From: David Laight <david.laight.linux@gmail.com>
To: Ridong Chen <ridong.chen@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>,
Michal Hocko <mhocko@kernel.org>,
Roman Gushchin <roman.gushchin@linux.dev>,
Shakeel Butt <shakeel.butt@linux.dev>,
Andrew Morton <akpm@linux-foundation.org>,
Muchun Song <muchun.song@linux.dev>,
Kairui Song <kasong@tencent.com>, Qi Zheng <qi.zheng@linux.dev>,
Barry Song <baohua@kernel.org>,
Axel Rasmussen <axelrasmussen@google.com>,
Yuanchu Xie <yuanchu@google.com>, Wei Xu <weixugc@google.com>,
David Hildenbrand <david@kernel.org>,
Lorenzo Stoakes <ljs@kernel.org>,
Chris Down <chris@chrisdown.name>, Tejun Heo <tj@kernel.org>,
Yu Zhao <yuzhao@google.com>,
cgroups@vger.kernel.org (open list:CONTROL GROUP - MEMORY
RESOURCE CONTROLLER (MEMCG)),
linux-mm@kvack.org (open list:CONTROL GROUP - MEMORY RESOURCE
CONTROLLER (MEMCG)),
linux-kernel@vger.kernel.org, Ridong Chen <chenridong@xiaomi.com>,
stable@vger.kernel.org
Subject: Re: [PATCH v3 1/2] mm/page_counter: avoid integer overflow in effective_protection()
Date: Fri, 4 Sep 2026 09:37:43 +0100 [thread overview]
Message-ID: <20260904093743.23cde26b@pumpkin> (raw)
In-Reply-To: <20260903031952.1120321-2-ridong.chen@linux.dev>
On Thu, 3 Sep 2026 11:19:51 +0800
Ridong Chen <ridong.chen@linux.dev> wrote:
> From: Ridong Chen <chenridong@xiaomi.com>
>
> effective_protection() scales a parent's protection by a ratio of page
> counts, e.g. for recursive protection:
>
> (parent_effective - siblings_protected) * (usage - protected)
> / (parent_usage - siblings_protected)
>
> The multiply is done at unsigned long width before dividing. On systems
> with >= 16TB RAM the product can exceed 2^64 and wrap, giving a bogus
> protection value and silently breaking memory.min/low enforcement.
>
> Use mul_u64_u64_div_u64() to multiply in a 128-bit intermediate. Because
> usage and parent_usage are not read atomically (a child is charged
> before its parent), usage - protected can briefly exceed the divisor,
> making the quotient overflow 64 bits and trap (#DE on x86). Cap it so
> the ratio stays <= 1.
>
> Reported by the sashiko review tool [1].
>
> [1] https://sashiko.dev/#/patchset/20260826133054.88529-1-ridong.chen@linux.dev?part=1
>
> Fixes: bc50bcc6e00b ("mm: memcontrol: clean up and document effective low/min calculations")
> Fixes: 8a931f801340 ("mm: memcontrol: recursive memory.low protection")
> Cc: stable@vger.kernel.org
> Assisted-by: Claude:claude-opus-4-8
> Reviewed-by: Barry Song <baohua@kernel.org>
> Signed-off-by: Ridong Chen <chenridong@xiaomi.com>
> ---
> mm/page_counter.c | 19 +++++++++++++------
> 1 file changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/mm/page_counter.c b/mm/page_counter.c
> index 661e0f2a5127..e8bd512069c5 100644
> --- a/mm/page_counter.c
> +++ b/mm/page_counter.c
> @@ -8,6 +8,7 @@
> #include <linux/page_counter.h>
> #include <linux/atomic.h>
> #include <linux/kernel.h>
> +#include <linux/math64.h>
> #include <linux/string.h>
> #include <linux/sched.h>
> #include <linux/bug.h>
> @@ -356,7 +357,8 @@ static unsigned long effective_protection(unsigned long usage,
> * otherwise get a smaller chunk than what they claimed.
> */
> if (siblings_protected > parent_effective)
> - return protected * parent_effective / siblings_protected;
> + return mul_u64_u64_div_u64(protected, parent_effective,
> + siblings_protected);
On 32bit it is only necessary to use a 64bit intermediary.
mul_u64_u64_div_u64() will drop back to the (probably faster) 64 by 64
divide (and then maybe to a 64 by 32 one).
But there is a lot of extra code before that happens.
>
> /*
> * Ok, utilized protection of all children is within what the
> @@ -397,13 +399,18 @@ static unsigned long effective_protection(unsigned long usage,
> if (parent_effective > siblings_protected &&
> parent_usage > siblings_protected &&
> usage > protected) {
> - unsigned long unclaimed;
> + unsigned long unclaimed = parent_effective - siblings_protected;
> + unsigned long unprotected = usage - protected;
> + unsigned long parent_unprotected = parent_usage - siblings_protected;
>
> - unclaimed = parent_effective - siblings_protected;
> - unclaimed *= usage - protected;
> - unclaimed /= parent_usage - siblings_protected;
> + /*
> + * The usages aren't read atomically, so a child can transiently
> + * appear to use more than its parent, making the ratio exceed 1
> + * and the quotient overflow 64 bits (#DE on x86). Cap it.
> + */
> + unprotected = min(unprotected, parent_unprotected);
>
> - ep += unclaimed;
> + ep += mul_u64_u64_div_u64(unclaimed, unprotected, parent_unprotected);
If the ratio is forced to 1 there is no point doing the scaling.
So maybe:
if (likely(parent_unprotected > unprotected))
unclaimed = mul_u64_u64_div_u64(unclaimed, unprotected,
parent_unprotected);
ep += unclaimed;
OTOH if the min() generates a cmov rather than a conditional branch
then you don't get a statically mispredicted branch in the normal case
(which is very likely with the empty 'else' branch).
David
> }
>
> return ep;
next prev parent reply other threads:[~2026-09-04 8:37 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 3:19 [PATCH v3 0/2] mm/mglru: fix ineffective memory protection for non-kswapd reclaim Ridong Chen
2026-09-03 3:19 ` [PATCH v3 1/2] mm/page_counter: avoid integer overflow in effective_protection() Ridong Chen
2026-09-03 14:00 ` Johannes Weiner
2026-09-04 3:34 ` Ridong Chen
2026-09-04 8:37 ` David Laight [this message]
2026-09-06 1:11 ` Ridong Chen
2026-09-06 10:16 ` David Laight
2026-09-07 2:08 ` Ridong Chen
2026-09-03 3:19 ` [PATCH v3 2/2] mm/mglru: fix ineffective memory protection for non-kswapd reclaim Ridong Chen
2026-09-03 6:30 ` Barry Song
2026-09-03 11:48 ` Ridong Chen
2026-09-03 14:09 ` Johannes Weiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260904093743.23cde26b@pumpkin \
--to=david.laight.linux@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=axelrasmussen@google.com \
--cc=baohua@kernel.org \
--cc=cgroups@vger.kernel.org \
--cc=chenridong@xiaomi.com \
--cc=chris@chrisdown.name \
--cc=david@kernel.org \
--cc=hannes@cmpxchg.org \
--cc=kasong@tencent.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=mhocko@kernel.org \
--cc=muchun.song@linux.dev \
--cc=qi.zheng@linux.dev \
--cc=ridong.chen@linux.dev \
--cc=roman.gushchin@linux.dev \
--cc=shakeel.butt@linux.dev \
--cc=stable@vger.kernel.org \
--cc=tj@kernel.org \
--cc=weixugc@google.com \
--cc=yuanchu@google.com \
--cc=yuzhao@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.