From: Hemanth Selam <hemanth.selam@gmail.com>
To: Minas Harutyunyan <hminas@synopsys.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [PATCH] usb: dwc2: fix typos in comments
Date: Fri, 4 Sep 2026 16:25:53 +0530 [thread overview]
Message-ID: <20260904105555.37215-1-hemanth.selam@gmail.com> (raw)
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
drivers/usb/dwc2/core.c | 2 +-
drivers/usb/dwc2/core.h | 2 +-
drivers/usb/dwc2/gadget.c | 6 +++---
drivers/usb/dwc2/hcd.c | 4 ++--
drivers/usb/dwc2/hcd_ddma.c | 2 +-
5 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index f375c5185bfe..6a0135e06b00 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -173,7 +173,7 @@ static void dwc2_restore_essential_regs(struct dwc2_hsotg *hsotg, int rmode,
/* Umnask global Interrupt in GAHBCFG and restore it */
dwc2_writel(hsotg, gr->gahbcfg | GAHBCFG_GLBL_INTR_EN, GAHBCFG);
- /* Clear all pending interupts */
+ /* Clear all pending interrupts */
dwc2_writel(hsotg, 0xffffffff, GINTSTS);
/* Unmask restore done interrupt */
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 767251aa1aa3..015a5fb7842d 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -334,7 +334,7 @@ enum dwc2_ep0_state {
* (default when phy_type is Full Speed)
* @oc_disable: Flag to disable overcurrent condition.
* 0 - Allow overcurrent condition to get detected
- * 1 - Disable overcurrent condtion to get detected
+ * 1 - Disable overcurrent condition to get detected
* @ts_dline: Enable Term Select Dline pulsing
* 0 - No (default)
* 1 - Yes
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 102169b40419..4f493601e728 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -658,7 +658,7 @@ static int dwc2_hsotg_write_fifo(struct dwc2_hsotg *hsotg,
}
/**
- * get_ep_limit - get the maximum data legnth for this endpoint
+ * get_ep_limit - get the maximum data length for this endpoint
* @hs_ep: The endpoint
*
* Return the maximum data that can be queued in one go on a given endpoint
@@ -5501,7 +5501,7 @@ int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg,
dwc2_hib_restore_common(hsotg, rem_wakeup, 0);
if (!reset) {
- /* Clear all pending interupts */
+ /* Clear all pending interrupts */
dwc2_writel(hsotg, 0xffffffff, GINTSTS);
}
@@ -5550,7 +5550,7 @@ int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg,
}
/* Wait for interrupts which must be cleared */
mdelay(2);
- /* Clear all pending interupts */
+ /* Clear all pending interrupts */
dwc2_writel(hsotg, 0xffffffff, GINTSTS);
/* Restore global registers */
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 2414291aa908..32ce38c7096a 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -5656,7 +5656,7 @@ int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
*/
mdelay(100);
- /* Clear all pending interupts */
+ /* Clear all pending interrupts */
dwc2_writel(hsotg, 0xffffffff, GINTSTS);
/* De-assert Restore */
@@ -5726,7 +5726,7 @@ int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
hprt0 = dwc2_readl(hsotg, HPRT0);
- /* Clear all pending interupts */
+ /* Clear all pending interrupts */
dwc2_writel(hsotg, 0xffffffff, GINTSTS);
/* Restore global registers */
diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c
index 994a78ad084b..703cda5a5895 100644
--- a/drivers/usb/dwc2/hcd_ddma.c
+++ b/drivers/usb/dwc2/hcd_ddma.c
@@ -963,7 +963,7 @@ static void dwc2_complete_isoc_xfer_ddma(struct dwc2_hsotg *hsotg,
* whether some of the descriptors (frames) succeeded or not.
* Pass error code to completion routine as well, to update
* urb->status, some of class drivers might use it to stop
- * queing transfer requests.
+ * queuing transfer requests.
*/
int err = halt_status == DWC2_HC_XFER_AHB_ERR ?
-EIO : -EOVERFLOW;
--
2.48.1
reply other threads:[~2026-09-04 10:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260904105555.37215-1-hemanth.selam@gmail.com \
--to=hemanth.selam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hminas@synopsys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.