[PATCH] arm64: dts: imx: Switch Data Modul i.MX8M eDM SBC to OF_UPSTREAM

[Marek Vasut <marex@nabladev.com>]

Convert the Data Modul i.MX8M Mini/Plus eDM SBC to OF_UPSTREAM.
This is almost straightforward, except for the handling of legacy
variants of the board, which is implemented programatically in the
board code and requires imx8mm-data-modul-edm-sbc-u-boot.dtsi to
re-enabled the old Atheros PHY usage by default.

Signed-off-by: Marek Vasut <marex@nabladev.com>
---
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@nabladev.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: u-boot@lists.u-boot-project.org
---
 arch/arm/dts/Makefile                         |   2 -
 .../dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi |  12 +
 arch/arm/dts/imx8mm-data-modul-edm-sbc.dts    | 997 ------------------
 .../dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi |   2 +-
 arch/arm/dts/imx8mp-data-modul-edm-sbc.dts    | 972 -----------------
 configs/imx8m_data_modul.config               |   1 +
 configs/imx8mm_data_modul_edm_sbc_defconfig   |   2 +-
 configs/imx8mp_data_modul_edm_sbc_defconfig   |   2 +-
 8 files changed, 16 insertions(+), 1974 deletions(-)
 delete mode 100644 arch/arm/dts/imx8mm-data-modul-edm-sbc.dts
 delete mode 100644 arch/arm/dts/imx8mp-data-modul-edm-sbc.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a02dad22f27..90e435d939d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -850,10 +850,8 @@ dtb-$(CONFIG_ARCH_IMX8) += \
 	imx8-capricorn-cxg3.dtb \
 
 dtb-$(CONFIG_ARCH_IMX8M) += \
-	imx8mm-data-modul-edm-sbc.dtb \
 	imx8mm-mx8menlo.dtb \
 	imx8mq-cm.dtb \
-	imx8mp-data-modul-edm-sbc.dtb \
 	imx8mp-dhcom-som-overlay-rev100.dtbo \
 	imx8mp-dhcom-som-overlay-eth1xfast.dtbo \
 	imx8mp-dhcom-som-overlay-eth2xfast.dtbo \
diff --git a/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi b/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
index 3a4f7d01b9e..07725de43ac 100644
--- a/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
@@ -86,6 +86,18 @@
 	};
 };
 
+&fec1 {
+	phy-handle = <&fec1_phy_ath>;
+};
+
+&fec1_phy_ath {
+	status = "okay";
+};
+
+&fec1_phy_bcm {
+	status = "disabled";
+};
+
 &gpio1 {
 	bootph-pre-ram;
 };
diff --git a/arch/arm/dts/imx8mm-data-modul-edm-sbc.dts b/arch/arm/dts/imx8mm-data-modul-edm-sbc.dts
deleted file mode 100644
index 778bdbe228d..00000000000
--- a/arch/arm/dts/imx8mm-data-modul-edm-sbc.dts
+++ /dev/null
@@ -1,997 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/net/qca-ar803x.h>
-#include <dt-bindings/phy/phy-imx8-pcie.h>
-#include "imx8mm.dtsi"
-
-/ {
-	model = "Data Modul i.MX8M Mini eDM SBC";
-	compatible = "dmo,imx8mm-data-modul-edm-sbc", "fsl,imx8mm";
-
-	aliases {
-		rtc0 = &rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		/* There are 1/2/4 GiB options, adjusted by bootloader. */
-		reg = <0x0 0x40000000 0 0x40000000>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_panel_backlight>;
-		brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm1 0 5000000 0>;
-		/* Disabled by default, unless display board plugged in. */
-		status = "disabled";
-	};
-
-	clk_xtal25: clk-xtal25 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	panel: panel {
-		backlight = <&backlight>;
-		power-supply = <&reg_panel_vcc>;
-		/* Disabled by default, unless display board plugged in. */
-		status = "disabled";
-	};
-
-	reg_panel_vcc: regulator-panel-vcc {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_panel_vcc_reg>;
-		regulator-name = "PANEL_VCC";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 6 0>;
-		enable-active-high;
-		/* Disabled by default, unless display board plugged in. */
-		status = "disabled";
-	};
-
-	reg_usdhc2_vcc: regulator-usdhc2-vcc {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usdhc2_vcc_reg>;
-		regulator-name = "V_3V3_SD";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 19 0>;
-		enable-active-high;
-	};
-
-	watchdog-gpio {
-		/* TPS3813 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_watchdog_gpio>;
-		compatible = "linux,wdt-gpio";
-		always-enabled;
-		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		hw_algo = "level";
-		/* Reset triggers in 2..3 seconds */
-		hw_margin_ms = <1500>;
-		/* Disabled by default */
-		status = "disabled";
-	};
-};
-
-&A53_0 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&A53_1 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&A53_2 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&A53_3 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&ddrc {
-	operating-points-v2 = <&ddrc_opp_table>;
-
-	ddrc_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp-25M {
-			opp-hz = /bits/ 64 <25000000>;
-		};
-
-		opp-100M {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-
-		opp-750M {
-			opp-hz = /bits/ 64 <750000000>;
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash@0 {	/* W25Q128FVSI */
-		compatible = "jedec,spi-nor";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-&ecspi2 {	/* Feature connector SPI */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
-	/* Disabled by default, unless feature board plugged in. */
-	status = "disabled";
-};
-
-&ecspi3 {	/* Display connector SPI */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
-	/* Disabled by default, unless display board plugged in. */
-	status = "disabled";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&fec1_phy>;
-	phy-supply = <&buck4_reg>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Atheros AR8031 PHY */
-		fec1_phy: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			/*
-			 * Dedicated ENET_WOL# signal is unused, the PHY
-			 * can wake the SoC up via INT signal as well.
-			 */
-			interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <10000>;
-			qca,clk-out-frequency = <125000000>;
-			qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
-			qca,keep-pll-enabled;
-			vddio-supply = <&vddio>;
-
-			vddio: vddio-regulator {
-				regulator-name = "VDDIO";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vddh: vddh-regulator {
-				regulator-name = "VDDH";
-			};
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "ENET_RST#", "WDOG_B#", "PMIC_INT#",
-		"", "M2-B_PCIE_RST#", "M2-B_PCIE_WAKE#", "RTC_IRQ#",
-		"WDOG_KICK#", "M2-B_PCIE_CLKREQ#",
-		"USB1_OTG_ID_3V3", "ENET_WOL#",
-		"", "", "", "ENET_INT#",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"MEMCFG2", "MEMCFG1", "DSI_RESET_1V8#", "DSI_IRQ_1V8#",
-		"M2-B_FULL_CARD_PWROFF_1V8#", "EEPROM_WP_1V8#",
-		"PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", "GRAPHICS_PRSNT_1V8#",
-		"MEMCFG0", "WDOG_EN",
-		"M2-B_W_DISABLE1_WWAN_1V8#", "M2-B_W_DISABLE2_GPS_1V8#",
-		"", "", "", "",
-		"", "", "", "SD2_RESET#", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
-		"", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
-		"CSI_PD_1V8", "CSI_RESET_1V8#", "", "",
-		"", "", "", "",
-		"", "", "", "M2-B_WAKE_WWAN_1V8#",
-		"M2-B_RESET_1V8#", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"NC0", "NC1", "BOOTCFG0", "BOOTCFG1",
-		"BOOTCFG2", "BOOTCFG3", "BOOTCFG4", "BOOTCFG5",
-		"BOOTCFG6", "BOOTCFG7", "NC10", "NC11",
-		"BOOTCFG8", "BOOTCFG9", "BOOTCFG10", "BOOTCFG11",
-		"BOOTCFG12", "BOOTCFG13", "BOOTCFG14", "BOOTCFG15",
-		"NC20", "", "", "",
-		"", "CAN_INT#", "CAN_RST#", "GPIO4_IO27",
-		"DIS_USB_DN2", "", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "DIS_USB_DN1", "USBHUB_RESET#", "GPIO5_IO03",
-		"GPIO5_IO04", "", "", "",
-		"", "SPI1_CS#", "", "",
-		"", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
-		"I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
-		"I2C4_SCL_3V3", "I2C4_SDA_3V3", "", "",
-		"", "SPI3_CS#", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	pmic: pmic@4b {
-		compatible = "rohm,bd71847";
-		reg = <0x4b>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		rohm,reset-snvs-powered;
-
-		/*
-		 * i.MX 8M Mini Data Sheet for Consumer Products
-		 * 3.1.3 Operating ranges
-		 * MIMX8MM4DVTLZAA
-		 */
-		regulators {
-			/* VDD_SOC */
-			buck1_reg: BUCK1 {
-				regulator-name = "buck1";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-			};
-
-			/* VDD_ARM */
-			buck2_reg: BUCK2 {
-				regulator-name = "buck2";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1050000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <1000000>;
-				rohm,dvs-idle-voltage = <950000>;
-			};
-
-			/* VDD_DRAM, BUCK5 */
-			buck3_reg: BUCK3 {
-				regulator-name = "buck3";
-				/* 1.5 GHz DDR bus clock */
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* 3V3_VDD, BUCK6 */
-			buck4_reg: BUCK4 {
-				regulator-name = "buck4";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* 1V8_VDD, BUCK7 */
-			buck5_reg: BUCK5 {
-				regulator-name = "buck5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* 1V1_NVCC_DRAM, BUCK8 */
-			buck6_reg: BUCK6 {
-				regulator-name = "buck6";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* 1V8_NVCC_SNVS */
-			ldo1_reg: LDO1 {
-				regulator-name = "ldo1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* 0V8_VDD_SNVS */
-			ldo2_reg: LDO2 {
-				regulator-name = "ldo2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* 1V8_VDDA */
-			ldo3_reg: LDO3 {
-				regulator-name = "ldo3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* 0V9_VDD_PHY */
-			ldo4_reg: LDO4 {
-				regulator-name = "ldo4";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* 1V2_VDD_PHY */
-			ldo6_reg: LDO6 {
-				regulator-name = "ldo6";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	usb-hub@2c {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_hub>;
-		compatible = "microchip,usb2514bi";
-		reg = <0x2c>;
-		individual-port-switching;
-		reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-		self-powered;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	rtc: rtc@68 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
-		compatible = "st,m41t62";
-		reg = <0x68>;
-		interrupts-extended = <&gpio1 7 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	pcieclk: clk@6a {
-		compatible = "renesas,9fgv0241";
-		reg = <0x6a>;
-		clocks = <&clk_xtal25>;
-		#clock-cells = <1>;
-	};
-};
-
-&i2c3 {	/* Display connector I2C */
-	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
-	clock-frequency = <320000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c4 {	/* Feature connector I2C */
-	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
-	clock-frequency = <320000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	pinctrl-1 = <&pinctrl_i2c4_gpio>;
-	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
-		    <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
-		    <&pinctrl_panel_expansion>;
-
-	pinctrl_ecspi1: ecspi1-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x44
-			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x44
-			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x44
-			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x44
-			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x44
-			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x44
-			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x40
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x44
-			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x44
-			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x44
-			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x40
-		>;
-	};
-
-	pinctrl_fec1: fec1-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
-			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
-			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
-			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
-			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
-			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
-			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
-			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
-			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
-			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
-			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
-			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			/* ENET_RST# */
-			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x6
-			/* ENET_WOL# */
-			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x40000090
-			/* ENET_INT# */
-			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x40000090
-		>;
-	};
-
-	pinctrl_hog_feature: hog-feature-grp {
-		fsl,pins = <
-			/* GPIO4_IO27 */
-			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x40000006
-			/* GPIO5_IO03 */
-			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3			0x40000006
-			/* GPIO5_IO04 */
-			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4			0x40000006
-
-			/* CAN_INT# */
-			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x40000090
-			/* CAN_RST# */
-			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26		0x26
-		>;
-	};
-
-	pinctrl_hog_panel: hog-panel-grp {
-		fsl,pins = <
-			/* GRAPHICS_GPIO0_1V8 */
-			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7		0x26
-		>;
-	};
-
-	pinctrl_hog_misc: hog-misc-grp {
-		fsl,pins = <
-			/* PG_V_IN_VAR# */
-			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x40000000
-			/* CSI_PD_1V8 */
-			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8		0x0
-			/* CSI_RESET_1V8# */
-			MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9		0x0
-
-			/* DIS_USB_DN1 */
-			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x0
-			/* DIS_USB_DN2 */
-			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x0
-
-			/* EEPROM_WP_1V8# */
-			MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5		0x100
-			/* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
-			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6		0x0
-			/* GRAPHICS_PRSNT_1V8# */
-			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7		0x40000000
-
-			/* CLK_CCM_CLKO1_3V3 */
-			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x10
-		>;
-	};
-
-	pinctrl_hog_sbc: hog-sbc-grp {
-		fsl,pins = <
-			/* MEMCFG[0..2] straps */
-			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8		0x40000140
-			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1			0x40000140
-			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0			0x40000140
-
-			/* BOOT_CFG[0..15] straps */
-			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2		0x40000000
-			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3		0x40000000
-			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x40000000
-			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x40000000
-			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x40000000
-			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x40000000
-			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x40000000
-			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x40000000
-			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12		0x40000000
-			MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13		0x40000000
-			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x40000000
-			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x40000000
-			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x40000000
-			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x40000000
-			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x40000000
-			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x40000000
-
-			/* Not connected pins */
-			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20		0x0
-			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10		0x0
-			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11		0x0
-			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x0
-			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1			0x0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000084
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000084
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1-gpio-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x84
-			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x84
-		>;
-	};
-
-	pinctrl_i2c2: i2c2-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000084
-			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000084
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2-gpio-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x84
-			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x84
-		>;
-	};
-
-	pinctrl_i2c3: i2c3-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000084
-			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000084
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3-gpio-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x84
-			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x84
-		>;
-	};
-
-	pinctrl_i2c4: i2c4-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000084
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000084
-		>;
-	};
-
-	pinctrl_i2c4_gpio: i2c4-gpio-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20		0x84
-			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21		0x84
-		>;
-	};
-
-	pinctrl_panel_backlight: panel-backlight-grp {
-		fsl,pins = <
-			/* BL_ENABLE_1V8 */
-			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x104
-		>;
-	};
-
-	pinctrl_panel_expansion: panel-expansion-grp {
-		fsl,pins = <
-			/* DSI_RESET_1V8# */
-			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2		0x2
-			/* DSI_IRQ_1V8# */
-			MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3		0x40000090
-		>;
-	};
-
-	pinctrl_panel_vcc_reg: panel-vcc-grp {
-		fsl,pins = <
-			/* TFT_ENABLE_1V8 */
-			MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6		0x104
-		>;
-	};
-
-	pinctrl_panel_pwm: panel-pwm-grp {
-		fsl,pins = <
-			/* BL_PWM_3V3 */
-			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT		0x12
-		>;
-	};
-
-	pinctrl_pcie0: pcie-grp {
-		fsl,pins = <
-			/* M2-B_RESET_1V8# */
-			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x102
-			/* M2-B_PCIE_RST# */
-			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x2
-			/* M2-B_FULL_CARD_PWROFF_1V8# */
-			MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4		0x102
-			/* M2-B_W_DISABLE1_WWAN_1V8# */
-			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10		0x102
-			/* M2-B_W_DISABLE2_GPS_1V8# */
-			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11		0x102
-			/* CLK_M2_32K768 */
-			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x14
-			/* M2-B_WAKE_WWAN_1V8# */
-			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x40000140
-			/* M2-B_PCIE_WAKE# */
-			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x40000140
-			/* M2-B_PCIE_CLKREQ# */
-			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x40000140
-		>;
-	};
-
-	pinctrl_pmic: pmic-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x40000090
-		>;
-	};
-
-	pinctrl_rtc: rtc-grp {
-		fsl,pins = <
-			/* RTC_IRQ# */
-			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x40000090
-		>;
-	};
-
-	pinctrl_sai5: sai5-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK		0x100
-			MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0		0x0
-			MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC		0x100
-			MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK		0x100
-			MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0		0x100
-		>;
-	};
-
-	pinctrl_uart1: uart1-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x90
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x90
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x50
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x50
-		>;
-	};
-
-	pinctrl_uart2: uart2-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x50
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x90
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x50
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x90
-		>;
-	};
-
-	pinctrl_uart3: uart3-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x40
-			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x40
-		>;
-	};
-
-	pinctrl_uart4: uart4-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x40
-			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x40
-		>;
-	};
-
-	pinctrl_usb_hub: usb-hub-grp {
-		fsl,pins = <
-			/* USBHUB_RESET# */
-			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x4
-		>;
-	};
-
-	pinctrl_usb_otg1: usb-otg1-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x40000000
-			MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR		0x4
-			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x40000090
-		>;
-	};
-
-	pinctrl_usdhc2_vcc_reg: usdhc2-vcc-reg-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x4
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6
-			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B		0x0d6
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6
-			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B		0x0d6
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6
-			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B		0x0d6
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
-			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
-			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
-			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
-			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
-			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
-			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
-			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
-			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
-			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
-			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
-			MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B		0x40
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
-			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
-			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
-			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
-			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
-			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
-			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
-			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
-			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
-			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
-			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
-			MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B		0x40
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
-			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
-			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
-			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
-			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
-			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
-			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
-			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
-			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
-			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
-			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
-			MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B		0x40
-		>;
-	};
-
-	pinctrl_watchdog_gpio: watchdog-gpio-grp {
-		fsl,pins = <
-			/* WDOG_B# */
-			MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2		0x26
-			/* WDOG_EN -- ungate WDT RESET# signal propagation */
-			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9		0x6
-			/* WDOG_KICK# / WDI */
-			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x26
-		>;
-	};
-};
-
-&pcie_phy {
-	fsl,clkreq-unsupported;	/* CLKREQ_B is not connected to suitable input */
-	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
-	fsl,tx-deemph-gen1 = <0x2d>;
-	fsl,tx-deemph-gen2 = <0xf>;
-	clocks = <&pcieclk 0>;
-	status = "okay";
-};
-
-&pcie0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie0>;
-	reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&pcieclk 0>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
-	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
-			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
-	assigned-clock-rates = <10000000>, <250000000>;
-	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
-				 <&clk IMX8MM_SYS_PLL2_250M>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_panel_pwm>;
-	/* Disabled by default, unless display board plugged in. */
-	status = "disabled";
-};
-
-&sai5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai5>;
-	fsl,sai-mclk-direction-output;
-	/* Input into codec PLL */
-	assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
-	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>;
-	assigned-clock-rates = <22579200>;
-	/* Disabled by default, unless display board plugged in. */
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "disabled";
-};
-
-&uart3 {	/* A53 Debug */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {	/* M4 Debug */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	/* UART4 is reserved for CM and RDC blocks CA access to UART4. */
-	status = "disabled";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1>;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbotg2 {
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 {	/* MicroSD */
-	assigned-clocks = <&clk IMX8MM_CLK_USDHC2_ROOT>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_usdhc2_vcc>;
-	status = "okay";
-};
-
-&usdhc3 {	/* eMMC */
-	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
-	assigned-clock-rates = <400000000>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&buck4_reg>;
-	vqmmc-supply = <&buck5_reg>;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "okay";
-};
diff --git a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi
index 1e82e718b8f..a4d5ed1649f 100644
--- a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi
@@ -8,7 +8,7 @@
 
 / {
 	aliases {
-		eeprom0 = &eeprom;
+		eeprom0 = &eeprom902;
 		mmc0 = &usdhc3;	/* eMMC */
 		mmc1 = &usdhc2;	/* MicroSD */
 		spi0 = &ecspi1;
diff --git a/arch/arm/dts/imx8mp-data-modul-edm-sbc.dts b/arch/arm/dts/imx8mp-data-modul-edm-sbc.dts
deleted file mode 100644
index 904c610b6de..00000000000
--- a/arch/arm/dts/imx8mp-data-modul-edm-sbc.dts
+++ /dev/null
@@ -1,972 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2022 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/net/qca-ar803x.h>
-#include "imx8mp.dtsi"
-
-/ {
-	model = "Data Modul i.MX8M Plus eDM SBC";
-	compatible = "dmo,imx8mp-data-modul-edm-sbc", "fsl,imx8mp";
-
-	aliases {
-		rtc0 = &rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		/* There are 1/2/4 GiB options, adjusted by bootloader. */
-		reg = <0x0 0x40000000 0 0x40000000>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_panel_backlight>;
-		brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm1 0 5000000 0>;
-		/* Disabled by default, unless display board plugged in. */
-		status = "disabled";
-	};
-
-	clk_xtal25: clk-xtal25 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	panel: panel {
-		backlight = <&backlight>;
-		power-supply = <&reg_panel_vcc>;
-		/* Disabled by default, unless display board plugged in. */
-		status = "disabled";
-	};
-
-	reg_panel_vcc: regulator-panel-vcc {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_panel_vcc_reg>;
-		regulator-name = "PANEL_VCC";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 6 0>;
-		enable-active-high;
-		/* Disabled by default, unless display board plugged in. */
-		status = "disabled";
-	};
-
-	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 19 0>; /* SD2_RESET */
-		off-on-delay-us = <12000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "VDD_3V3_SD";
-		startup-delay-us = <100>;
-		vin-supply = <&buck4>;
-	};
-
-	watchdog {
-		/* TPS3813 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_watchdog_gpio>;
-		compatible = "linux,wdt-gpio";
-		always-running;
-		gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
-		hw_algo = "level";
-		/* Reset triggers in 2..3 seconds */
-		hw_margin_ms = <1500>;
-		/* Disabled by default */
-		status = "disabled";
-	};
-};
-
-&A53_0 {
-	cpu-supply = <&buck2>;
-};
-
-&A53_1 {
-	cpu-supply = <&buck2>;
-};
-
-&A53_2 {
-	cpu-supply = <&buck2>;
-};
-
-&A53_3 {
-	cpu-supply = <&buck2>;
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash@0 {	/* W25Q128JVEI */
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <100000000>;	/* Up to 133 MHz */
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <1>;
-	};
-};
-
-&ecspi2 {	/* Feature connector SPI */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
-	/* Disabled by default, unless feature board plugged in. */
-	status = "disabled";
-};
-
-&ecspi3 {	/* Display connector SPI */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
-	/* Disabled by default, unless display board plugged in. */
-	status = "disabled";
-};
-
-&eqos {	/* First ethernet */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_eqos>;
-	phy-handle = <&phy_eqos>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Atheros AR8031 PHY */
-		phy_eqos: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			/*
-			 * Dedicated ENET_WOL# signal is unused, the PHY
-			 * can wake the SoC up via INT signal as well.
-			 */
-			interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <10000>;
-			qca,keep-pll-enabled;
-			vddio-supply = <&vddio_eqos>;
-
-			vddio_eqos: vddio-regulator {
-				regulator-name = "VDDIO_EQOS";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vddh_eqos: vddh-regulator {
-				regulator-name = "VDDH_EQOS";
-			};
-		};
-	};
-};
-
-&fec {	/* Second ethernet */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-handle = <&phy_fec>;
-	phy-mode = "rgmii-id";
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Atheros AR8031 PHY */
-		phy_fec: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			/*
-			 * Dedicated ENET_WOL# signal is unused, the PHY
-			 * can wake the SoC up via INT signal as well.
-			 */
-			interrupts-extended = <&gpio2 2 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <10000>;
-			qca,keep-pll-enabled;
-			vddio-supply = <&vddio_fec>;
-
-			vddio_fec: vddio-regulator {
-				regulator-name = "VDDIO_FEC";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vddh_fec: vddh-regulator {
-				regulator-name = "VDDH_FEC";
-			};
-		};
-	};
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "USBHUB_RESET#", "WDOG_B#", "PMIC_INT#",
-		"", "M2_PCIE_RST#", "M2_PCIE_WAKE#", "GPIO5_IO03",
-		"GPIO5_IO04", "PDM_SEL", "ENET_WOL#", "ENET_INT#",
-		"", "", "", "ENET_RST#",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "ENET2_INT#", "", "", "", "", "",
-		"WDOG_KICK#", "ENET2_RST#", "CAN_INT#", "RTC_IRQ#",
-		"", "", "", "",
-		"", "", "", "SD2_RESET#", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
-		"", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
-		"CSI2_PD_1V8", "CSI2_RESET_1V8#", "", "",
-		"", "", "EEPROM_WP_1V8#", "", "", "", "", "",
-		"MEMCFG0", "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#",
-		"", "M2_W_DISABLE1_1V8#",
-		"M2_W_DISABLE2_1V8#", "", "I2C5_SCL_3V3", "I2C5_SDA_3V3",
-		"", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"DSI_RESET_1V8#", "MEMCFG2", "", "MEMCFG1", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "GRAPHICS_PRSNT_1V8#", "DSI_IRQ_1V8#",
-		"", "DIS_USB_DN1", "DIS_USB_DN2", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "WDOG_EN", "", "",
-		"", "SPI1_CS#", "", "",
-		"", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
-		"I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
-		"", "", "", "",
-		"", "SPI3_CS#", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	usb-hub@2c {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_hub>;
-		compatible = "microchip,usb2514bi";
-		reg = <0x2c>;
-		individual-port-switching;
-		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-		self-powered;
-	};
-
-	eeprom: eeprom@51 {
-		compatible = "atmel,24c32";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-
-	rtc: rtc@68 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
-		compatible = "st,m41t62";
-		reg = <0x68>;
-		interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	pcieclk: clk@6a {
-		compatible = "renesas,9fgv0241";
-		reg = <0x6a>;
-		clocks = <&clk_xtal25>;
-		#clock-cells = <1>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	pmic: pmic@25 {
-		compatible = "nxp,pca9450c";
-		reg = <0x25>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
-		/*
-		 * i.MX 8M Plus Data Sheet for Consumer Products
-		 * 3.1.4 Operating ranges
-		 * MIMX8ML8CVNKZAB
-		 */
-		regulators {
-			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-ramp-delay = <3125>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2: BUCK2 {	/* VDD_ARM */
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-ramp-delay = <3125>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4: BUCK4 {	/* VDD_3V3 */
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5: BUCK5 {	/* VDD_1V8 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6: BUCK6 {	/* NVCC_DRAM_1V1 */
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo3: LDO3 {	/* VDDA_1V8 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo4: LDO4 {	/* PMIC_LDO4 */
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo5: LDO5 {	/* NVCC_SD2 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-		};
-	};
-};
-
-&i2c5 {	/* HDMI EDID bus */
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c5>;
-	pinctrl-1 = <&pinctrl_i2c5_gpio>;
-	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
-		    <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
-		    <&pinctrl_panel_expansion>;
-
-	pinctrl_ecspi1: ecspi1-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x44
-			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x44
-			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x44
-			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x44
-			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x44
-			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x44
-			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK		0x44
-			MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI		0x44
-			MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO		0x44
-			MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x40
-		>;
-	};
-
-	pinctrl_eqos: eqos-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
-			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
-			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
-			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
-			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
-			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
-			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
-			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
-			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
-			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
-			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
-			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
-			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
-			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
-			/* ENET_RST# */
-			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x6
-			/* ENET_INT# */
-			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x40000090
-		>;
-	};
-
-	pinctrl_fec: fec-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
-			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
-			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
-			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
-			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
-			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
-			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
-			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
-			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
-			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
-			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
-			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
-			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
-			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
-			/* ENET2_RST# */
-			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x6
-			/* ENET2_INT# */
-			MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x40000090
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
-			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
-		>;
-	};
-
-	pinctrl_hog_feature: hog-feature-grp {
-		fsl,pins = <
-			/* GPIO5_IO03 */
-			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x40000006
-			/* GPIO5_IO04 */
-			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x40000006
-
-			/* CAN_INT# */
-			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x40000090
-		>;
-	};
-
-	pinctrl_hog_panel: hog-panel-grp {
-		fsl,pins = <
-			/* GRAPHICS_GPIO0_1V8 */
-			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x26
-		>;
-	};
-
-	pinctrl_hog_misc: hog-misc-grp {
-		fsl,pins = <
-			/* ENET_WOL# -- shared by both PHYs */
-			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x40000090
-
-			/* PG_V_IN_VAR# */
-			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01		0x40000000
-			/* CSI2_PD_1V8 */
-			MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08		0x0
-			/* CSI2_RESET_1V8# */
-			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09		0x0
-
-			/* DIS_USB_DN1 */
-			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x0
-			/* DIS_USB_DN2 */
-			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x0
-
-			/* EEPROM_WP_1V8# */
-			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x100
-			/* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
-			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x0
-			/* GRAPHICS_PRSNT_1V8# */
-			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x40000000
-
-			/* CLK_CCM_CLKO1_3V3 */
-			MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1		0x10
-		>;
-	};
-
-	pinctrl_hog_sbc: hog-sbc-grp {
-		fsl,pins = <
-			/* MEMCFG[0..2] straps */
-			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x40000140
-			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x40000140
-			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x40000140
-		>;
-	};
-
-	pinctrl_i2c1: i2c1-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x40000084
-			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x40000084
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1-gpio-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x84
-			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x84
-		>;
-	};
-
-	pinctrl_i2c2: i2c2-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x40000084
-			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x40000084
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2-gpio-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x84
-			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x84
-		>;
-	};
-
-	pinctrl_i2c3: i2c3-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x40000084
-			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x40000084
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3-gpio-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x84
-			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x84
-		>;
-	};
-
-	pinctrl_i2c5: i2c5-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x40000084
-			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x40000084
-		>;
-	};
-
-	pinctrl_i2c5_gpio: i2c5-gpio-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x84
-			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x84
-		>;
-	};
-
-	pinctrl_panel_backlight: panel-backlight-grp {
-		fsl,pins = <
-			/* BL_ENABLE_1V8 */
-			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00		0x104
-		>;
-	};
-
-	pinctrl_panel_expansion: panel-expansion-grp {
-		fsl,pins = <
-			/* DSI_RESET_1V8# */
-			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x2
-			/* DSI_IRQ_1V8# */
-			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x40000090
-		>;
-	};
-
-	pinctrl_panel_pwm: panel-pwm-grp {
-		fsl,pins = <
-			/* BL_PWM_3V3 */
-			MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT			0x12
-		>;
-	};
-
-	pinctrl_panel_vcc_reg: panel-vcc-grp {
-		fsl,pins = <
-			/* TFT_ENABLE_1V8 */
-			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06		0x104
-		>;
-	};
-
-	pinctrl_pcie0: pcie-grp {
-		fsl,pins = <
-			/* M2_PCIE_RST# */
-			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x2
-			/* M2_W_DISABLE1_1V8# */
-			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23		0x2
-			/* M2_W_DISABLE2_1V8# */
-			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24		0x2
-			/* CLK_M2_32K768 */
-			MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1		0x14
-			/* M2_PCIE_WAKE# */
-			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40000140
-			/* M2_PCIE_CLKREQ# */
-			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B		0x61
-		>;
-	};
-
-	pinctrl_pdm: pdm-grp {
-		fsl,pins = <
-			/* PDM_SEL */
-			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x0
-			MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK		0x0
-			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00	0x0
-		>;
-	};
-
-	pinctrl_pmic: pmic-grp {
-		fsl,pins = <
-			/* PMIC_nINT */
-			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40000090
-		>;
-	};
-
-	pinctrl_rtc: rtc-grp {
-		fsl,pins = <
-			/* RTC_IRQ# */
-			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x40000090
-		>;
-	};
-
-	pinctrl_sai1: sai1-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC	0xd6
-			MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00	0xd6
-			MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK	0xd6
-			MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK	0xd6
-			MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00	0xd6
-		>;
-	};
-
-	pinctrl_sai2: sai2-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
-			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
-			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
-			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK	0xd6
-		>;
-	};
-
-	pinctrl_sai3: sai3-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
-			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
-			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
-			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
-			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
-		>;
-	};
-
-	pinctrl_uart1: uart1-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x49
-			MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX		0x49
-			MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS		0x49
-			MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS		0x49
-		>;
-	};
-
-	pinctrl_uart2: uart2-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX		0x49
-			MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX		0x49
-			MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS		0x49
-			MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS		0x49
-		>;
-	};
-
-	pinctrl_uart3: uart3-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49
-			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49
-		>;
-	};
-
-	pinctrl_uart4: uart4-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49
-			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
-			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
-			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
-			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
-			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
-			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
-			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
-			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
-			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
-			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
-			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
-			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
-			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
-			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
-			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
-			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
-		>;
-	};
-
-	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x20
-		>;
-	};
-
-	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x40000080
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
-			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
-			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
-			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
-			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
-			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
-			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
-			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
-			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
-			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
-			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
-			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
-			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
-			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
-			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
-			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
-			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
-			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
-			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
-			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
-			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
-			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
-			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
-			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
-			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
-			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
-			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
-			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
-			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
-			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
-			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
-			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
-			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
-			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
-		>;
-	};
-
-	pinctrl_usb_hub: usb-hub-grp {
-		fsl,pins = <
-			/* USBHUB_RESET# */
-			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x4
-		>;
-	};
-
-	pinctrl_usb1: usb1-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR		0x6
-			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x80
-		>;
-	};
-
-	pinctrl_watchdog_gpio: watchdog-gpio-grp {
-		fsl,pins = <
-			/* WDOG_B# */
-			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0x26
-			/* WDOG_EN -- ungate WDT RESET# signal propagation */
-			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x6
-			/* WDOG_KICK# / WDI */
-			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x26
-		>;
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_panel_pwm>;
-	/* Disabled by default, unless display board plugged in. */
-	status = "disabled";
-};
-
-/* SD slot */
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_usdhc2_vmmc>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	vmmc-supply = <&buck4>;
-	vqmmc-supply = <&buck5>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&uart1 {	/* RS485 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "disabled";	/* Optional */
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {	/* A53 Debug */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usb3_phy0 {
-	status = "okay";
-};
-
-&usb3_0 {
-	fsl,over-current-active-low;
-	status = "okay";
-};
-
-&usb_dwc3_0 {	/* Lower plug direct */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb1>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb3_phy1 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&usb_dwc3_1 {	/* Upper plug via HUB */
-	dr_mode = "host";
-	status = "okay";
-};
-
-&wdog1 {
-	status = "okay";
-};
diff --git a/configs/imx8m_data_modul.config b/configs/imx8m_data_modul.config
index 92940ddb947..468a3a77824 100644
--- a/configs/imx8m_data_modul.config
+++ b/configs/imx8m_data_modul.config
@@ -141,6 +141,7 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_OF_CONTROL=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_OF_UPSTREAM=y
 CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_PHY_ANEG_TIMEOUT=20000
 CONFIG_PHY_ATHEROS=y
diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig
index 47f0d3cc050..70dad87f3ff 100644
--- a/configs/imx8mm_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mm_data_modul_edm_sbc_defconfig
@@ -6,7 +6,7 @@ CONFIG_TARGET_IMX8MM_DATA_MODUL_EDM_SBC=y
 CONFIG_CI_UDC=y
 CONFIG_CLK_IMX8MM=y
 CONFIG_CMD_PCI=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mm-data-modul-edm-sbc"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-data-modul-edm-sbc"
 CONFIG_DEFAULT_FDT_FILE="imx8mm-data-modul-edm-sbc.dtb"
 CONFIG_DM_PMIC_BD71837=y
 CONFIG_DM_REGULATOR_BD71837=y
diff --git a/configs/imx8mp_data_modul_edm_sbc_defconfig b/configs/imx8mp_data_modul_edm_sbc_defconfig
index a30aaa57109..129bed9c2ff 100644
--- a/configs/imx8mp_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mp_data_modul_edm_sbc_defconfig
@@ -4,7 +4,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_IMX8M=y
 CONFIG_TARGET_IMX8MP_DATA_MODUL_EDM_SBC=y
 CONFIG_CLK_IMX8MP=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mp-data-modul-edm-sbc"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-data-modul-edm-sbc"
 CONFIG_DEFAULT_FDT_FILE="imx8mp-data-modul-edm-sbc.dtb"
 CONFIG_DM_PMIC_PCA9450=y
 CONFIG_DM_REGULATOR_PCA9450=y
-- 
2.53.0