[PATCH v2 1/2] media: i2c: cvs: Add Lattice device quirk for VID:0x2ac1 PID:0x20d1

[Kate Hsuan <hpa@redhat.com>]

On Dell laptops such as the XPS 14 (DA14250), the IPU6 camera fails to
initialize due to a missing device quirk for the Lattice device. The
kernel logs the following error during probe:

[  7.299665] intel_cvs i2c-INTC10E0:00: No quirks for device (VID:0x2ac1 PID:0x20d1)
[  7.299976] intel_cvs i2c-INTC10E0:00: error -EREMOTEIO: get caps failed
[  7.300026] intel_cvs i2c-INTC10E0:00: probe with driver intel_cvs failed with error -121

Add a matching quirk entry for VID 0x2ac1 and PID 0x20d1 to allow
intel_cvs to configure the device properly and enable the camera.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2526246
Signed-off-by: Kate Hsuan <hpa@redhat.com>
---
 drivers/media/i2c/cvs/core.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/media/i2c/cvs/core.c b/drivers/media/i2c/cvs/core.c
index d4a3b9c3bab1..acf8a4f7e79f 100644
--- a/drivers/media/i2c/cvs/core.c
+++ b/drivers/media/i2c/cvs/core.c
@@ -70,6 +70,13 @@ static const struct icvs_device_quirk cvs_quirk_table[] = {
 			  ICVS_NO_CAPS |
 			  ICVS_NO_FW_UPDATE
 	},	/* Lattice NX33 */
+	{ 0x2ac1, 0x20d1, ICVS_NO_MIPI_CONFIG |
+			  ICVS_NO_CAPS |
+			  ICVS_NO_FW_UPDATE
+	},	/*
+		 * The Lattice device was found on a Dell laptop
+		 * XPS 14 (Dell 14 Premium) DA14250
+		 */
 	{ 0x06CB, 0x0701, ICVS_SKIP_FW_RESET |
 			  ICVS_HOST_SENSOR_PWR_CTRL |
 			  ICVS_HOST_PRIV_CTRL |
-- 
2.55.0