[PATCH net-next v3 03/10] net: broadcom: fix typos in comments

[Hemanth Selam <hemanth.selam@gmail.com>]

Fix misspellings in comments, found with scripts/checkpatch.pl using
the misspelling list in scripts/spelling.txt.  Comments only, no code
changes.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
 drivers/net/ethernet/broadcom/bcm63xx_enet.c         | 2 +-
 drivers/net/ethernet/broadcom/bcm63xx_enet.h         | 2 +-
 drivers/net/ethernet/broadcom/bcmsysport.h           | 2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h          | 4 ++--
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c      | 4 ++--
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h      | 2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h | 2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c     | 8 ++++----
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c     | 2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h      | 4 ++--
 10 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index 7ef1babfeca6..f6595fdc888d 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1564,7 +1564,7 @@ static int bcm_enet_set_pauseparam(struct net_device *dev,
 
 	if (priv->has_phy) {
 		if (ecmd->autoneg && (ecmd->rx_pause != ecmd->tx_pause)) {
-			/* asymetric pause mode not supported,
+			/* asymmetric pause mode not supported,
 			 * actually possible but integrated PHY has RO
 			 * asym_pause bit */
 			return -EINVAL;
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.h b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
index 78f1830fb3cb..ba8f42cf5fb2 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
@@ -265,7 +265,7 @@ struct bcm_enet_priv {
 	/* number of available descriptor for tx */
 	int tx_desc_count;
 
-	/* next tx descriptor avaiable */
+	/* next tx descriptor available */
 	int tx_curr_desc;
 
 	/* next dirty tx descriptor to reclaim */
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h
index a34296f989f1..6f807e96dbd8 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.h
+++ b/drivers/net/ethernet/broadcom/bcmsysport.h
@@ -402,7 +402,7 @@ struct bcm_rsb {
 #define TDMA_DESC_RING_BASE(i)		(TDMA_DESC_RING_00_BASE + \
 					((i) * TDMA_DESC_RING_SIZE))
 
-/* Ring indexed register addreses */
+/* Ring indexed register addresses */
 #define TDMA_DESC_RING_HEAD_TAIL_PTR(i)	(TDMA_DESC_RING_BASE(i) + \
 					RING_HEAD_TAIL_PTR)
 #define TDMA_DESC_RING_COUNT(i)		(TDMA_DESC_RING_BASE(i) + \
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 9580ab83d387..28ea4a33f245 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -280,7 +280,7 @@ enum {
  * (db_msg_sz 1 << 7 * cid + 0x40 DPM offset) it can come up with a valid number
  * We must avoid coming up with cid 8 for iscsi since according to this method
  * the designated UIO cid will come out 0 and it has a special handling for that
- * case which doesn't suit us. Therefore will will cieling to closes cid which
+ * case which doesn't suit us. Therefore will cieling to closes cid which
  * has least signigifcant nibble 8 and if it is 8 we will move forward to 0x18.
  */
 
@@ -666,7 +666,7 @@ struct bnx2x_fastpath {
 				 MAX_TX_DESC_CNT * NEXT_PAGE_TX_DESC_CNT)
 /* max BDs per tx packet w/o next_pages:
  * START_BD		- describes packed
- * START_BD(splitted)	- includes unpaged data segment for GSO
+ * START_BD(split)	- includes unpaged data segment for GSO
  * PARSING_BD		- for TSO and CSUM data
  * PARSING_BD2		- for encapsulation data
  * Frag BDs		- describes pages for frags
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
index 9af81630c8a4..3df8a5988521 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
@@ -1986,7 +1986,7 @@ static void bnx2x_dcbnl_set_pg_tccfg_tx(struct net_device *netdev, int prio,
 		return;
 
 	/**
-	 * bw_pct ignored -	band-width percentage devision between user
+	 * bw_pct ignored -	band-width percentage division between user
 	 *			priorities within the same group is not
 	 *			standard and hence not supported
 	 *
@@ -2038,7 +2038,7 @@ static void bnx2x_dcbnl_get_pg_tccfg_tx(struct net_device *netdev, int prio,
 	DP(BNX2X_MSG_DCB, "prio = %d\n", prio);
 
 	/**
-	 * bw_pct ignored -	band-width percentage devision between user
+	 * bw_pct ignored -	band-width percentage division between user
 	 *			priorities within the same group is not
 	 *			standard and hence not supported
 	 *
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 611efee75834..5297ab578a6f 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -2342,7 +2342,7 @@ struct shmem2_region {
 		u32 oem_i2c_data_addr;
 	};
 
-	/* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */
+	/* 9 entries for the C2S PCP map for each inner VLAN PCP + 1 default */
 	/* For PCP values 0-3 use the map lower */
 	/* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1,
 	 * 0x0000FF00 - PCP 2, 0x000000FF PCP 3
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
index fc7fce642666..b5004aab124d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
@@ -582,7 +582,7 @@ static void bnx2x_init_pxp_arb(struct bnx2x *bp, int r_order,
 		REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
 	}
 
-	/* Validate number of tags suppoted by device */
+	/* Validate number of tags supported by device */
 #define PCIE_REG_PCIER_TL_HDR_FC_ST		0x2980
 	val = REG_RD(bp, PCIE_REG_PCIER_TL_HDR_FC_ST);
 	val &= 0xFF;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index ea310057fe3a..84d002b31920 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -2536,7 +2536,7 @@ static int bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
 }
 
 /**
- * bnx2x_get_emac_base - retrive emac base address
+ * bnx2x_get_emac_base - retrieve emac base address
  *
  * @bp:			driver handle
  * @mdc_mdio_access:	access type
@@ -3593,7 +3593,7 @@ static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy,
 	u8 ret = 0;
 	vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
 	if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) {
-		/* Update the advertised flow-controled of LD/LP in AN */
+		/* Update the advertised flow-controlled of LD/LP in AN */
 		if (phy->req_line_speed == SPEED_AUTO_NEG)
 			bnx2x_ext_phy_update_adv_fc(phy, params, vars);
 		/* But set the flow-control result as the requested one */
@@ -3743,7 +3743,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 		{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0},
 	};
 	DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n");
-	/* Set to default registers that may be overriden by 10G force */
+	/* Set to default registers that may be overridden by 10G force */
 	for (i = 0; i < ARRAY_SIZE(reg_set); i++)
 		bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
 				 reg_set[i].val);
@@ -5425,7 +5425,7 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x_phy *phy,
 
 	/* Resolve from gp_status in case of AN complete and not sgmii */
 	if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) {
-		/* Update the advertised flow-controled of LD/LP in AN */
+		/* Update the advertised flow-controlled of LD/LP in AN */
 		if (phy->req_line_speed == SPEED_AUTO_NEG)
 			bnx2x_update_adv_fc(phy, params, vars, gp_status);
 		/* But set the flow-control result as the requested one */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 39eb6ab5f805..277c7bd9c6e7 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12669,7 +12669,7 @@ static int bnx2x_set_mc_list(struct bnx2x *bp)
 		if (rc)
 			return rc;
 
-		/* Override the curently configured set of mc filters */
+		/* Override the currently configured set of mc filters */
 		rc = bnx2x_config_mcast(bp, &rparam,
 					BNX2X_MCAST_CMD_SET);
 		if (rc < 0)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index a018f251d198..30943f347164 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -2236,7 +2236,7 @@ extern const u32 dmae_reg_go_c[];
 /* [RW 1] Output enable for TX PAUSE signal to the MAC. */
 #define NIG_REG_P0_MAC_PAUSE_OUT_EN				 0x185b4
 /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
- * future expansion) each priorty is to be mapped to. Bits 3:0 specify the
+ * future expansion) each priority is to be mapped to. Bits 3:0 specify the
  * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
  * priority field is extracted from the outer-most VLAN in receive packet.
  * Only COS 0 and COS 1 are supported in E2. */
@@ -2434,7 +2434,7 @@ extern const u32 dmae_reg_go_c[];
 /* [RW 1] Output enable for TX PAUSE signal to the MAC. */
 #define NIG_REG_P1_MAC_PAUSE_OUT_EN				 0x185c8
 /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
- * future expansion) each priorty is to be mapped to. Bits 3:0 specify the
+ * future expansion) each priority is to be mapped to. Bits 3:0 specify the
  * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
  * priority field is extracted from the outer-most VLAN in receive packet.
  * Only COS 0 and COS 1 are supported in E2. */
-- 
2.48.1