[PATCH net-next v2 8/8] r8152: support UPS for RTL8157 and RTL8159

[Chih Kai Hsu <hsu.chih.kai@realtek.com>]

RTL8157 and RTL8159 support UPS but need different enable logic and EEE
flag handling than RTL8156. Add r8157_ups_en() and extend
r8156_ups_flags() with per-speed EEE flags (100M through 10G) and
5G/10G speed entries for VER_16/17.

Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com>
---
 drivers/net/usb/r8152.c | 110 +++++++++++++++++++++++++++++++++++-----
 1 file changed, 98 insertions(+), 12 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 2a96f3609c2b0..d219b242e1b2d 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -132,6 +132,7 @@
 #define USB_BURST_SIZE		0xcfc0
 #define USB_FW_FIX_EN0		0xcfca
 #define USB_FW_FIX_EN1		0xcfcc
+#define USB_FW_USE_VER          0xcfd7
 #define USB_LPM_CONFIG		0xcfd8
 #define USB_ECM_OPTION		0xcfee
 #define USB_CSTMR		0xcfef	/* RTL8153A */
@@ -619,6 +620,11 @@
 #define UPS_FLAGS_250M_CKDIV		BIT(2)
 #define UPS_FLAGS_EN_ALDPS		BIT(3)
 #define UPS_FLAGS_CTAP_SHORT_DIS	BIT(4)
+#define UPS_FLAGS_EN_100M_EEE		BIT(9)
+#define UPS_FLAGS_EN_1000M_EEE		BIT(10)
+#define UPS_FLAGS_EN_2500M_EEE		BIT(11)
+#define UPS_FLAGS_EN_5000M_EEE		BIT(12)
+#define UPS_FLAGS_EN_10G_EEE		BIT(13)
 #define UPS_FLAGS_SPEED_MASK		(0xf << 16)
 #define ups_flags_speed(x)		((x) << 16)
 #define UPS_FLAGS_EN_EEE		BIT(20)
@@ -4185,8 +4191,27 @@ static void r8156_ups_flags(struct r8152 *tp)
 	if (tp->ups_info.aldps)
 		ups_flags |= UPS_FLAGS_EN_ALDPS;
 
-	if (tp->ups_info.eee)
-		ups_flags |= UPS_FLAGS_EN_EEE;
+	if (tp->ups_info.eee) {
+		switch (tp->version) {
+		case RTL_VER_17_QFN68:
+			if (tp->eee_adv & MDIO_EEE_10GT)
+				ups_flags |= UPS_FLAGS_EN_10G_EEE;
+			fallthrough;
+		case RTL_VER_16:
+			if (tp->eee_adv & MDIO_EEE_100TX)
+				ups_flags |= UPS_FLAGS_EN_100M_EEE;
+			if (tp->eee_adv & MDIO_EEE_1000T)
+				ups_flags |= UPS_FLAGS_EN_1000M_EEE;
+			if (tp->eee_adv2 & MDIO_EEE_2_5GT)
+				ups_flags |= UPS_FLAGS_EN_2500M_EEE;
+			if (tp->eee_adv2 & MDIO_EEE_5GT)
+				ups_flags |= UPS_FLAGS_EN_5000M_EEE;
+			break;
+		default:
+			ups_flags |= UPS_FLAGS_EN_EEE;
+			break;
+		}
+	}
 
 	if (tp->ups_info.flow_control)
 		ups_flags |= UPS_FLAGS_EN_FLOW_CTR;
@@ -4237,20 +4262,33 @@ static void r8156_ups_flags(struct r8152 *tp)
 	case NWAY_2500M_FULL:
 		ups_flags |= ups_flags_speed(9);
 		break;
+	case NWAY_5000M_FULL:
+		ups_flags |= ups_flags_speed(10);
+		break;
+	case NWAY_10000M_FULL:
+		ups_flags |= ups_flags_speed(11);
+		break;
 	default:
 		break;
 	}
 
-	switch (tp->ups_info.lite_mode) {
-	case 1:
-		ups_flags |= 0 << 5;
-		break;
-	case 2:
-		ups_flags |= 2 << 5;
+	switch (tp->version) {
+	case RTL_VER_16:
+	case RTL_VER_17_QFN68:
 		break;
-	case 0:
 	default:
-		ups_flags |= 1 << 5;
+		switch (tp->ups_info.lite_mode) {
+		case 1:
+			ups_flags |= 0 << 5;
+			break;
+		case 2:
+			ups_flags |= 2 << 5;
+			break;
+		case 0:
+		default:
+			ups_flags |= 1 << 5;
+			break;
+		}
 		break;
 	}
 
@@ -4422,6 +4460,35 @@ static void r8156_ups_en(struct r8152 *tp, bool enable)
 	}
 }
 
+static void r8157_ups_en(struct r8152 *tp, bool enable)
+{
+	if (enable) {
+		r8156_ups_flags(tp);
+
+		ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_POWER_CUT,
+				  UPS_EN | USP_PREWAKE | PHASE2_EN);
+
+		ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_MISC_2,
+				  UPS_FORCE_PWR_DOWN);
+	} else {
+		ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_POWER_CUT,
+				  UPS_EN | USP_PREWAKE);
+
+		ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_MISC_2,
+				  UPS_FORCE_PWR_DOWN);
+
+		if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
+			/* clear USB fw_ver_reg */
+			ocp_write_byte(tp, MCU_TYPE_USB, USB_FW_USE_VER, 0);
+
+			tp->rtl_ops.hw_phy_cfg(tp);
+
+			rtl8152_set_speed(tp, tp->autoneg, tp->speed,
+					  tp->duplex, tp->advertising);
+		}
+	}
+}
+
 static void r8153_power_cut_en(struct r8152 *tp, bool enable)
 {
 	if (enable)
@@ -4580,9 +4647,28 @@ static void rtl8157_runtime_enable(struct r8152 *tp, bool enable)
 		r8153b_u1u2en(tp, false);
 		r8157_u2p3en(tp, false);
 		rtl_runtime_suspend_enable(tp, true);
+
+		switch (tp->version) {
+		case RTL_VER_16:
+		case RTL_VER_17_QFN68:
+			r8157_ups_en(tp, true);
+			break;
+		default:
+			break;
+		}
 	} else {
 		r8153_queue_wake(tp, false);
 		rtl_runtime_suspend_enable(tp, false);
+
+		switch (tp->version) {
+		case RTL_VER_16:
+		case RTL_VER_17_QFN68:
+			r8157_ups_en(tp, false);
+			break;
+		default:
+			break;
+		}
+
 		r8157_u2p3en(tp, true);
 		if (tp->udev->speed >= USB_SPEED_SUPER)
 			r8153b_u1u2en(tp, true);
@@ -9027,7 +9113,7 @@ static void r8157_init(struct r8152 *tp)
 	ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
 
 	r8157_power_cut_en(tp, false);
-	r8156_ups_en(tp, false);
+	r8157_ups_en(tp, false);
 	r8153_queue_wake(tp, false);
 	rtl_runtime_suspend_enable(tp, false);
 
@@ -9137,7 +9223,7 @@ static void r8159_init(struct r8152 *tp)
 	ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
 
 	r8157_power_cut_en(tp, false);
-	r8156_ups_en(tp, false);
+	r8157_ups_en(tp, false);
 	r8153_queue_wake(tp, false);
 	rtl_runtime_suspend_enable(tp, false);
 
-- 
2.34.1