All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hemanth Selam <hemanth.selam@gmail.com>
To: Russell King <linux@armlinux.org.uk>, Frank Li <Frank.Li@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Aaro Koskinen <aaro.koskinen@iki.fi>,
	Andreas Kemnade <andreas@kemnade.info>,
	Kevin Hilman <khilman@baylibre.com>,
	Roger Quadros <rogerq@kernel.org>,
	Tony Lindgren <tony@atomide.com>, Paul Walmsley <paul@pwsan.com>,
	Thierry Reding <thierry.reding@kernel.org>,
	Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-tegra@vger.kernel.org
Subject: [PATCH] ARM: fix typos in comments
Date: Mon,  7 Sep 2026 12:18:49 +0530	[thread overview]
Message-ID: <20260907064849.23086-1-hemanth.selam@gmail.com> (raw)

Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt.  Only touches comments, no code
changes.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
 arch/arm/mach-imx/suspend-imx6.S           | 2 +-
 arch/arm/mach-omap2/omap4-common.c         | 2 +-
 arch/arm/mach-omap2/omap_hwmod.c           | 6 +++---
 arch/arm/mach-omap2/powerdomains7xx_data.c | 2 +-
 arch/arm/mach-tegra/pm.c                   | 2 +-
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index 63ccc2d0e920..3f8670296358 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -234,7 +234,7 @@ set_mmdc_io_lpm_done:
 	 * mask all GPC interrupts before
 	 * enabling the RBC counters to
 	 * avoid the counter starting too
-	 * early if an interupt is already
+	 * early if an interrupt is already
 	 * pending.
 	 */
 	ldr	r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 5d924b85b694..633451b6f548 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -96,7 +96,7 @@ static void omap4_mb(void)
  * interconnects.
  *
  * This situation can happen only when the idle is initiated by a Master
- * Request Disconnection (which is trigged by software when executing WFI
+ * Request Disconnection (which is triggered by software when executing WFI
  * on the CPU).
  *
  * The work-around for this errata needs all the initiators connected
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 03cd523dff87..0f4ba19804c6 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -646,7 +646,7 @@ static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
  * @oh: struct omap_hwmod *
  *
  * Prevent the hardware module @oh from entering idle while the
- * hardare module initiator @init_oh is active.  Useful when a module
+ * hardware module initiator @init_oh is active.  Useful when a module
  * will be accessed by a particular initiator (e.g., if a module will
  * be accessed by the IVA, there should be a sleepdep between the IVA
  * initiator and the module).  Only applies to modules in smart-idle
@@ -674,7 +674,7 @@ static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
  * _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active
  * @oh: struct omap_hwmod *
  *
- * Allow the hardware module @oh to enter idle while the hardare
+ * Allow the hardware module @oh to enter idle while the hardware
  * module initiator @init_oh is active.  Useful when a module will not
  * be accessed by a particular initiator (e.g., if a module will not
  * be accessed by the IVA, there should be no sleepdep between the IVA
@@ -1706,7 +1706,7 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 		return -EINVAL;
 	}
 
-	/* For some modules, all optionnal clocks need to be enabled as well */
+	/* For some modules, all optional clocks need to be enabled as well */
 	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
 		_enable_optional_clocks(oh);
 
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
index 921cb1b29cb4..df13451bd0f4 100644
--- a/arch/arm/mach-omap2/powerdomains7xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -223,7 +223,7 @@ static struct powerdomain mpu_7xx_pwrdm = {
 	},
 };
 
-/* l3init_7xx_pwrdm: L3 initators pheripherals power domain  */
+/* l3init_7xx_pwrdm: L3 initiators pheripherals power domain  */
 static struct powerdomain l3init_7xx_pwrdm = {
 	.name		  = "l3init_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_L3INIT_INST,
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index b21f51b8e19e..d7bc21bdb519 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -257,7 +257,7 @@ static int tegra_sleep_core(unsigned long v2p)
  * tegra_lp1_iram_hook
  *
  * Hooking the address of LP1 reset vector and SDRAM self-refresh code in
- * SDRAM. These codes not be copied to IRAM in this fuction. We need to
+ * SDRAM. These codes not be copied to IRAM in this function. We need to
  * copy these code to IRAM before LP0/LP1 suspend and restore the content
  * of IRAM after resume.
  */
-- 
2.48.1


                 reply	other threads:[~2026-09-07  6:48 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260907064849.23086-1-hemanth.selam@gmail.com \
    --to=hemanth.selam@gmail.com \
    --cc=Frank.Li@nxp.com \
    --cc=aaro.koskinen@iki.fi \
    --cc=andreas@kemnade.info \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=jonathanh@nvidia.com \
    --cc=kernel@pengutronix.de \
    --cc=khilman@baylibre.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=paul@pwsan.com \
    --cc=rogerq@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=thierry.reding@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.