From: Bin Meng <bin.meng@processmission.com>
To: QEMU <qemu-devel@nongnu.org>
Cc: Peter Maydell <peter.maydell@linaro.org>, qemu-arm@nongnu.org
Subject: [PATCH 19/33] hw/arm: phytium: Select the Phytium E2000 PBR boot medium
Date: Thu, 3 Sep 2026 19:24:59 +0800 [thread overview]
Message-ID: <20260903112532.3276678-20-bin.meng@processmission.com> (raw)
In-Reply-To: <20260903112532.3276678-1-bin.meng@processmission.com>
Introduce an abstract E2000 machine class and keep the Phytium Pi
board strap fixed to SD0. Pass the selected backend and boot-mode
property to the PBR device so firmware-visible boot-media state is
owned by PBR rather than a user-settable machine option.
The class-level selection also provides the board-specific hook
required by a later E2000Q COMe machine without allowing either
board to change its physical boot strap.
Signed-off-by: Bin Meng <bin.meng@processmission.com>
---
hw/arm/phytium_e2000.c | 84 +++++++++++++++++++++++++++++++-----------
1 file changed, 62 insertions(+), 22 deletions(-)
diff --git a/hw/arm/phytium_e2000.c b/hw/arm/phytium_e2000.c
index 1f2642df13..fe362dd4bd 100644
--- a/hw/arm/phytium_e2000.c
+++ b/hw/arm/phytium_e2000.c
@@ -44,8 +44,12 @@
#include "target/arm/cpu-qom.h"
#include "target/arm/gtimer.h"
+#define TYPE_PHYTIUM_E2000_MACHINE \
+ MACHINE_TYPE_NAME("phytium-e2000-base")
+OBJECT_DECLARE_TYPE(PhytiumE2000State, PhytiumE2000MachineClass,
+ PHYTIUM_E2000_MACHINE)
+
#define TYPE_PHYTIUM_PI MACHINE_TYPE_NAME("phytium-pi")
-OBJECT_DECLARE_SIMPLE_TYPE(PhytiumE2000State, PHYTIUM_PI)
#define PHYTIUM_E2000_NUM_CPUS 4
#define PHYTIUM_E2000_NUM_IRQS 256
@@ -100,7 +104,7 @@ enum {
};
struct PhytiumE2000State {
- MachineState parent;
+ MachineState parent_obj;
struct arm_boot_info bootinfo;
DeviceState *gic;
DeviceState *qspi;
@@ -113,6 +117,13 @@ struct PhytiumE2000State {
MemoryRegion ram_high;
};
+struct PhytiumE2000MachineClass {
+ MachineClass parent_class;
+
+ const char *machine_name;
+ const char *pbr_boot_mode;
+};
+
/*
* Keep the physical addresses used by the vendor firmware even before every
* device behind them is modeled. In particular, boot SRAM carries PBR/PBF
@@ -436,11 +447,16 @@ static void phytium_e2000_create_pcie(PhytiumE2000State *s)
}
}
-static void phytium_e2000_reject_legacy_firmware(MachineState *ms)
+static void phytium_e2000_reject_legacy_firmware(
+ MachineState *ms, PhytiumE2000MachineClass *pemc)
{
if (ms->firmware || drive_get(IF_PFLASH, 0, 0)) {
- error_report("phytium-pi: -bios and pflash firmware are not "
- "supported; use an if=sd,index=0 image");
+ error_report("%s: -bios and pflash firmware are not supported; "
+ "use an if=%s,index=0 image",
+ pemc->machine_name,
+ !strcmp(pemc->pbr_boot_mode,
+ PHYTIUM_E2000_PBR_BOOT_MODE_QSPI) ?
+ "mtd" : "sd");
exit(1);
}
}
@@ -509,13 +525,17 @@ static void phytium_e2000_create_qspi(PhytiumE2000State *s)
static bool phytium_e2000_create_pbr(PhytiumE2000State *s)
{
MachineState *ms = MACHINE(s);
+ PhytiumE2000MachineClass *pemc =
+ PHYTIUM_E2000_MACHINE_GET_CLASS(s);
DeviceState *dev = qdev_new(TYPE_PHYTIUM_E2000_PBR);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
BlockBackend *boot_blk = NULL;
uint64_t cpu_mpidrs[PHYTIUM_E2000_NUM_CPUS];
int i;
- if (!ms->kernel_filename) {
+ if (!ms->kernel_filename &&
+ !strcmp(pemc->pbr_boot_mode,
+ PHYTIUM_E2000_PBR_BOOT_MODE_SD0)) {
boot_blk = phytium_e2000_sd_blk(0);
}
@@ -523,8 +543,7 @@ static bool phytium_e2000_create_pbr(PhytiumE2000State *s)
cpu_mpidrs[i] = phytium_e2000_cpu_mp_affinity(i);
}
- qdev_prop_set_string(dev, "boot-mode",
- PHYTIUM_E2000_PBR_BOOT_MODE_SD0);
+ qdev_prop_set_string(dev, "boot-mode", pemc->pbr_boot_mode);
phytium_e2000_pbr_configure(PHYTIUM_E2000_PBR(dev), boot_blk,
phytium_e2000_memmap[
PHYTIUM_E2000_RAM].base,
@@ -735,19 +754,21 @@ static void phytium_e2000_create_cpus(PhytiumE2000State *s,
}
}
-static void phytium_pi_init(MachineState *ms)
+static void phytium_e2000_init(MachineState *ms)
{
- PhytiumE2000State *s = PHYTIUM_PI(ms);
+ PhytiumE2000State *s = PHYTIUM_E2000_MACHINE(ms);
+ PhytiumE2000MachineClass *pemc =
+ PHYTIUM_E2000_MACHINE_GET_CLASS(ms);
bool firmware_loaded;
int i;
if (kvm_enabled()) {
- error_report("phytium-pi: KVM is not supported");
+ error_report("%s: KVM is not supported", pemc->machine_name);
exit(1);
}
if (ms->smp.cpus > PHYTIUM_E2000_NUM_CPUS) {
- error_report("phytium-pi supports at most %d CPUs",
+ error_report("%s supports at most %d CPUs", pemc->machine_name,
PHYTIUM_E2000_NUM_CPUS);
exit(1);
}
@@ -755,11 +776,11 @@ static void phytium_pi_init(MachineState *ms)
if (ms->ram_size >
phytium_e2000_memmap[PHYTIUM_E2000_RAM].size +
phytium_e2000_memmap[PHYTIUM_E2000_RAM_HIGH].size) {
- error_report("phytium-pi supports at most 8 GiB RAM");
+ error_report("%s supports at most 8 GiB RAM", pemc->machine_name);
exit(1);
}
- phytium_e2000_reject_legacy_firmware(ms);
+ phytium_e2000_reject_legacy_firmware(ms, pemc);
phytium_e2000_create_ram(s);
phytium_e2000_create_unimplemented();
@@ -822,7 +843,7 @@ static const CPUArchIdList *phytium_e2000_possible_cpu_arch_ids(MachineState *ms
return ms->possible_cpus;
}
-static void phytium_pi_class_init(ObjectClass *oc, const void *data)
+static void phytium_e2000_class_init(ObjectClass *oc, const void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
static const char * const valid_cpu_types[] = {
@@ -831,8 +852,7 @@ static void phytium_pi_class_init(ObjectClass *oc, const void *data)
NULL,
};
- mc->init = phytium_pi_init;
- mc->desc = "Phytium Pi board (Phytium E2000Q)";
+ mc->init = phytium_e2000_init;
mc->default_cpu_type = ARM_CPU_TYPE_NAME("phytium-ftc664");
mc->valid_cpu_types = valid_cpu_types;
mc->max_cpus = PHYTIUM_E2000_NUM_CPUS;
@@ -844,22 +864,42 @@ static void phytium_pi_class_init(ObjectClass *oc, const void *data)
mc->default_ram_size = 2 * GiB;
mc->default_ram_id = "phytium-e2000.ram";
mc->minimum_page_bits = 12;
- mc->block_default_type = IF_SD;
mc->no_cdrom = 1;
mc->possible_cpu_arch_ids = phytium_e2000_possible_cpu_arch_ids;
}
+static void phytium_pi_class_init(ObjectClass *oc, const void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ PhytiumE2000MachineClass *pemc =
+ PHYTIUM_E2000_MACHINE_CLASS(oc);
+
+ mc->desc = "Phytium Pi board (Phytium E2000Q)";
+ mc->block_default_type = IF_SD;
+ pemc->machine_name = "phytium-pi";
+ pemc->pbr_boot_mode = PHYTIUM_E2000_PBR_BOOT_MODE_SD0;
+}
+
+static const TypeInfo phytium_e2000_base_info = {
+ .name = TYPE_PHYTIUM_E2000_MACHINE,
+ .parent = TYPE_MACHINE,
+ .abstract = true,
+ .class_init = phytium_e2000_class_init,
+ .class_size = sizeof(PhytiumE2000MachineClass),
+ .instance_size = sizeof(PhytiumE2000State),
+};
+
static const TypeInfo phytium_pi_info = {
.name = TYPE_PHYTIUM_PI,
- .parent = TYPE_MACHINE,
+ .parent = TYPE_PHYTIUM_E2000_MACHINE,
.class_init = phytium_pi_class_init,
- .instance_size = sizeof(PhytiumE2000State),
.interfaces = aarch64_machine_interfaces,
};
-static void phytium_pi_machine_init(void)
+static void phytium_e2000_machine_init(void)
{
+ type_register_static(&phytium_e2000_base_info);
type_register_static(&phytium_pi_info);
}
-type_init(phytium_pi_machine_init);
+type_init(phytium_e2000_machine_init);
--
2.53.0
next prev parent reply other threads:[~2026-09-03 11:28 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 11:24 [PATCH 00/33] hw/arm: Add Phytium E2000Q SoC and board support Bin Meng
2026-09-03 11:24 ` [PATCH 01/33] target/arm: Add Phytium FTC310 and FTC664 CPU models Bin Meng
2026-09-03 14:45 ` Alex Bennée
2026-09-05 3:39 ` Bin Meng
2026-09-03 11:24 ` [PATCH 02/33] hw/arm: Add basic Phytium Pi machine Bin Meng
2026-09-03 16:56 ` Philippe Mathieu-Daudé
2026-09-04 7:57 ` Bin Meng
2026-09-04 10:15 ` Philippe Mathieu-Daudé
2026-09-04 10:25 ` Daniel P. Berrangé
2026-09-04 10:28 ` Peter Maydell
2026-09-04 10:36 ` Daniel P. Berrangé
2026-09-04 10:47 ` Peter Maydell
2026-09-04 11:24 ` Philippe Mathieu-Daudé
2026-09-04 11:40 ` Daniel P. Berrangé
2026-09-04 10:25 ` Peter Maydell
2026-09-03 11:24 ` [PATCH 03/33] hw/arm: phytium: Add Phytium E2000 PCIe host Bin Meng
2026-09-03 11:24 ` [PATCH 04/33] hw/sd: Add Synopsys DesignWare MCI controller Bin Meng
2026-09-03 15:07 ` Philippe Mathieu-Daudé
2026-09-04 11:42 ` Bin Meng
2026-09-03 11:24 ` [PATCH 05/33] hw/sd: Add Phytium E2000 " Bin Meng
2026-09-03 11:24 ` [PATCH 06/33] hw/arm: phytium: Connect Phytium E2000 MCI controllers Bin Meng
2026-09-03 11:24 ` [PATCH 07/33] tests/qtest: Add Synopsys DesignWare MCI coverage Bin Meng
2026-09-03 11:24 ` [PATCH 08/33] hw/arm: phytium: Connect Phytium E2000 GEM controllers Bin Meng
2026-09-03 11:24 ` [PATCH 09/33] hw/misc: Add Phytium E2000 DDR status Bin Meng
2026-09-03 11:24 ` [PATCH 10/33] hw/arm: phytium: Connect the " Bin Meng
2026-09-03 11:24 ` [PATCH 11/33] hw/misc: Add Phytium E2000 MHU doorbell Bin Meng
2026-09-03 11:24 ` [PATCH 12/33] hw/arm: phytium: Connect the Phytium E2000 MHU Bin Meng
2026-09-03 11:24 ` [PATCH 13/33] hw/ssi: Add Phytium E2000 QSPI controller Bin Meng
2026-09-03 11:24 ` [PATCH 14/33] hw/arm: phytium: Connect the " Bin Meng
2026-09-03 11:24 ` [PATCH 15/33] hw/misc: Add Phytium E2000 PBR model Bin Meng
2026-09-03 11:24 ` [PATCH 16/33] hw/arm: phytium: Integrate the Phytium E2000 PBR Bin Meng
2026-09-03 11:24 ` [PATCH 17/33] hw/arm: phytium: Add Phytium E2000 control region placeholders Bin Meng
2026-09-03 11:24 ` [PATCH 18/33] hw/misc: Support Phytium E2000 SCMI CPU power control Bin Meng
2026-09-03 11:24 ` Bin Meng [this message]
2026-09-03 11:25 ` [PATCH 20/33] hw/arm: phytium: Connect the Phytium E2000 I2C controller Bin Meng
2026-09-03 11:25 ` [PATCH 21/33] hw/arm: phytium: Add Phytium E2000 xHCI controllers Bin Meng
2026-09-03 11:25 ` [PATCH 22/33] hw/misc: Model the Phytium E2000 random generator Bin Meng
2026-09-03 11:25 ` [PATCH 23/33] hw/arm: phytium: Connect " Bin Meng
2026-09-03 11:25 ` [PATCH 24/33] hw/arm: phytium: Support Phytium E2000 direct Linux boot Bin Meng
2026-09-03 11:25 ` [PATCH 25/33] hw/arm: phytium: Add Phytium E2000Q COMe machine Bin Meng
2026-09-03 11:25 ` [PATCH 26/33] hw/block: m25p80: Add GigaDevice GD25Q128 flash Bin Meng
2026-09-03 11:25 ` [PATCH 27/33] hw/arm: phytium: Connect the Phytium E2000Q COMe QSPI flash Bin Meng
2026-09-03 11:25 ` [PATCH 28/33] hw/arm: phytium: Add Phytium E2000 AHCI controllers Bin Meng
2026-09-03 11:25 ` [PATCH 29/33] hw/arm: Add Phytium E2000 Linux SCMI channel Bin Meng
2026-09-03 11:25 ` [PATCH 30/33] hw/arm: phytium: Connect the Phytium E2000 SMMUv3 Bin Meng
2026-09-03 11:25 ` [PATCH 31/33] docs/system/arm: Document Phytium E2000 machines Bin Meng
2026-09-03 11:25 ` [PATCH 32/33] tests/functional/aarch64: Add Phytium Pi boot tests Bin Meng
2026-09-03 14:38 ` Alex Bennée
2026-09-04 8:52 ` Bin Meng
2026-09-04 14:23 ` Alex Bennée
2026-09-03 11:25 ` [PATCH 33/33] MAINTAINERS: Add Phytium E2000Q machines Bin Meng
2026-09-03 15:08 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260903112532.3276678-20-bin.meng@processmission.com \
--to=bin.meng@processmission.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.