From: sashiko-bot@kernel.org
To: "Josua Mayer" <josua@solid-run.com>
Cc: wsa+renesas@sang-engineering.com, robh@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v8 08/11] arm64: dts: renesas: add support for solidrun hb-ripple with rzg2l som
Date: Fri, 04 Sep 2026 12:10:46 +0000 [thread overview]
Message-ID: <20260904121047.7532F1F00A3D@smtp.kernel.org> (raw)
In-Reply-To: <20260904-rzg2-sr-boards-v8-8-94c4674927e8@solid-run.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] The shared device tree include file `rzg2l-hummingboard-pulse-common.dtsi` uses LED subsystem macros without including the required header, breaking self-containment.
--
commit d997057daebf169901ade156154724f6370de654
Author: Josua Mayer <josua@solid-run.com>
arm64: dts: renesas: add support for solidrun hb-ripple with rzg2l som
Add support for the SolidRun HummingBoard Ripple with RZ/G2L SoM, which is a
reduced version of HummingBoard Pulse featuring various connectors like USB,
Ethernet, micro-HDMI, and microSD.
> diff --git a/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-pulse-common.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-pulse-common.dtsi
> new file mode 100644
> index 0000000000000..b0ddd426241ab
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-pulse-common.dtsi
[ ... ]
> +&phy0 {
> + leds {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@0 {
> + reg = <0>;
> + color = <LED_COLOR_ID_ORANGE>;
> + default-state = "keep";
> + function = LED_FUNCTION_LAN;
> + };
> +
> + led@1 {
> + reg = <1>;
> + color = <LED_COLOR_ID_GREEN>;
> + default-state = "keep";
> + function = LED_FUNCTION_LAN;
> + };
> + };
> +};
[Severity: Low]
Should this file include dt-bindings/leds/common.h directly to remain
self-contained? The led@0 and led@1 nodes use LED_COLOR_ID_ORANGE,
LED_COLOR_ID_GREEN, and LED_FUNCTION_LAN, but the header defining these
macros is not included here.
[ ... ]
> diff --git a/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-ripple.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-ripple.dtsi
> new file mode 100644
> index 0000000000000..5e043e40641a6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-ripple.dtsi
> @@ -0,0 +1,127 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/*
> + * Copyright 2025 Josua Mayer <josua@solid-run.com>
> + */
> +
> +#include <dt-bindings/leds/common.h>
> +
> +#include "rzg2l-hummingboard-pulse-common.dtsi"
[Severity: Low]
Does rzg2l-hummingboard-pulse-common.dtsi rely on this include being placed
before it? If a future device tree includes
rzg2l-hummingboard-pulse-common.dtsi without also including
dt-bindings/leds/common.h beforehand, the build will fail due to the
undefined LED subsystem macros.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260904-rzg2-sr-boards-v8-0-94c4674927e8@solid-run.com?part=8
next prev parent reply other threads:[~2026-09-04 12:10 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-04 11:56 [PATCH v8 00/11] arm64: dts: renesas: Add various SolidRun RZ/G2 based boards Josua Mayer
2026-09-04 11:56 ` [PATCH v8 01/11] dt-bindings: soc: " Josua Mayer
2026-09-04 11:56 ` [PATCH v8 02/11] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow input-/output-disable Josua Mayer
2026-09-04 12:22 ` Geert Uytterhoeven
2026-09-04 11:56 ` [PATCH v8 03/11] dt-bindings: usb: cypress,hx3: make peer-hub property optional Josua Mayer
2026-09-04 11:56 ` [PATCH v8 04/11] arm64: dts: renesas: add support for solidrun rzg2l som and hb-iiot evb Josua Mayer
2026-09-04 11:56 ` [PATCH v8 05/11] arm64: dts: renesas: add support for solidrun rzv2l " Josua Mayer
2026-09-04 11:56 ` [PATCH v8 06/11] arm64: dts: renesas: add support for solidrun rzg2lc " Josua Mayer
2026-09-04 11:56 ` [PATCH v8 07/11] arm64: dts: renesas: rzg2l(c)/rzv2l hb-iiot: add dsi panel dt overlay Josua Mayer
2026-09-04 12:06 ` sashiko-bot
2026-09-04 11:56 ` [PATCH v8 08/11] arm64: dts: renesas: add support for solidrun hb-ripple with rzg2l som Josua Mayer
2026-09-04 12:10 ` sashiko-bot [this message]
2026-09-04 11:56 ` [PATCH v8 09/11] arm64: dts: renesas: add support for solidrun hb-ripple with rzv2l som Josua Mayer
2026-09-04 11:56 ` [PATCH v8 10/11] arm64: dts: renesas: add support for solidrun hb-ripple with rzg2lc som Josua Mayer
2026-09-04 11:56 ` [PATCH v8 11/11] arm64: dts: renesas: add support for solidrun rzg2ul som on hb-ripple Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260904121047.7532F1F00A3D@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=josua@solid-run.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.