All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: njavali@marvell.com,mkp@kernel.org,sashiko-dev@google.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] scsi: qla2xxx: Fix soft lockup polling continuation IOCB" failed to apply to 5.15-stable tree
Date: Wed, 09 Sep 2026 13:19:58 +0200	[thread overview]
Message-ID: <2026090958-lucrative-hydroxide-cdb1@gregkh> (raw)


The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x d7e3fa7d06bf7fcaac186d3c4d635caac166d36c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090958-lucrative-hydroxide-cdb1@gregkh' --subject-prefix 'PATCH 5.15.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From d7e3fa7d06bf7fcaac186d3c4d635caac166d36c Mon Sep 17 00:00:00 2001
From: Nilesh Javali <njavali@marvell.com>
Date: Thu, 30 Jul 2026 21:28:19 +0530
Subject: [PATCH] scsi: qla2xxx: Fix soft lockup polling continuation IOCB
 signature

qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll
rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide
whether the next continuation IOCB has arrived, spinning on cpu_relax()
without advancing the ring or decrementing the entry count while it has
not. response_t::signature lives at byte offset 60, but a continuation
IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame
payload at that offset (data[56..59]). A received frame whose payload
bytes happen to equal 0xDEADDEAD is therefore misread as "not yet
arrived", and the loop spins forever in interrupt/DPC context, causing a
CPU soft lockup.

The poll is also unnecessary: callers of qla27xx_copy_multiple_pkt()
(PT_LS4_UNSOL and the NVMe purls path) already gate on
qla_chk_cont_iocb_avail(), which guarantees all entry_count IOCBs are
present before copying begins. The sibling helper
__qla_copy_purex_to_buffer() already drops the signature poll and relies
on the entry_type == STATUS_CONT_TYPE guard instead.

Remove the signature busy-wait from both helpers, keeping the entry_type
guard, and gate the FPIN path with qla_chk_cont_iocb_avail() so it defers
and re-processes on the next interrupt once all continuation IOCBs have
arrived, mirroring the ELS_AUTH_ELS and PT_LS4_UNSOL arms. With this the
signature field is never read on a continuation IOCB, eliminating the
payload-aliasing lockup.

Fixes: 9f2475fe7406 ("scsi: qla2xxx: SAN congestion management implementation")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-15-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 6375c18fe392..d9019f2b059c 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1002,14 +1002,6 @@ qla27xx_copy_multiple_pkt(struct scsi_qla_host *vha, void **pkt,
 
 	do {
 		while ((total_bytes > 0) && (entry_count_remaining > 0)) {
-			if (rsp_q->ring_ptr->signature == RESPONSE_PROCESSED) {
-				ql_dbg(ql_dbg_async, vha, 0x5084,
-				       "Ran out of IOCBs, partial data 0x%x\n",
-				       buffer_copy_offset);
-				cpu_relax();
-				continue;
-			}
-
 			*pkt = rsp_q->ring_ptr;
 			data = ((sts_cont_entry_t *)*pkt)->data;
 			data_sz = qla_sts_cont_data_size(ha);
@@ -1299,14 +1291,6 @@ qla27xx_copy_fpin_pkt(struct scsi_qla_host *vha, void **pkt,
 
 	do {
 		while ((total_bytes > 0) && (entry_count_remaining > 0)) {
-			if (rsp_q->ring_ptr->signature == RESPONSE_PROCESSED) {
-				ql_dbg(ql_dbg_async, vha, 0x5084,
-				       "Ran out of IOCBs, partial data 0x%x\n",
-				       buffer_copy_offset);
-				cpu_relax();
-				continue;
-			}
-
 			*pkt = rsp_q->ring_ptr;
 			data = ((sts_cont_entry_t *)*pkt)->data;
 			data_sz = qla_sts_cont_data_size(ha);
@@ -4272,9 +4256,24 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
 					       "SCM not active for this port\n");
 					break;
 				}
+				if (qla_chk_cont_iocb_avail(vha, rsp,
+				    (response_t *)pkt, rsp_in)) {
+					/*
+					 * ring_ptr and ring_index were
+					 * pre-incremented above. Reset them
+					 * back to current. Wait for next
+					 * interrupt with all IOCBs to arrive
+					 * and re-process.
+					 */
+					qla_rsp_ring_rewind_to(rsp,
+					    (response_t *)pkt, cur_ring_index);
+
+					ql_dbg(ql_dbg_init, vha, 0x5095,
+					    "Defer processing FPIN...\n");
+					return;
+				}
 				pure_item = qla27xx_copy_fpin_pkt(vha,
 							  (void **)&pkt, &rsp);
-				__update_rsp_in(is_shadow_hba, rsp, rsp_in);
 				if (!pure_item)
 					break;
 				qla24xx_queue_purex_item(vha, pure_item,


             reply	other threads:[~2026-09-09 11:27 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-09 11:19 gregkh [this message]
2026-09-11 21:15 ` [PATCH 5.15.y] scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2026090958-lucrative-hydroxide-cdb1@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=mkp@kernel.org \
    --cc=njavali@marvell.com \
    --cc=sashiko-dev@google.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.