[PATCH v1 0/3] net/ntnic: fix virt queue data in BSS

[Serhii Iliushyk <sil-plv@napatech.com>]

This series addresses the bug report "ntnic: virt queue data in BSS"
(Bugzilla ID: 1975). The report lists five problems with keeping the
virt queue state in static arrays; each is addressed as follows.

- BSS memory is slower than hugepages because of TLB overhead, which
  can cause performance loss in the hot path.
  The per-queue state, and the copy of the packet buffer descriptors
  indexed on every burst, are now allocated from the EAL heap.

- Hard coding the size wastes space.
  The 128-entry Rx and Tx arrays are gone; one object is allocated
  per configured queue and freed when the queue is released.

- Data in BSS is not visible to a secondary process.
  The state now lives in EAL memory. The PMD still does not support
  primary/secondary operation, but this no longer stands in the way.

- NUMA aware allocation was not possible.
  Both allocations are made with rte_zmalloc_socket() on the NUMA
  node of the adapter, next to the rings and buffers they describe.

- Cache alignment.
  The queue object is cache line aligned and no longer shares a line
  with a neighboring queue.

Patch 1 drops two never-called setup ops so that only the managed
setup and release paths own the queue state. Patch 2 makes a failed
hardware setup visible to the caller, which patch 3 relies on to free
the queue object on failure. Patch 3 is the fix itself; it also fixes
a leak of the descriptor copy on queue re-setup and an ignored
allocation failure that led to a NULL dereference in the burst
functions.

Serhii Iliushyk (3):
  net/ntnic: remove unused unmanaged virt queue setup ops
  net/ntnic: check virt queue hardware setup result
  net/ntnic: fix virt queue data in BSS

 drivers/net/ntnic/dbsconfig/ntnic_dbsconfig.c | 334 +++++++++++-------
 drivers/net/ntnic/ntnic_ethdev.c              |  52 ++-
 drivers/net/ntnic/ntnic_mod_reg.h             |  30 --
 3 files changed, 245 insertions(+), 171 deletions(-)

-- 
2.45.0