From: Andreas Kemnade <andreas@kemnade.info>
To: Andrew Davis <afd@ti.com>
Cc: Tony Lindgren <tony@atomide.com>, Vignesh R <vigneshr@ti.com>,
Kevin Hilman <khilman@baylibre.com>,
"Roger Quadros" <rogerq@kernel.org>,
Andi Shyti <andi.shyti@kernel.org>, <linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-i2c@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/8] i2c: omap: Remove unused is_rdr and is_xdr variables
Date: Sun, 6 Sep 2026 09:41:06 +0200 [thread overview]
Message-ID: <20260906094106.41f8d2e7@kemnade.info> (raw)
In-Reply-To: <20260904131252.2126353-3-afd@ti.com>
On Fri, 4 Sep 2026 08:12:46 -0500
Andrew Davis <afd@ti.com> wrote:
> These are passed into omap_i2c_{receive,transmit}_data() but are never
> used, remove them.
>
> Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
> ---
> drivers/i2c/busses/i2c-omap.c | 14 ++++++--------
> 1 file changed, 6 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index 72f979eec7311..68b0a043f1e51 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -993,8 +993,7 @@ static int errata_omap3_i462(struct omap_i2c_dev *omap)
> return 0;
> }
>
> -static void omap_i2c_receive_data(struct omap_i2c_dev *omap, u8 num_bytes,
> - bool is_rdr)
> +static void omap_i2c_receive_data(struct omap_i2c_dev *omap, u8 num_bytes)
> {
> u16 w;
>
> @@ -1014,8 +1013,7 @@ static void omap_i2c_receive_data(struct omap_i2c_dev *omap, u8 num_bytes,
> }
> }
>
> -static int omap_i2c_transmit_data(struct omap_i2c_dev *omap, u8 num_bytes,
> - bool is_xdr)
> +static int omap_i2c_transmit_data(struct omap_i2c_dev *omap, u8 num_bytes)
> {
> u16 w;
>
> @@ -1119,7 +1117,7 @@ static int omap_i2c_xfer_data(struct omap_i2c_dev *omap)
> OMAP_I2C_BUFSTAT_REG) >> 8) & 0x3F;
> }
>
> - omap_i2c_receive_data(omap, num_bytes, true);
> + omap_i2c_receive_data(omap, num_bytes);
> omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR);
> continue;
> }
> @@ -1130,7 +1128,7 @@ static int omap_i2c_xfer_data(struct omap_i2c_dev *omap)
> if (omap->threshold)
> num_bytes = omap->threshold;
>
> - omap_i2c_receive_data(omap, num_bytes, false);
> + omap_i2c_receive_data(omap, num_bytes);
> omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RRDY);
> continue;
> }
> @@ -1142,7 +1140,7 @@ static int omap_i2c_xfer_data(struct omap_i2c_dev *omap)
> if (omap->fifo_size)
> num_bytes = omap->buf_len;
>
> - ret = omap_i2c_transmit_data(omap, num_bytes, true);
> + ret = omap_i2c_transmit_data(omap, num_bytes);
> if (ret < 0)
> break;
>
> @@ -1157,7 +1155,7 @@ static int omap_i2c_xfer_data(struct omap_i2c_dev *omap)
> if (omap->threshold)
> num_bytes = omap->threshold;
>
> - ret = omap_i2c_transmit_data(omap, num_bytes, false);
> + ret = omap_i2c_transmit_data(omap, num_bytes);
> if (ret < 0)
> break;
>
next prev parent reply other threads:[~2026-09-06 7:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-04 13:12 [PATCH 0/8] OMAP I2C driver cleanups Andrew Davis
2026-09-04 13:12 ` [PATCH 1/8] i2c: omap: Drop bit shift for I2C register addresses Andrew Davis
2026-09-06 7:33 ` Andreas Kemnade
2026-09-04 13:12 ` [PATCH 2/8] i2c: omap: Remove unused is_rdr and is_xdr variables Andrew Davis
2026-09-06 7:41 ` Andreas Kemnade [this message]
2026-09-04 13:12 ` [PATCH 3/8] i2c: omap: Use devm_pm_runtime_enable() helper Andrew Davis
2026-09-04 13:12 ` [PATCH 4/8] i2c: omap: Combine event flags register definitions Andrew Davis
2026-09-04 13:12 ` [PATCH 5/8] i2c: omap: Use bool for flag values Andrew Davis
2026-09-04 13:12 ` [PATCH 6/8] i2c: omap: Make reset bit name match register name Andrew Davis
2026-09-04 13:12 ` [PATCH 7/8] i2c: omap: Switch to using BIT and GENMASK Andrew Davis
2026-09-04 13:12 ` [PATCH 8/8] i2c: omap: Add OMAP_I2C_BUF_{TX,RX}TRSH definitions Andrew Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260906094106.41f8d2e7@kemnade.info \
--to=andreas@kemnade.info \
--cc=afd@ti.com \
--cc=andi.shyti@kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=rogerq@kernel.org \
--cc=tony@atomide.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.