All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pranjal Shrivastava <praan@google.com>
To: iommu@lists.linux.dev
Cc: Will Deacon <will@kernel.org>, Joerg Roedel <joro@8bytes.org>,
	 Robin Murphy <robin.murphy@arm.com>,
	Jason Gunthorpe <jgg@ziepe.ca>,
	Mostafa Saleh <smostafa@google.com>,
	 Nicolin Chen <nicolinc@nvidia.com>,
	Daniel Mentz <danielmentz@google.com>,
	 Ashish Mhetre <amhetre@nvidia.com>,
	linux-arm-kernel@lists.infradead.org,
	 Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	rafael@kernel.org,  Danilo Krummrich <dakr@kernel.org>,
	Thomas Gleixner <tglx@kernel.org>,
	driver-core@lists.linux.dev,
	 Pranjal Shrivastava <praan@google.com>,
	Jason Gunthorpe <jgg@nvidia.com>
Subject: [PATCH v10 01/15] iommu/arm-smmu-v3: Refactor arm_smmu_setup_irqs
Date: Tue,  8 Sep 2026 17:16:57 +0000	[thread overview]
Message-ID: <20260908171712.356645-2-praan@google.com> (raw)
In-Reply-To: <20260908171712.356645-1-praan@google.com>

Refactor arm_smmu_setup_irqs by splitting it into two parts, one for
registering interrupt handlers and the other one for enabling interrupt
generation in the hardware. This refactor helps in re-initialization of
hardware interrupts as part of a subsequent patch that enables runtime
power management for the arm-smmu-v3 driver.

Additionally, pass a 'resume' flag to arm_smmu_device_reset() to skip
registering IRQ handlers again during resume. On probe, handlers are
registered after queues are configured but before enabling translation.

Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 75 +++++++++++++++------
 1 file changed, 56 insertions(+), 19 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 5732f3ba0122..270e6617a19a 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -4756,14 +4756,55 @@ static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
 	}
 }
 
+static void arm_smmu_enable_irqs(struct arm_smmu_device *smmu)
+{
+	int ret;
+	u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
+
+	if (smmu->features & ARM_SMMU_FEAT_PRI)
+		irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
+
+	/*
+	 * Enable interrupt generation on the SMMU.
+	 * As per the ARM SMMUv3 spec section 6.3.17 (SMMU_IRQ_CTRL):
+	 *
+	 * Completion of an Update of x_IRQEN from 0 to 1 guarantees that the
+	 * MSI configuration in SMMU_x_IRQ_CFG{0,1,2} will be used for all
+	 * future MSIs generated from source x. All wired or MSI interrupts
+	 * that are triggered from a source relate to occurrences that happened
+	 * after the completion of the Update that enabled the source. It is
+	 * not permitted to trigger an interrupt that relates to an occurrence
+	 * that happened before the source was enabled, even if the source was
+	 * previously enabled at the time of the occurrence.
+	 */
+	ret = arm_smmu_write_reg_sync(smmu, irqen_flags,
+				      ARM_SMMU_IRQ_CTRL, ARM_SMMU_IRQ_CTRLACK);
+	if (ret)
+		dev_warn(smmu->dev, "failed to enable irqs\n");
+}
+
+static int arm_smmu_disable_irqs(struct arm_smmu_device *smmu)
+{
+	return arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
+				       ARM_SMMU_IRQ_CTRLACK);
+}
+
 static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
 {
 	int ret, irq;
-	u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
 
-	/* Disable IRQs first */
-	ret = arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
-				      ARM_SMMU_IRQ_CTRLACK);
+	/*
+	 * Disable IRQs first as required by the Arm SMMUv3 spec.
+	 * As per the ARM SMMUv3 spec section 6.3.17 (SMMU_IRQ_CTRL):
+	 *
+	 * An Update of x_IRQEN from 1 to 0 completes when all prior MSIs have
+	 * completed. An MSI has completed when it is visible to its
+	 * Shareability domain, or when it has aborted, and the abort is
+	 * recorded in the appropriate SMMU_(*_)GERROR bit. Completion of this
+	 * Update guarantees that no new MSI writes or wired edge events from
+	 * source x become visible until the source is re-enabled.
+	 */
+	ret = arm_smmu_disable_irqs(smmu);
 	if (ret) {
 		dev_err(smmu->dev, "failed to disable irqs\n");
 		return ret;
@@ -4785,15 +4826,6 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
 	} else
 		arm_smmu_setup_unique_irqs(smmu);
 
-	if (smmu->features & ARM_SMMU_FEAT_PRI)
-		irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
-
-	/* Enable interrupt generation on the SMMU */
-	ret = arm_smmu_write_reg_sync(smmu, irqen_flags,
-				      ARM_SMMU_IRQ_CTRL, ARM_SMMU_IRQ_CTRLACK);
-	if (ret)
-		dev_warn(smmu->dev, "failed to enable irqs\n");
-
 	return 0;
 }
 
@@ -4841,7 +4873,7 @@ static void arm_smmu_write_strtab(struct arm_smmu_device *smmu)
 	writel_relaxed(reg, smmu->base + ARM_SMMU_STRTAB_BASE_CFG);
 }
 
-static int arm_smmu_device_reset(struct arm_smmu_device *smmu)
+static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool resume)
 {
 	int ret;
 	u32 reg, enables;
@@ -4943,12 +4975,17 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu)
 		}
 	}
 
-	ret = arm_smmu_setup_irqs(smmu);
-	if (ret) {
-		dev_err(smmu->dev, "failed to setup irqs\n");
-		return ret;
+	if (!resume) {
+		ret = arm_smmu_setup_irqs(smmu);
+		if (ret) {
+			dev_err(smmu->dev, "failed to setup irqs\n");
+			return ret;
+		}
 	}
 
+	/* Enable interrupt generation on the SMMU */
+	arm_smmu_enable_irqs(smmu);
+
 	if (is_kdump_kernel())
 		enables &= ~(CR0_EVTQEN | CR0_PRIQEN);
 
@@ -5594,7 +5631,7 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
 	arm_smmu_rmr_install_bypass_ste(smmu);
 
 	/* Reset the device */
-	ret = arm_smmu_device_reset(smmu);
+	ret = arm_smmu_device_reset(smmu, false);
 	if (ret) {
 		arm_smmu_device_disable(smmu);
 		return ret;
-- 
2.55.0.979.g7e5102b832-goog



  reply	other threads:[~2026-09-08 17:17 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-08 17:16 [PATCH v10 00/15] iommu/arm-smmu-v3: Implement Runtime/System Sleep ops Pranjal Shrivastava
2026-09-08 17:16 ` Pranjal Shrivastava [this message]
2026-09-08 17:16 ` [PATCH v10 02/15] iommu/arm-smmu-v3: Add Q_POS() macro Pranjal Shrivastava
2026-09-08 17:16 ` [PATCH v10 03/15] iommu/arm-smmu-v3: Add arm_smmu_drain_queue() helper Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 04/15] iommu/tegra241-cmdqv: Add a helper to drain VCMDQs Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 05/15] iommu/arm-smmu-v3: Add a helper to drain cmd queues Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 06/15] iommu/tegra241-cmdqv: Restore PROD and CONS after resume Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 07/15] platform-msi: Introduce platform_device_msi_rewrite() Pranjal Shrivastava
2026-09-08 19:40   ` Thomas Gleixner
2026-09-08 20:15     ` Pranjal Shrivastava
2026-09-08 20:16       ` Pranjal Shrivastava
2026-09-09  9:20       ` Thomas Gleixner
2026-09-08 22:55     ` Jason Gunthorpe
2026-09-08 17:17 ` [PATCH v10 08/15] iommu/arm-smmu-v3: Cache and restore MSI config Pranjal Shrivastava
2026-09-08 19:56   ` Thomas Gleixner
2026-09-08 20:23     ` Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 09/15] iommu/arm-smmu-v3: Factor out arm_smmu_handle_gerror() Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 10/15] iommu/arm-smmu-v3: Add CMDQ_PROD_STOP_FLAG to gate CMDQ submissions Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 11/15] iommu/tegra241-cmdqv: Add a helper to quiesce VCMDQs Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 12/15] iommu/arm-smmu-v3: Implement pm_runtime & system sleep ops Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 13/15] iommu/arm-smmu-v3: Enable pm_runtime and setup devlinks Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 14/15] iommu/arm-smmu-v3: Invoke pm_runtime before hw access Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 15/15] iommu/arm-smmu-v3: Add KUnit unit tests for Runtime PM Pranjal Shrivastava

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260908171712.356645-2-praan@google.com \
    --to=praan@google.com \
    --cc=amhetre@nvidia.com \
    --cc=dakr@kernel.org \
    --cc=danielmentz@google.com \
    --cc=driver-core@lists.linux.dev \
    --cc=gregkh@linuxfoundation.org \
    --cc=iommu@lists.linux.dev \
    --cc=jgg@nvidia.com \
    --cc=jgg@ziepe.ca \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=nicolinc@nvidia.com \
    --cc=rafael@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=smostafa@google.com \
    --cc=tglx@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.