From: Markus Probst <markus.probst@posteo.de>
To: "Ayush Singh" <ayush@beagleboard.org>,
"Johan Hovold" <johan@kernel.org>,
"Alex Elder" <elder@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Miguel Ojeda" <ojeda@kernel.org>,
"Boqun Feng" <boqun@kernel.org>, "Gary Guo" <gary@garyguo.net>,
"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
"Benno Lossin" <lossin@kernel.org>,
"Andreas Hindborg" <a.hindborg@kernel.org>,
"Alice Ryhl" <aliceryhl@google.com>,
"Trevor Gross" <tmgross@umich.edu>,
"Danilo Krummrich" <dakr@kernel.org>,
"Daniel Almeida" <daniel.almeida@collabora.com>,
"Tamir Duberstein" <tamird@kernel.org>,
"Alexandre Courbot" <acourbot@nvidia.com>,
"Onur Özkan" <work@onurozkan.dev>,
"Eric Biggers" <ebiggers@kernel.org>,
"Ard Biesheuvel" <ardb@kernel.org>,
"Lorenzo Stoakes" <ljs@kernel.org>,
"Vlastimil Babka" <vbabka@kernel.org>,
"Liam R. Howlett" <liam@infradead.org>,
"Uladzislau Rezki" <urezki@gmail.com>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Rafael J. Wysocki" <rafael@kernel.org>
Cc: greybus-dev@lists.linaro.org, linux-serial@vger.kernel.org,
rust-for-linux@vger.kernel.org, linux-kernel@vger.kernel.org,
driver-core@lists.linux.dev,
Markus Probst <markus.probst@posteo.de>
Subject: [PATCH 1/5] tty: serdev: Export functions to pause receive_buf callback calls
Date: Sun, 06 Sep 2026 15:55:28 +0000 [thread overview]
Message-ID: <20260906-rust_serdev_probe_refactor-v1-1-69cdae0074ec@posteo.de> (raw)
In-Reply-To: <20260906-rust_serdev_probe_refactor-v1-0-69cdae0074ec@posteo.de>
These functions will be used to simply the serdev rust abstraction. It
also contributes to the fixing of 2 race conditions in the serdev rust
abstraction.
Signed-off-by: Markus Probst <markus.probst@posteo.de>
---
drivers/tty/serdev/core.c | 50 ++++++++++++++++++++++++++++++++++++-
drivers/tty/serdev/serdev-ttyport.c | 32 ++++++++++++++++++++++++
include/linux/serdev.h | 6 +++++
3 files changed, 87 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 7500efcdfc21..7d24f16710cb 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -187,6 +187,51 @@ void serdev_device_close(struct serdev_device *serdev)
}
EXPORT_SYMBOL_GPL(serdev_device_close);
+/**
+ * serdev_device_pause_rx() - pause data receive
+ * @serdev: serdev device
+ *
+ * Pause calls to receive_buf.
+ *
+ * The caller must guarantee that this does not run concurrently with
+ * `serdev_device_open` or `serdev_device_close`.
+ *
+ * Note that if a call to receive_buf is currently executed, the function will
+ * sleep until it has finished.
+ */
+void serdev_device_pause_rx(struct serdev_device *serdev)
+{
+ struct serdev_controller *ctrl = serdev->ctrl;
+
+ if (!ctrl || !ctrl->ops->pause_rx)
+ return;
+
+ ctrl->ops->pause_rx(ctrl);
+}
+EXPORT_SYMBOL_GPL(serdev_device_pause_rx);
+
+/**
+ * serdev_device_resume_rx() - resume data receive
+ * @serdev: serdev device
+ *
+ * Resume calls to receive_buf.
+ *
+ * The caller must guarantee that this does not run concurrently with
+ * `serdev_device_open` or `serdev_device_close`.
+ *
+ * This can be called even if not paused to ensure data receive is active.
+ */
+void serdev_device_resume_rx(struct serdev_device *serdev)
+{
+ struct serdev_controller *ctrl = serdev->ctrl;
+
+ if (!ctrl || !ctrl->ops->resume_rx)
+ return;
+
+ ctrl->ops->resume_rx(ctrl);
+}
+EXPORT_SYMBOL_GPL(serdev_device_resume_rx);
+
static void devm_serdev_device_close(void *serdev)
{
serdev_device_close(serdev);
@@ -398,6 +443,7 @@ EXPORT_SYMBOL_GPL(serdev_device_break_ctl);
static int serdev_drv_probe(struct device *dev)
{
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
+ struct serdev_device *sdev = to_serdev_device(dev);
int ret;
ret = dev_pm_domain_attach(dev, PD_FLAG_ATTACH_POWER_ON |
@@ -405,7 +451,9 @@ static int serdev_drv_probe(struct device *dev)
if (ret)
return ret;
- return sdrv->probe(to_serdev_device(dev));
+ serdev_device_resume_rx(sdev);
+
+ return sdrv->probe(sdev);
}
static void serdev_drv_remove(struct device *dev)
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index bab1b143b8a6..85ab454c2f13 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -6,9 +6,11 @@
#include <linux/serdev.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
#include <linux/poll.h>
#define SERPORT_ACTIVE 1
+#define SERPORT_PAUSE_RX 2
struct serport {
struct tty_port *port;
@@ -32,6 +34,9 @@ static size_t ttyport_receive_buf(struct tty_port *port, const u8 *cp,
if (!test_bit(SERPORT_ACTIVE, &serport->flags))
return 0;
+ if (test_bit(SERPORT_PAUSE_RX, &serport->flags))
+ return 0;
+
ret = serdev_controller_receive_buf(ctrl, cp, count);
dev_WARN_ONCE(&ctrl->dev, ret > count,
@@ -156,6 +161,31 @@ static void ttyport_close(struct serdev_controller *ctrl)
tty_release_struct(tty, serport->tty_idx);
}
+static void ttyport_pause_rx(struct serdev_controller *ctrl)
+{
+ struct serport *serport = serdev_controller_get_drvdata(ctrl);
+ struct tty_struct *tty = serport->tty;
+
+ if (test_bit(SERPORT_ACTIVE, &serport->flags))
+ tty_buffer_lock_exclusive(tty->port);
+
+ set_bit(SERPORT_PAUSE_RX, &serport->flags);
+
+ if (test_bit(SERPORT_ACTIVE, &serport->flags))
+ tty_buffer_unlock_exclusive(tty->port);
+}
+
+static void ttyport_resume_rx(struct serdev_controller *ctrl)
+{
+ struct serport *serport = serdev_controller_get_drvdata(ctrl);
+ struct tty_struct *tty = serport->tty;
+
+ clear_bit(SERPORT_PAUSE_RX, &serport->flags);
+
+ if (test_bit(SERPORT_ACTIVE, &serport->flags))
+ tty_flip_buffer_push(tty->port);
+}
+
static unsigned int ttyport_set_baudrate(struct serdev_controller *ctrl, unsigned int speed)
{
struct serport *serport = serdev_controller_get_drvdata(ctrl);
@@ -260,6 +290,8 @@ static const struct serdev_controller_ops ctrl_ops = {
.get_tiocm = ttyport_get_tiocm,
.set_tiocm = ttyport_set_tiocm,
.break_ctl = ttyport_break_ctl,
+ .pause_rx = ttyport_pause_rx,
+ .resume_rx = ttyport_resume_rx,
};
struct device *serdev_tty_port_register(struct tty_port *port,
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index b6c3d957ec15..5cf05df17ddf 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -89,6 +89,8 @@ struct serdev_controller_ops {
int (*get_tiocm)(struct serdev_controller *);
int (*set_tiocm)(struct serdev_controller *, unsigned int, unsigned int);
int (*break_ctl)(struct serdev_controller *ctrl, unsigned int break_state);
+ void (*pause_rx)(struct serdev_controller *ctrl);
+ void (*resume_rx)(struct serdev_controller *ctrl);
};
/**
@@ -194,6 +196,8 @@ static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctr
int serdev_device_open(struct serdev_device *);
void serdev_device_close(struct serdev_device *);
int devm_serdev_device_open(struct device *, struct serdev_device *);
+void serdev_device_pause_rx(struct serdev_device *serdev);
+void serdev_device_resume_rx(struct serdev_device *serdev);
unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
void serdev_device_set_flow_control(struct serdev_device *, bool);
int serdev_device_write_buf(struct serdev_device *, const u8 *, size_t);
@@ -233,6 +237,8 @@ static inline int serdev_device_open(struct serdev_device *sdev)
return -ENODEV;
}
static inline void serdev_device_close(struct serdev_device *sdev) {}
+static inline void serdev_device_pause_rx(struct serdev_device *serdev) {}
+static inline void serdev_device_resume_rx(struct serdev_device *serdev) {}
static inline unsigned int serdev_device_set_baudrate(struct serdev_device *sdev, unsigned int baudrate)
{
return 0;
--
2.55.0
next prev parent reply other threads:[~2026-09-06 15:55 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-06 15:55 [PATCH 0/5] rust: serdev: Refactor Markus Probst
2026-09-06 15:55 ` Markus Probst [this message]
2026-09-06 16:08 ` [PATCH 1/5] tty: serdev: Export functions to pause receive_buf callback calls sashiko-bot
2026-09-06 15:55 ` [PATCH 2/5] rust: serdev: Replace `active` mutex with receive pause Markus Probst
2026-09-06 16:09 ` sashiko-bot
2026-09-06 15:55 ` [PATCH 3/5] rust: serdev: Simplify callbacks Markus Probst
2026-09-06 16:13 ` sashiko-bot
2026-09-06 15:55 ` [PATCH 4/5] rust: Add `Device::drvdata_borrow_mut` Markus Probst
2026-09-06 16:08 ` sashiko-bot
2026-09-06 15:55 ` [PATCH 5/5] rust: serdev: Pause receive callback before calling unbind Markus Probst
2026-09-06 16:11 ` sashiko-bot
2026-09-06 16:20 ` Danilo Krummrich
2026-09-06 17:36 ` Markus Probst
2026-09-06 20:13 ` Gary Guo
2026-09-06 22:51 ` Markus Probst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260906-rust_serdev_probe_refactor-v1-1-69cdae0074ec@posteo.de \
--to=markus.probst@posteo.de \
--cc=a.hindborg@kernel.org \
--cc=acourbot@nvidia.com \
--cc=aliceryhl@google.com \
--cc=ardb@kernel.org \
--cc=ayush@beagleboard.org \
--cc=bjorn3_gh@protonmail.com \
--cc=boqun@kernel.org \
--cc=dakr@kernel.org \
--cc=daniel.almeida@collabora.com \
--cc=driver-core@lists.linux.dev \
--cc=ebiggers@kernel.org \
--cc=elder@kernel.org \
--cc=gary@garyguo.net \
--cc=gregkh@linuxfoundation.org \
--cc=greybus-dev@lists.linaro.org \
--cc=jirislaby@kernel.org \
--cc=johan@kernel.org \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=ljs@kernel.org \
--cc=lossin@kernel.org \
--cc=ojeda@kernel.org \
--cc=rafael@kernel.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=tamird@kernel.org \
--cc=tmgross@umich.edu \
--cc=urezki@gmail.com \
--cc=vbabka@kernel.org \
--cc=work@onurozkan.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.