[PATCH 0/3] Add USB DWC3 support for Samsung Exynos8855

[Selvarasu Ganesan <selvarasu.g@samsung.com>]

The Samsung Exynos8855 SoC implements a Synopsys DesignWare USB3 DRD
controller. The DWC3 core on the Exynos8855 is instantiated with the
generic dwc3 platform driver using a flattened model, where the
controller is directly addressable without a separate glue layer.

This series adds the device tree binding and platform driver support
for this configuration. The binding follows qcom,snps-dwc3 pattern:
a single node referencing snps,dwc3-common.yaml for shared DWC3
properties, with per-SoC constraints enforced via if-then conditionals.

The MAINTAINERS entry is updated first so that the new binding falls
under the existing ARM/Samsung SoC maintainership.

Selvarasu Ganesan (3):
  MAINTAINERS: add Samsung USB DT binding to ARM/SAMSUNG entry
  dt-bindings: usb: Introduce samsung,snps-dwc3
  usb: dwc3: Add Exynos8855 to the generic platform driver

 .../bindings/usb/samsung,snps-dwc3.yaml       | 98 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 drivers/usb/dwc3/dwc3-generic-plat.c          |  1 +
 3 files changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/samsung,snps-dwc3.yaml

-- 
2.17.1