[PATCH v7 8/8] PCI: vmd: Add workaround for bus number hardwired to fixed non-zero value

[Szymon Durawa <szymon.durawa@linux.intel.com>]

The VMD BUS1 root bus number is fixed in hardware to 0x80. It marks bridge
invalid configuration when detecting a non-zero (0x80) the VMD BUS1 root
bus number.
Thus root bus number is deconfigured in the first pass of pci_scan_bridge()
to be re-assigned to 0x0 in the second pass. As a result no subordinate bus
number behind VMD BUS1 is found.

To avoid bus number reconfiguration, BUS1 number has to be the same
as BUS1 primary number.

Log snippet without workaround:

[    3.752507] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e1
[    3.752510] pci_bus 10000:e1: busn_res: can not insert [bus e1-ff] under domain [bus 00-ff] (conflicts with (null) [bus e0-f0])
[    3.752515] pci_bus 10000:e1: root bus resource [bus f1-ff]
[    3.752517] pci_bus 10000:e1: root bus resource [mem 0x8c800000-0x8cffffff]
[    3.752519] pci_bus 10000:e1: root bus resource [mem 0x701b802000-0x701bffffff 64bit]
[    3.752523] pci_bus 10000:e1: scanning bus
[    3.752732] pci (null): Looking for ACPI companion (address 0x80e0ffff)
[    3.752745] pci 10000:e1:1c.0: [8086:7f38] type 01 class 0x060400 PCIe Root Port
[    3.752779] pci 10000:e1:1c.0: PCI bridge to [bus f1]
[    3.752861] pci 10000:e1:1c.0: PME# supported from D0 D3hot D3cold
[    3.752864] pci 10000:e1:1c.0: PME# disabled
[    3.752909] pci 10000:e1:1c.0: PTM enabled (root), 4ns granularity
[    3.752981] pci 10000:e1:1c.0: vgaarb: pci_notify
[    3.752987] pci_bus 10000:e1: fixups for bus
[    3.752992] pci 10000:e1:1c.0: scanning [bus f1-f1] behind bridge, pass 0
[    3.752993] pci 10000:e1:1c.0: primary 80, bus->number e1.
[    3.752994] pci 10000:e1:1c.0: bridge configuration invalid ([bus f1-f1]), reconfiguring
[    3.753003] pci 10000:e1:1c.0: scanning [bus 00-00] behind bridge, pass 1
[    3.753004] pci 10000:e1:1c.0: primary 00, bus->number e1.

Suggested-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Szymon Durawa <szymon.durawa@linux.intel.com>
---
 drivers/pci/controller/vmd.c | 66 ++++++++++++++++++++++++++++++++----
 1 file changed, 60 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index 7e76ef3d7ec8..f4c6a16e8473 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -467,10 +467,23 @@ static unsigned int vmd_bus_to_ecam(struct vmd_dev *vmd, unsigned int busnr)
 static void __iomem *vmd_cfg_addr(struct vmd_dev *vmd, struct pci_bus *bus,
 				  unsigned int devfn, int reg, int len)
 {
+	unsigned char bus_number;
 	unsigned int busnr_ecam;
 	u32 offset;
 
-	busnr_ecam = vmd_bus_to_ecam(vmd, bus->number);
+	/*
+	 * Remap ONLY the virtual BUS1 root bus number (0x80) to its physical
+	 * CFGBAR start aperture (0xE1). Downstream subordinate buses behind
+	 * the root port are assigned physical numbers (0xF1..0xFF per
+	 * VMD_BUSRANGE1) and must NOT be remapped, otherwise child endpoint
+	 * accesses would target the root port rather than their own ECAM space.
+	 */
+	if (vmd->bus1_rootbus && bus->number == VMD_PRIMARY_BUS1)
+		bus_number = vmd->busn_start[VMD_BUS_1];
+	else
+		bus_number = bus->number;
+
+	busnr_ecam = vmd_bus_to_ecam(vmd, bus_number);
 	offset = PCIE_ECAM_OFFSET(busnr_ecam, devfn, reg);
 
 	if (offset + len >= resource_size(&vmd->dev->resource[VMD_CFGBAR]))
@@ -550,18 +563,39 @@ static struct pci_ops vmd_ops = {
 static struct acpi_device *vmd_acpi_find_companion(struct pci_dev *pci_dev)
 {
 	struct pci_host_bridge *bridge;
-	u32 busnr, addr;
+	struct vmd_dev *vmd;
+	u32 addr;
+	int busnr;
+	u8 pci_bus_number;
+	u8 bridge_bus_number;
 
 	if (pci_dev->bus->ops != &vmd_ops)
 		return NULL;
 
+	vmd = vmd_from_bus(pci_dev->bus);
 	bridge = pci_find_host_bridge(pci_dev->bus);
-	busnr = pci_dev->bus->number - bridge->bus->number;
+	pci_bus_number = pci_dev->bus->number;
+	bridge_bus_number = bridge->bus->number;
+
+	/*
+	 * BUS1 is registered with logical root number 0x80. For ACPI companion
+	 * matching, map only the logical root bus (0x80) to the physical
+	 * BUS1 start base (0xE1). Downstream child buses (0xF1..0xFF) already
+	 * reflect their physical bus numbers and must remain untranslated to
+	 * produce the correct relative depth against bridge_bus_number.
+	 */
+	if (vmd->bus1_rootbus && bridge->bus == vmd->bus[VMD_BUS_1]) {
+		bridge_bus_number = vmd->busn_start[VMD_BUS_1];
+		if (pci_bus_number == VMD_PRIMARY_BUS1)
+			pci_bus_number = vmd->busn_start[VMD_BUS_1];
+	}
+
+	busnr = pci_bus_number - bridge_bus_number;
 	/*
 	 * The address computation below is only applicable to relative bus
 	 * numbers below 32.
 	 */
-	if (busnr > 31)
+	if (busnr < 0 || busnr > 31)
 		return NULL;
 
 	addr = (busnr << 24) | ((u32)pci_dev->devfn << 16) | 0x8000FFFFU;
@@ -1186,6 +1220,7 @@ static int vmd_create_bus(struct vmd_dev *vmd, enum vmd_rootbus bus_number,
 			  struct pci_sysdata *sd, resource_size_t *offset,
 			  u8 primary)
 {
+	u8 root_busnr;
 	u8 cfgbar = bus_number * 3;
 	u8 membar1 = cfgbar + 1;
 	u8 membar2 = cfgbar + 2;
@@ -1198,8 +1233,27 @@ static int vmd_create_bus(struct vmd_dev *vmd, enum vmd_rootbus bus_number,
 	pci_add_resource_offset(&resources, &vmd->resources[membar2],
 				offset[1]);
 
-	vmd_bus = pci_create_root_bus(&vmd->dev->dev,
-				      vmd->busn_start[bus_number], &vmd_ops, sd,
+	/*
+	 * Register BUS1 with its logical root number (0x80) up front so PCI core
+	 * bridge scanning does not see a post-registration bus-number mutation.
+	 *
+	 * This is a workaround for pci_scan_bridge_extend() code.
+	 * It marks bridge invalid configuration when detecting a
+	 * non-zero (0x80) the VMD BUS1 root bus number. Thus Primary Bus Number
+	 * of Root Ports on BUS1 is deconfigured in the first pass of
+	 * pci_scan_bridge() to be re-assigned to 0x0 in the second pass.
+	 * As a result no subordinate bus number behind VMD BUS1 is found.
+	 * Workaround: VMD_BUS_1 bus number shall be set to VMD_PRIMARY_BUS1 so it has
+	 * the same value as vmd->bus[VMD_BUS_1]->primary, it will bypass bus number
+	 * reconfiguration.
+	 */
+
+	if (bus_number == VMD_BUS_1 && vmd->bus1_rootbus)
+		root_busnr = VMD_PRIMARY_BUS1;
+	else
+		root_busnr = vmd->busn_start[bus_number];
+
+	vmd_bus = pci_create_root_bus(&vmd->dev->dev, root_busnr, &vmd_ops, sd,
 				      &resources);
 
 	if (!vmd_bus) {
-- 
2.43.0