All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Fan Wu <fanwu01@zju.edu.cn>,
	Sebastian Reichel <sebastian.reichel@collabora.com>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.15.y 2/2] power: supply: charger-manager: register regulators before exposing sysfs
Date: Wed,  9 Sep 2026 07:03:52 -0400	[thread overview]
Message-ID: <20260909110352.1705903-2-sashal@kernel.org> (raw)
In-Reply-To: <20260909110352.1705903-1-sashal@kernel.org>

From: Fan Wu <fanwu01@zju.edu.cn>

[ Upstream commit c57cb36f76eb7ced45f57af1a890d8f3a6d76342 ]

charger_manager_remove() and the err_reg_extcon probe error path free each
charger regulator with regulator_put() before tearing down the power_supply
sysfs entries (power_supply_unregister()). charger_manager_remove() also
calls try_charger_enable(cm, false) after the regulator_put() loop. A
concurrent write to a charger's externally_control sysfs attribute that
lands between regulator_put() and power_supply_unregister() can run
charger_externally_control_store() and call try_charger_enable(), which,
when charging is enabled, dereferences the already-freed consumer handle.
When charging is enabled, try_charger_enable(cm, false) in .remove() also
dereferences the freed handles directly. Both leave use-after-free windows.
Symmetrically, probe registers the sysfs entries (power_supply_register)
before acquiring the regulators (regulator_get, inside
charger_manager_register_extcon), so userspace can reach externally_control
before the regulators are available.

Split charger_manager_register_extcon() on the sync/async boundary:
charger_manager_get_regulators() (regulator_get only, no async producer)
now runs before power_supply_register() so sysfs is not live before
regulators are available, and charger_manager_register_extcon() keeps only
the extcon notifier/work setup, still after power_supply_register() so a
power_supply_register() failure cannot reach extcon setup. This keeps the
sysfs setup/teardown ordering symmetric without introducing an asynchronous
producer on the earlier probe-error path.

Move power_supply_unregister() and try_charger_enable(cm, false) ahead of
the regulator_put() loop on both teardown paths, and adjust err_reg_extcon
(power_supply_unregister() then fall through err_regulator for
regulator_put(); get_regulators self-rolls back on its own failure).

This does not address the separate extcon-notifier-driven deref of the same
handles, which needs its own synchronization design.

Found by an in-house static analysis tool.

Fixes: 3950c7865cd7 ("charger-manager: Add support sysfs entry for charger")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260728030123.230202-1-fanwu01@zju.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/charger-manager.c | 54 +++++++++++++++++++-------
 1 file changed, 39 insertions(+), 15 deletions(-)

diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index a20e7aaffbaa8..7f7ddecf2250b 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -1017,6 +1017,29 @@ static int charger_extcon_init(struct charger_manager *cm,
 	return 0;
 }
 
+static int charger_manager_get_regulators(struct charger_manager *cm)
+{
+	struct charger_desc *desc = cm->desc;
+	struct charger_regulator *charger;
+	int i, ret;
+
+	for (i = 0; i < desc->num_charger_regulators; i++) {
+		charger = &desc->charger_regulators[i];
+		charger->consumer = regulator_get(cm->dev,
+						  charger->regulator_name);
+		if (IS_ERR(charger->consumer)) {
+			dev_err(cm->dev, "Cannot find charger(%s)\n",
+				charger->regulator_name);
+			ret = PTR_ERR(charger->consumer);
+			while (i-- > 0)
+				regulator_put(desc->charger_regulators[i].consumer);
+			return ret;
+		}
+		charger->cm = cm;
+	}
+	return 0;
+}
+
 /**
  * charger_manager_register_extcon - Register extcon device to receive state
  *				     of charger cable.
@@ -1039,15 +1062,6 @@ static int charger_manager_register_extcon(struct charger_manager *cm)
 	for (i = 0; i < desc->num_charger_regulators; i++) {
 		charger = &desc->charger_regulators[i];
 
-		charger->consumer = regulator_get(cm->dev,
-					charger->regulator_name);
-		if (IS_ERR(charger->consumer)) {
-			dev_err(cm->dev, "Cannot find charger(%s)\n",
-				charger->regulator_name);
-			return PTR_ERR(charger->consumer);
-		}
-		charger->cm = cm;
-
 		for (j = 0; j < charger->num_cables; j++) {
 			struct charger_cable *cable = &charger->cables[j];
 
@@ -1582,13 +1596,23 @@ static int charger_manager_probe(struct platform_device *pdev)
 	}
 	psy_cfg.attr_grp = desc->sysfs_groups;
 
+	/*
+	 * Acquire charger regulators before exposing the sysfs entries, so
+	 * userspace cannot reach externally_control before the regulators
+	 * (and charger->cm) are available.  Mirrors the order in remove().
+	 */
+	ret = charger_manager_get_regulators(cm);
+	if (ret < 0)
+		return ret;
+
 	cm->charger_psy = power_supply_register(&pdev->dev,
 						&cm->charger_psy_desc,
 						&psy_cfg);
 	if (IS_ERR(cm->charger_psy)) {
 		dev_err(&pdev->dev, "Cannot register charger-manager with name \"%s\"\n",
 			cm->charger_psy_desc.name);
-		return PTR_ERR(cm->charger_psy);
+		ret = PTR_ERR(cm->charger_psy);
+		goto err_regulator;
 	}
 
 	/* Register extcon device for charger cable */
@@ -1622,11 +1646,11 @@ static int charger_manager_probe(struct platform_device *pdev)
 	return 0;
 
 err_reg_extcon:
+	power_supply_unregister(cm->charger_psy);
+err_regulator:
 	for (i = 0; i < desc->num_charger_regulators; i++)
 		regulator_put(desc->charger_regulators[i].consumer);
 
-	power_supply_unregister(cm->charger_psy);
-
 	return ret;
 }
 
@@ -1644,12 +1668,12 @@ static void charger_manager_remove(struct platform_device *pdev)
 	cancel_work_sync(&setup_polling);
 	cancel_delayed_work_sync(&cm_monitor_work);
 
-	for (i = 0 ; i < desc->num_charger_regulators ; i++)
-		regulator_put(desc->charger_regulators[i].consumer);
+	try_charger_enable(cm, false);
 
 	power_supply_unregister(cm->charger_psy);
 
-	try_charger_enable(cm, false);
+	for (i = 0 ; i < desc->num_charger_regulators ; i++)
+		regulator_put(desc->charger_regulators[i].consumer);
 }
 
 static const struct platform_device_id charger_manager_id[] = {
-- 
2.53.0


      reply	other threads:[~2026-09-09 11:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-03 14:38 FAILED: patch "[PATCH] power: supply: charger-manager: register regulators before" failed to apply to 5.15-stable tree gregkh
2026-09-09 11:03 ` [PATCH 5.15.y 1/2] power: supply: charger-manager: Convert to platform remove callback returning void Sasha Levin
2026-09-09 11:03   ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260909110352.1705903-2-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=fanwu01@zju.edu.cn \
    --cc=sebastian.reichel@collabora.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.