All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stanley Jhu <stanleyjhu@google.com>
To: linux-scsi@vger.kernel.org
Cc: "Martin K . Petersen" <martin.petersen@oracle.com>,
	Bart Van Assche <bvanassche@acm.org>,
	 Alim Akhtar <alim.akhtar@samsung.com>,
	Avri Altman <avri.altman@sandisk.com>,
	 Stanley Jhu <stanleyjhu@google.com>,
	stable@vger.kernel.org
Subject: [PATCH] scsi: ufs: core: Quiesce SCSI devices instead of host tagset during error handling
Date: Wed,  2 Sep 2026 16:23:06 +0800	[thread overview]
Message-ID: <20260902082306.2299159-1-stanleyjhu@google.com> (raw)

Commit 08b12cda6c44 ("scsi: ufs: core: Switch to scsi_get_internal_cmd()")
switched UFS internal commands to allocate requests on
hba->host->pseudo_sdev->request_queue, which shares the host tagset with
regular LUNs.

During error recovery, ufshcd_err_handling_prepare() calls
blk_mq_quiesce_tagset(&hba->host->tag_set), marking all queues in the
tagset as quiesced, including pseudo_sdev->request_queue. When
ufshcd_verify_dev_init() subsequently issues internal commands (e.g. NOP
OUT UPIU) via blk_execute_rq(), blk_mq_run_hw_queue() skips running the
quiesced queue, resulting in an unrecoverable circular wait deadlock.

Resolve this by quiescing only logical units attached to the host via
shost_for_each_device() during error handling. Because
shost_for_each_device() explicitly skips pseudo SCSI devices (via
scsi_device_is_pseudo_dev() in __scsi_iterate_devices()), regular LUNs
are quiesced to prevent retry storms, while pseudo_sdev remains
unquiesced so internal commands can be dispatched and completed during
error recovery.

Clock scaling and command pause (ufshcd_pause_command_processing) paths
continue to use blk_mq_quiesce_tagset() as they require freezing all
queues including internal commands.

Fixes: 08b12cda6c44 ("scsi: ufs: core: Switch to scsi_get_internal_cmd()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/alpine.DEB.2.22.394.2609010729350.218556@hyperv.ins.bvanassche.us/
Signed-off-by: Stanley Jhu <stanleyjhu@google.com>
---
 drivers/ufs/core/ufshcd.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 2ba244cf40ac..11488c5efb47 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -6798,6 +6798,23 @@ static void ufshcd_clk_scaling_suspend(struct ufs_hba *hba, bool suspend)
 	}
 }
 
+static void ufshcd_quiesce_all_sdevs(struct ufs_hba *hba)
+{
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, hba->host)
+		blk_mq_quiesce_queue_nowait(sdev->request_queue);
+	blk_mq_wait_quiesce_done(&hba->host->tag_set);
+}
+
+static void ufshcd_unquiesce_all_sdevs(struct ufs_hba *hba)
+{
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, hba->host)
+		blk_mq_unquiesce_queue(sdev->request_queue);
+}
+
 static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
 {
 	/*
@@ -6833,7 +6850,7 @@ static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
 		ufshcd_clk_scaling_allow(hba, false);
 	}
 	/* Wait for ongoing ufshcd_queuecommand() calls to finish. */
-	blk_mq_quiesce_tagset(&hba->host->tag_set);
+	ufshcd_quiesce_all_sdevs(hba);
 	cancel_work_sync(&hba->eeh_work);
 }
 
@@ -6840,7 +6857,7 @@ static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
 static void ufshcd_err_handling_unprepare(struct ufs_hba *hba)
 {
-	blk_mq_unquiesce_tagset(&hba->host->tag_set);
+	ufshcd_unquiesce_all_sdevs(hba);
 	ufshcd_release(hba);
 	if (ufshcd_is_clkscaling_supported(hba))
 		ufshcd_clk_scaling_suspend(hba, false);
-- 
2.43.0

             reply	other threads:[~2026-09-02  8:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-02  8:23 Stanley Jhu [this message]
2026-09-11 15:52 ` [PATCH] scsi: ufs: core: Quiesce SCSI devices instead of host tagset during error handling Bart Van Assche

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260902082306.2299159-1-stanleyjhu@google.com \
    --to=stanleyjhu@google.com \
    --cc=alim.akhtar@samsung.com \
    --cc=avri.altman@sandisk.com \
    --cc=bvanassche@acm.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.