[PATCH] drivers: net: smsc: Remove unused smc9194.h header

[Ethan Nelson-Moore <enelsonmoore@gmail.com>]

The smc9194 driver was removed in commit 9fdf9f61fa6d ("drivers: net:
smsc: smc9194: Remove this driver"), but smc9194.h was left behind.
Remove it.

Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
---
 drivers/net/ethernet/smsc/smc9194.h | 241 ----------------------------
 1 file changed, 241 deletions(-)
 delete mode 100644 drivers/net/ethernet/smsc/smc9194.h

diff --git a/drivers/net/ethernet/smsc/smc9194.h b/drivers/net/ethernet/smsc/smc9194.h
deleted file mode 100644
index cf69d0a5a1cb..000000000000
--- a/drivers/net/ethernet/smsc/smc9194.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*------------------------------------------------------------------------
- . smc9194.h
- . Copyright (C) 1996 by Erik Stahlman
- .
- . This software may be used and distributed according to the terms
- . of the GNU General Public License, incorporated herein by reference.
- .
- . This file contains register information and access macros for
- . the SMC91xxx chipset.
- .
- . Information contained in this file was obtained from the SMC91C94
- . manual from SMC.  To get a copy, if you really want one, you can find
- . information under www.smc.com in the components division.
- . ( this thanks to advice from Donald Becker ).
- .
- . Authors
- . 	Erik Stahlman				( erik@vt.edu )
- .
- . History
- . 01/06/96		 Erik Stahlman   moved definitions here from main .c file
- . 01/19/96		 Erik Stahlman	  polished this up some, and added better
- .										  error handling
- .
- ---------------------------------------------------------------------------*/
-#ifndef _SMC9194_H_
-#define _SMC9194_H_
-
-/* I want some simple types */
-
-typedef unsigned char			byte;
-typedef unsigned short			word;
-typedef unsigned long int 		dword;
-
-
-/* Because of bank switching, the SMC91xxx uses only 16 I/O ports */
-
-#define SMC_IO_EXTENT	16
-
-
-/*---------------------------------------------------------------
- .
- . A description of the SMC registers is probably in order here,
- . although for details, the SMC datasheet is invaluable.
- .
- . Basically, the chip has 4 banks of registers ( 0 to 3 ), which
- . are accessed by writing a number into the BANK_SELECT register
- . ( I also use a SMC_SELECT_BANK macro for this ).
- .
- . The banks are configured so that for most purposes, bank 2 is all
- . that is needed for simple run time tasks.
- -----------------------------------------------------------------------*/
-
-/*
- . Bank Select Register:
- .
- .		yyyy yyyy 0000 00xx
- .		xx 		= bank number
- .		yyyy yyyy	= 0x33, for identification purposes.
-*/
-#define	BANK_SELECT		14
-
-/* BANK 0  */
-
-#define	TCR 		0    	/* transmit control register */
-#define TCR_ENABLE	0x0001	/* if this is 1, we can transmit */
-#define TCR_FDUPLX    	0x0800  /* receive packets sent out */
-#define TCR_STP_SQET	0x1000	/* stop transmitting if Signal quality error */
-#define	TCR_MON_CNS	0x0400	/* monitors the carrier status */
-#define	TCR_PAD_ENABLE	0x0080	/* pads short packets to 64 bytes */
-
-#define	TCR_CLEAR	0	/* do NOTHING */
-/* the normal settings for the TCR register : */
-/* QUESTION: do I want to enable padding of short packets ? */
-#define	TCR_NORMAL  	TCR_ENABLE
-
-
-#define EPH_STATUS	2
-#define ES_LINK_OK	0x4000	/* is the link integrity ok ? */
-
-#define	RCR		4
-#define RCR_SOFTRESET	0x8000 	/* resets the chip */
-#define	RCR_STRIP_CRC	0x200	/* strips CRC */
-#define RCR_ENABLE	0x100	/* IFF this is set, we can receive packets */
-#define RCR_ALMUL	0x4 	/* receive all multicast packets */
-#define	RCR_PROMISC	0x2	/* enable promiscuous mode */
-
-/* the normal settings for the RCR register : */
-#define	RCR_NORMAL	(RCR_STRIP_CRC | RCR_ENABLE)
-#define RCR_CLEAR	0x0		/* set it to a base state */
-
-#define	COUNTER		6
-#define	MIR		8
-#define	MCR		10
-/* 12 is reserved */
-
-/* BANK 1 */
-#define CONFIG			0
-#define CFG_AUI_SELECT	 	0x100
-#define	BASE			2
-#define	ADDR0			4
-#define	ADDR1			6
-#define	ADDR2			8
-#define	GENERAL			10
-#define	CONTROL			12
-#define	CTL_POWERDOWN		0x2000
-#define	CTL_LE_ENABLE		0x80
-#define	CTL_CR_ENABLE		0x40
-#define	CTL_TE_ENABLE		0x0020
-#define CTL_AUTO_RELEASE	0x0800
-#define	CTL_EPROM_ACCESS	0x0003 /* high if Eprom is being read */
-
-/* BANK 2 */
-#define MMU_CMD		0
-#define MC_BUSY		1	/* only readable bit in the register */
-#define MC_NOP		0
-#define	MC_ALLOC	0x20  	/* or with number of 256 byte packets */
-#define	MC_RESET	0x40
-#define	MC_REMOVE	0x60  	/* remove the current rx packet */
-#define MC_RELEASE  	0x80  	/* remove and release the current rx packet */
-#define MC_FREEPKT  	0xA0  	/* Release packet in PNR register */
-#define MC_ENQUEUE	0xC0 	/* Enqueue the packet for transmit */
-
-#define	PNR_ARR		2
-#define FIFO_PORTS	4
-
-#define FP_RXEMPTY  0x8000
-#define FP_TXEMPTY  0x80
-
-#define	POINTER		6
-#define PTR_READ	0x2000
-#define	PTR_RCV		0x8000
-#define	PTR_AUTOINC 	0x4000
-#define PTR_AUTO_INC	0x0040
-
-#define	DATA_1		8
-#define	DATA_2		10
-#define	INTERRUPT	12
-
-#define INT_MASK	13
-#define IM_RCV_INT	0x1
-#define	IM_TX_INT	0x2
-#define	IM_TX_EMPTY_INT	0x4
-#define	IM_ALLOC_INT	0x8
-#define	IM_RX_OVRN_INT	0x10
-#define	IM_EPH_INT	0x20
-#define	IM_ERCV_INT	0x40 /* not on SMC9192 */
-
-/* BANK 3 */
-#define	MULTICAST1	0
-#define	MULTICAST2	2
-#define	MULTICAST3	4
-#define	MULTICAST4	6
-#define	MGMT		8
-#define	REVISION	10 /* ( hi: chip id   low: rev # ) */
-
-
-/* this is NOT on SMC9192 */
-#define	ERCV		12
-
-#define CHIP_9190	3
-#define CHIP_9194	4
-#define CHIP_9195	5
-#define CHIP_91100	7
-
-static const char * chip_ids[ 15 ] =  {
-	NULL, NULL, NULL,
-	/* 3 */ "SMC91C90/91C92",
-	/* 4 */ "SMC91C94",
-	/* 5 */ "SMC91C95",
-	NULL,
-	/* 7 */ "SMC91C100",
-	/* 8 */ "SMC91C100FD",
-	NULL, NULL, NULL,
-	NULL, NULL, NULL};
-
-/*
- . Transmit status bits
-*/
-#define TS_SUCCESS 0x0001
-#define TS_LOSTCAR 0x0400
-#define TS_LATCOL  0x0200
-#define TS_16COL   0x0010
-
-/*
- . Receive status bits
-*/
-#define RS_ALGNERR	0x8000
-#define RS_BADCRC	0x2000
-#define RS_ODDFRAME	0x1000
-#define RS_TOOLONG	0x0800
-#define RS_TOOSHORT	0x0400
-#define RS_MULTICAST	0x0001
-#define RS_ERRORS	(RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
-
-static const char * interfaces[ 2 ] = { "TP", "AUI" };
-
-/*-------------------------------------------------------------------------
- .  I define some macros to make it easier to do somewhat common
- . or slightly complicated, repeated tasks.
- --------------------------------------------------------------------------*/
-
-/* select a register bank, 0 to 3  */
-
-#define SMC_SELECT_BANK(x)  { outw( x, ioaddr + BANK_SELECT ); }
-
-/* define a small delay for the reset */
-#define SMC_DELAY() { inw( ioaddr + RCR );\
-			inw( ioaddr + RCR );\
-			inw( ioaddr + RCR );  }
-
-/* this enables an interrupt in the interrupt mask register */
-#define SMC_ENABLE_INT(x) {\
-		unsigned char mask;\
-		SMC_SELECT_BANK(2);\
-		mask = inb( ioaddr + INT_MASK );\
-		mask |= (x);\
-		outb( mask, ioaddr + INT_MASK ); \
-}
-
-/* this disables an interrupt from the interrupt mask register */
-
-#define SMC_DISABLE_INT(x) {\
-		unsigned char mask;\
-		SMC_SELECT_BANK(2);\
-		mask = inb( ioaddr + INT_MASK );\
-		mask &= ~(x);\
-		outb( mask, ioaddr + INT_MASK ); \
-}
-
-/*----------------------------------------------------------------------
- . Define the interrupts that I want to receive from the card
- .
- . I want:
- .  IM_EPH_INT, for nasty errors
- .  IM_RCV_INT, for happy received packets
- .  IM_RX_OVRN_INT, because I have to kick the receiver
- --------------------------------------------------------------------------*/
-#define SMC_INTERRUPT_MASK   (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT)
-
-#endif  /* _SMC_9194_H_ */
-
-- 
2.43.0