[PATCH BlueZ v2 0/2] input: avoid NSP1 disconnects caused by Sniff/Exit Sniff churn

["Frédéric Danis" <frederic.danis@collabora.com>]

We received reports of Bluetooth instability with Nintendo Switch Pro v1
(NSP1), including unexpected disconnects during use. HCI traces indicate
the controller repeatedly requests Sniff mode while BlueZ keeps forcing
Active mode, creating frequent Sniff/Exit Sniff transitions and increasing
the chance of LMP Sniff Response failures.

This series adds generic btio support to control force-active behavior for
L2CAP sockets, then uses it in the input profile for NSP1 by disabling
force-active on the HID interrupt channel. With that, BlueZ stops
repeatedly issuing Exit Sniff requests for this device, improving
connection stability.

v1->v2: Add missing Co-developed-by tag

Frédéric Danis (2):
  btio: add BT_IO_OPT_FORCE_ACTIVE support for L2CAP sockets
  profiles/input: disable force-active for Nintendo Switch Pro v1

 btio/btio.c             | 35 +++++++++++++++++++++++++++++++----
 btio/btio.h             |  1 +
 profiles/input/device.c | 16 ++++++++++++++++
 3 files changed, 48 insertions(+), 4 deletions(-)

-- 
2.43.0