From: <gregkh@linuxfoundation.org>
To: doruk@0sec.ai,jkosina@suse.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver" failed to apply to 6.1-stable tree
Date: Thu, 03 Sep 2026 15:28:33 +0200 [thread overview]
Message-ID: <2026090333-composer-outlook-0c0a@gregkh> (raw)
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x a26705bd2e2728833e7a538ce91e58a5eeff496a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090333-composer-outlook-0c0a@gregkh' --subject-prefix 'PATCH 6.1.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a26705bd2e2728833e7a538ce91e58a5eeff496a Mon Sep 17 00:00:00 2001
From: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Fri, 24 Jul 2026 16:27:03 +0200
Subject: [PATCH] HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver
unbind
For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer:
ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB
completion ghl_magic_poke_cb() re-arms the timer with mod_timer().
sony_remove() drained the timer with timer_delete_sync() and then freed
the URB with usb_free_urb():
timer_delete_sync(&sc->ghl_poke_timer);
usb_free_urb(sc->ghl_urb);
timer_delete_sync() does not block re-arming, and while the URB is in
flight the timer is not pending, so the sync delete is a no-op. A URB
completion that runs after the delete re-arms the timer, and usb_free_urb()
only drops a reference -- it does not kill an in-flight URB. sc is
allocated with devm_kzalloc() and freed once sony_remove() returns, so the
re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a
use-after-free from timer softirq. This is a disconnect/rmmod race.
Poison the URB first, then shut the timer down, before freeing the URB.
usb_poison_urb() kills any in-flight URB and permanently rejects further
submissions, so a poke timer that is still pending cannot re-submit the
URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs.
usb_kill_urb() would not suffice: it only cancels the in-flight URB and
leaves it submittable once it returns, so the pending timer could
re-submit it and put a fresh URB in flight over the freed sc.
timer_shutdown_sync() then drains any last callback and blocks re-arming.
The probe error path is unaffected: it is only reached before the timer
is armed.
Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget
emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds
and arms the poke timer, the poke URB is held in flight, the driver is
unbound (freeing sc), then the URB is released. The completion re-arms the
timer on the freed sc, and the re-armed timer fires ~8 s later:
BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0
Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0
ghl_magic_poke+0x98/0xb0
call_timer_fn+0x35/0x2b0
__run_timers+0x69c/0x9a0
run_timer_softirq+0x173/0x2a0
Allocated by task 169: sony_probe
Freed by task 338: devres_release_group <- hid_device_remove (sony_remove)
Found by 0sec (https://0sec.ai) using automated source analysis.
Fixes: cc894ac55360 ("HID: sony: support for ghlive ps3/wii u dongles")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:multi-model
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 5a7ab08cb825..52d156e1db39 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -2424,7 +2424,9 @@ static void sony_remove(struct hid_device *hdev)
struct sony_sc *sc = hid_get_drvdata(hdev);
if (sc->quirks & (GHL_GUITAR_PS3WIIU | GHL_GUITAR_PS4)) {
- timer_delete_sync(&sc->ghl_poke_timer);
+ /* poison, not kill: a pending timer must not re-submit during teardown */
+ usb_poison_urb(sc->ghl_urb);
+ timer_shutdown_sync(&sc->ghl_poke_timer);
usb_free_urb(sc->ghl_urb);
}
next reply other threads:[~2026-09-03 13:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 13:28 gregkh [this message]
2026-09-07 16:04 ` [PATCH 6.1.y] HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026090333-composer-outlook-0c0a@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=doruk@0sec.ai \
--cc=jkosina@suse.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.