From: sashiko-bot@kernel.org
To: "Janani Sunil" <janani.sunil@analog.com>
Cc: conor+dt@kernel.org, robh@kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v6 02/17] dt-bindings: iio: adc: Add AD7768
Date: Fri, 04 Sep 2026 14:21:26 +0000 [thread overview]
Message-ID: <20260904142126.DD79A1F00A3D@smtp.kernel.org> (raw)
In-Reply-To: <20260904-ad7768-driver-v6-2-e4378f946bfb@analog.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The binding defines properties for a GPIO controller but fails to include `gpio-controller` and `#gpio-cells` in the `required` list.
--
commit bc42d987ad118f0b1686ed33657b36a45a4a5392
Author: Janani Sunil <janani.sunil@analog.com>
dt-bindings: iio: adc: Add AD7768
Devicetree Bindings for AD7768-4 (4 channel) and AD7768 (8 channel)
simultaneous sampling ADCs.
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768.yaml
> new file mode 100644
> index 0000000000000..d8e489fa1f6ff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768.yaml
[ ... ]
> + sync-in-gpios:
> + maxItems: 1
> + description:
> + GPIO connected to the SYNC_IN pin. Receives the synchronization pulse
> + generated on SYNC_OUT in response to a START pulse. Must be synchronous
> + to the MCLK clock domain. In multi-device or daisy-chained systems,
> + two successive synchronization pulses must be applied to guarantee all
> + ADCs are synchronized.
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> +
> + adi,data-lines-number:
[ ... ]
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - avdd1-supply
> + - avdd2-supply
> + - iovdd-supply
> + - ref1p-supply
> + - ref2p-supply
> + - io-backends
[Severity: Medium]
The binding defines gpio-controller and #gpio-cells earlier in the schema,
indicating the hardware has GPIO provider capabilities. Should these
properties be added to this required list?
When hardware acts as a provider, the subsystem guidelines require the
corresponding standard properties to be explicitly listed as required.
Without this, incomplete device tree nodes that omit the GPIO properties
will silently pass schema validation, which might lead to runtime failures
if dependent devices attempt to use the GPIO functionality.
> +
> +allOf:
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> + - if:
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260904-ad7768-driver-v6-0-e4378f946bfb@analog.com?part=2
next prev parent reply other threads:[~2026-09-04 14:21 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-04 14:14 [PATCH v6 00/17] iio: adc: Add AD7768/AD7768-4 ADC driver support Janani Sunil
2026-09-04 14:14 ` [PATCH v6 01/17] iio: adc: adi-axi-adc: Initialize state mutex Janani Sunil
2026-09-04 14:14 ` [PATCH v6 02/17] dt-bindings: iio: adc: Add AD7768 Janani Sunil
2026-09-04 14:21 ` sashiko-bot [this message]
2026-09-04 17:08 ` Conor Dooley
2026-09-04 14:14 ` [PATCH v6 03/17] iio: backend: Add support for CRC Janani Sunil
2026-09-06 3:50 ` Jonathan Cameron
2026-09-04 14:14 ` [PATCH v6 04/17] iio: adc: adi-axi-adc: " Janani Sunil
2026-09-04 14:24 ` sashiko-bot
2026-09-04 14:14 ` [PATCH v6 05/17] iio: adc: Add AD7768 and AD7768-4 core support Janani Sunil
2026-09-04 14:31 ` sashiko-bot
2026-09-06 2:24 ` Jonathan Cameron
2026-09-06 3:05 ` Jonathan Cameron
2026-09-06 3:50 ` Jonathan Cameron
2026-09-07 11:25 ` Janani Sunil
2026-09-10 3:43 ` Jonathan Cameron
2026-09-06 8:34 ` Andy Shevchenko
2026-09-07 11:17 ` Janani Sunil
2026-09-04 14:14 ` [PATCH v6 06/17] iio: adc: ad7768: Validate master clock rate Janani Sunil
2026-09-04 14:14 ` [PATCH v6 07/17] iio: adc: ad7768: Add power mode helper Janani Sunil
2026-09-04 14:25 ` sashiko-bot
2026-09-06 3:50 ` Jonathan Cameron
2026-09-04 14:15 ` [PATCH v6 08/17] iio: adc: ad7768: Derive output data rates Janani Sunil
2026-09-04 14:15 ` [PATCH v6 09/17] iio: adc: ad7768: Configure channel sampling profiles Janani Sunil
2026-09-04 14:45 ` sashiko-bot
2026-09-06 3:50 ` Jonathan Cameron
2026-09-04 14:15 ` [PATCH v6 10/17] iio: adc: ad7768: Add sampling frequency controls Janani Sunil
2026-09-04 14:15 ` [PATCH v6 11/17] iio: adc: ad7768: Add per-channel filter controls Janani Sunil
2026-09-04 14:15 ` [PATCH v6 12/17] iio: adc: ad7768: Wait for digital filters to settle Janani Sunil
2026-09-04 14:15 ` [PATCH v6 13/17] iio: adc: ad7768: Add calibration controls Janani Sunil
2026-09-04 14:35 ` sashiko-bot
2026-09-06 3:50 ` Jonathan Cameron
2026-09-04 14:15 ` [PATCH v6 14/17] iio: adc: ad7768: Add per-channel conversion delay Janani Sunil
2026-09-04 14:33 ` sashiko-bot
2026-09-06 3:50 ` Jonathan Cameron
2026-09-04 14:15 ` [PATCH v6 15/17] iio: adc: ad7768: Add VCM regulator support Janani Sunil
2026-09-04 14:15 ` [PATCH v6 16/17] iio: adc: ad7768: Register GPIO auxiliary device Janani Sunil
2026-09-04 14:15 ` [PATCH v6 17/17] Documentation: iio: Add AD7768 Documentation Janani Sunil
2026-09-06 3:50 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260904142126.DD79A1F00A3D@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=janani.sunil@analog.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.