[PATCH 01/15] bnge: Add infrastructure support for RoCE MPC channels

[Siva Reddy Kallam <siva.kallam@broadcom.com>]

From: Saswati Das <saswati.das@broadcom.com>

Add the initial L2 driver plumbing for RoCE MPC (PRIMATE channel)
support:

- Plumb BAR1 through to the RoCE auxiliary device info, alongside the
  existing BAR0, so the RoCE driver can reach the doorbell BAR.

This will be used by follow-on patches to issue RoCE commands over the
MPC channels to the firmware.

Signed-off-by: Saswati Das <saswati.das@broadcom.com>
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Dharmender Garg <dharmender.garg@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnge/bnge_auxr.c | 1 +
 drivers/net/ethernet/broadcom/bnge/bnge_auxr.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnge/bnge_auxr.c b/drivers/net/ethernet/broadcom/bnge/bnge_auxr.c
index 0955b488b6fe..87ae40eab592 100644
--- a/drivers/net/ethernet/broadcom/bnge/bnge_auxr.c
+++ b/drivers/net/ethernet/broadcom/bnge/bnge_auxr.c
@@ -181,6 +181,7 @@ static void bnge_set_auxr_dev_info(struct bnge_auxr_dev *auxr_dev,
 	auxr_dev->pf_port_id = bd->pf.port_id;
 	auxr_dev->en_state = bd->state;
 	auxr_dev->bar0 = bd->bar0;
+	auxr_dev->bar1 = bd->bar1;
 }
 
 void bnge_rdma_aux_device_add(struct bnge_dev *bd)
diff --git a/drivers/net/ethernet/broadcom/bnge/bnge_auxr.h b/drivers/net/ethernet/broadcom/bnge/bnge_auxr.h
index 6c5c15ef2b0a..13cb9289f5b8 100644
--- a/drivers/net/ethernet/broadcom/bnge/bnge_auxr.h
+++ b/drivers/net/ethernet/broadcom/bnge/bnge_auxr.h
@@ -46,6 +46,7 @@ struct bnge_auxr_dev {
 	struct net_device	*net;
 	struct pci_dev		*pdev;
 	void __iomem		*bar0;
+	void __iomem		*bar1;
 
 	struct bnge_msix_info	msix_info[BNGE_MAX_ROCE_MSIX];
 
-- 
2.43.5