From: <gregkh@linuxfoundation.org>
To: peter.ujfalusi@linux.intel.com,broonie@kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] ASoC: pcm512x: sort the register default table" failed to apply to 5.10-stable tree
Date: Wed, 09 Sep 2026 12:03:37 +0200 [thread overview]
Message-ID: <2026090937-awry-woven-fb0a@gregkh> (raw)
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 767d9ae714e3e9b0ae86237c410fbfca7056570a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090937-awry-woven-fb0a@gregkh' --subject-prefix 'PATCH 5.10.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 767d9ae714e3e9b0ae86237c410fbfca7056570a Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Date: Wed, 5 Aug 2026 13:41:45 +0300
Subject: [PATCH] ASoC: pcm512x: sort the register default table
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352ba1 ("regcache: Add support for sorting defaults arrays").
PCM512x_AUTO_MUTE (page 0, register 59) is listed before
PCM512x_ERROR_DETECT (page 0, register 37) and PCM512x_VCOM_CTRL_2
(page 1, register 9) is listed before the page 0 clocking block, so the
bsearch() descends into the wrong half of the table. 24 of the 45
entries are unreachable, among them every PLL coefficient and clock
divider default. regcache_reg_needs_sync() then cannot compare them
against their default and reports that a sync is needed, so they are
written to the device on every regcache_sync() even when they were
never touched.
Sort the table by register address.
Fixes: 5a3af1293194 ("ASoC: pcm512x: Add PCM512x driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805104149.9795-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c
index fe3b5011fa16..03b1fcb1bf96 100644
--- a/sound/soc/codecs/pcm512x.c
+++ b/sound/soc/codecs/pcm512x.c
@@ -78,28 +78,10 @@ static const struct reg_default pcm512x_reg_defaults[] = {
{ PCM512x_POWER, 0x00 },
{ PCM512x_MUTE, 0x00 },
{ PCM512x_DSP, 0x00 },
- { PCM512x_PLL_REF, 0x00 },
- { PCM512x_DAC_REF, 0x00 },
- { PCM512x_DAC_ROUTING, 0x11 },
- { PCM512x_DSP_PROGRAM, 0x01 },
- { PCM512x_CLKDET, 0x00 },
- { PCM512x_AUTO_MUTE, 0x00 },
- { PCM512x_ERROR_DETECT, 0x00 },
- { PCM512x_DIGITAL_VOLUME_1, 0x00 },
- { PCM512x_DIGITAL_VOLUME_2, 0x30 },
- { PCM512x_DIGITAL_VOLUME_3, 0x30 },
- { PCM512x_DIGITAL_MUTE_1, 0x22 },
- { PCM512x_DIGITAL_MUTE_2, 0x00 },
- { PCM512x_DIGITAL_MUTE_3, 0x07 },
- { PCM512x_OUTPUT_AMPLITUDE, 0x00 },
- { PCM512x_ANALOG_GAIN_CTRL, 0x00 },
- { PCM512x_UNDERVOLTAGE_PROT, 0x00 },
- { PCM512x_ANALOG_MUTE_CTRL, 0x00 },
- { PCM512x_ANALOG_GAIN_BOOST, 0x00 },
- { PCM512x_VCOM_CTRL_1, 0x00 },
- { PCM512x_VCOM_CTRL_2, 0x01 },
{ PCM512x_BCLK_LRCLK_CFG, 0x00 },
{ PCM512x_MASTER_MODE, 0x7c },
+ { PCM512x_PLL_REF, 0x00 },
+ { PCM512x_DAC_REF, 0x00 },
{ PCM512x_GPIO_DACIN, 0x00 },
{ PCM512x_GPIO_PLLIN, 0x00 },
{ PCM512x_SYNCHRONIZE, 0x10 },
@@ -117,8 +99,26 @@ static const struct reg_default pcm512x_reg_defaults[] = {
{ PCM512x_FS_SPEED_MODE, 0x00 },
{ PCM512x_IDAC_1, 0x01 },
{ PCM512x_IDAC_2, 0x00 },
+ { PCM512x_ERROR_DETECT, 0x00 },
{ PCM512x_I2S_1, 0x02 },
{ PCM512x_I2S_2, 0x00 },
+ { PCM512x_DAC_ROUTING, 0x11 },
+ { PCM512x_DSP_PROGRAM, 0x01 },
+ { PCM512x_CLKDET, 0x00 },
+ { PCM512x_AUTO_MUTE, 0x00 },
+ { PCM512x_DIGITAL_VOLUME_1, 0x00 },
+ { PCM512x_DIGITAL_VOLUME_2, 0x30 },
+ { PCM512x_DIGITAL_VOLUME_3, 0x30 },
+ { PCM512x_DIGITAL_MUTE_1, 0x22 },
+ { PCM512x_DIGITAL_MUTE_2, 0x00 },
+ { PCM512x_DIGITAL_MUTE_3, 0x07 },
+ { PCM512x_OUTPUT_AMPLITUDE, 0x00 },
+ { PCM512x_ANALOG_GAIN_CTRL, 0x00 },
+ { PCM512x_UNDERVOLTAGE_PROT, 0x00 },
+ { PCM512x_ANALOG_MUTE_CTRL, 0x00 },
+ { PCM512x_ANALOG_GAIN_BOOST, 0x00 },
+ { PCM512x_VCOM_CTRL_1, 0x00 },
+ { PCM512x_VCOM_CTRL_2, 0x01 },
};
static bool pcm512x_readable(struct device *dev, unsigned int reg)
next reply other threads:[~2026-09-09 10:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-09 10:03 gregkh [this message]
2026-09-11 1:43 ` [PATCH 5.10.y 1/2] ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers Sasha Levin
2026-09-11 1:43 ` [PATCH 5.10.y 2/2] ASoC: pcm512x: sort the register default table Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026090937-awry-woven-fb0a@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=broonie@kernel.org \
--cc=peter.ujfalusi@linux.intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.