[PATCH 6/7] pinctrl: sunxi: a523-r: add a733-r compatible string

[Andre Przywara <andre.przywara@arm.com>]

The secondary Allwinner A733 pincontroller ("-r") is interestingly not
using the same new MMIO frame layout as the main controller, but is in
fact very similar to the A523-r one: it has two banks, with 14 and 6 pins
each. From the driver's perspective, this is all we care about, so we can
re-use the a523-r pinctrl driver for the a733-r, too.

The individual pinmux settings are different, so we must not use the
a523-r compatible string as a fallback, but we can surely let the same
driver care for both the a523-r and a733-r IP, as the pinmux values will
be provided by the DT.

Add the a733-r compatible string to the match list, without further
distinguishing between the two. Should differences be discovered later,
we can easily split this up then.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/pinctrl/sunxi/pinctrl-sun55i-a523-r.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun55i-a523-r.c b/drivers/pinctrl/sunxi/pinctrl-sun55i-a523-r.c
index 9e07fbb5be7cb..dfdcfa740ecc9 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun55i-a523-r.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun55i-a523-r.c
@@ -40,6 +40,7 @@ static int a523_r_pinctrl_probe(struct platform_device *pdev)
 
 static const struct of_device_id a523_r_pinctrl_match[] = {
 	{ .compatible = "allwinner,sun55i-a523-r-pinctrl", },
+	{ .compatible = "allwinner,sun60i-a733-r-pinctrl", },
 	{}
 };
 
-- 
2.47.3