644
--- a/drivers/net/dsa/microchip/ksz_ptp.c
+++ b/drivers/net/dsa/microchip/ksz_ptp.c
@@ -1051,7 +1051,7 @@ int ksz_ptp_clock_register(struct dsa_switch *ds)
ptp_data->caps.enable = ksz_ptp_enable;
ptp_data->caps.verify = ksz_ptp_verify_pin;
ptp_data->caps.n_pins = dev->info->n_pins;
- ptp_data->caps.n_per_out = 3;
+ ptp_data->caps.n_per_out = dev->info->n_per_out;
ret = ksz_ptp_start_clock(dev);
if (ret)
--
2.55.0
next prev parent reply other threads:[~2026-09-02 9:57 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-02 9:57 [PATCH net-next v2 00/10] net: dsa: microchip: add periodic output support for the KSZ8463 Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 01/10] net: dsa: microchip: add the number of pins to chip infos Bastien Curutchet (Schneider Electric)
2026-09-05 1:55 ` netdev-bot+sashiko
2026-09-02 9:57 ` Bastien Curutchet (Schneider Electric) [this message]
2026-09-05 1:55 ` [PATCH net-next v2 02/10] net: dsa: microchip: add the number of periodic signals " netdev-bot+sashiko
2026-09-02 9:57 ` [PATCH net-next v2 03/10] net: dsa: microchip: use dynamic mask to check pulse width validity Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 04/10] net: dsa: microchip: extract PTP callbacks configuration from PTP registration Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 05/10] net: dsa: microchip: extract ptp_get_pin Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 06/10] net: dsa: microchip: extract compute_width Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 07/10] net: dsa: microchip: extract prepare reset Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 08/10] net: dsa: microchip: extract time update Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 09/10] net: dsa: microchip: extract time adjustment Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 10/10] net: dsa: microchip: add periodic output support for the KSZ8463 Bastien Curutchet (Schneider Electric)
2026-09-05 1:55 ` netdev-bot+sashiko
2026-09-07 8:43 ` Bastien Curutchet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260902-ksz-perout-v2-2-6f277fcc9e68@bootlin.com \
--to=bastien.curutchet@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=pascal.eberhard@se.com \
--cc=richardcochran@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.