From: Niklas Cassel <cassel@kernel.org>
To: Patrice Chotard <patrice.chotard@foss.st.com>,
Damien Le Moal <dlemoal@kernel.org>,
Niklas Cassel <cassel@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>, Tejun Heo <tj@kernel.org>,
Alexandre Torgue <alexandre.torgue@st.com>,
Lee Jones <lee@kernel.org>
Cc: Brian Norris <computersforpeace@gmail.com>,
stable@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-ide@vger.kernel.org
Subject: [PATCH v4 1/5] ata: ahci_st: Assert the power down reset in the probe() error path
Date: Thu, 10 Sep 2026 19:14:07 +0200 [thread overview]
Message-ID: <20260910171406.131211-8-cassel@kernel.org> (raw)
In-Reply-To: <20260910171406.131211-7-cassel@kernel.org>
st_ahci_probe_resets() deasserts the "pwr-dwn" reset, but the probe()
error path of st_ahci_probe() only releases the host resources, so the
SATA IP is left powered up when probe() fails after
st_ahci_probe_resets() has succeeded, e.g. when
ahci_platform_enable_resources() fails.
The reset is asserted by st_ahci_host_stop(), however ->host_stop() is
only called through the ata_host_stop() devres action registered by
ata_host_start(), so it does not cover any failure happening before the
host has been started.
Factor the assert out into st_ahci_assert_pwrdwn() and call it from both
probe() error paths. The "pwr-dwn" reset control is an exclusive one, so
asserting it once more from st_ahci_host_stop() is harmless.
No functional change intended for ->host_stop() and st_ahci_suspend().
Fixes: 76884cb2f7da ("ahci: st: Add support for ST's SATA IP")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
---
drivers/ata/ahci_st.c | 51 +++++++++++++++++++++++++------------------
1 file changed, 30 insertions(+), 21 deletions(-)
diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c
index 4336c8a6e208..39ebedf93344 100644
--- a/drivers/ata/ahci_st.c
+++ b/drivers/ata/ahci_st.c
@@ -83,18 +83,27 @@ static int st_ahci_deassert_resets(struct ahci_host_priv *hpriv,
return 0;
}
-static void st_ahci_host_stop(struct ata_host *host)
+static int st_ahci_assert_pwrdwn(struct ahci_host_priv *hpriv,
+ struct device *dev)
{
- struct ahci_host_priv *hpriv = host->private_data;
struct st_ahci_drv_data *drv_data = hpriv->plat_data;
- struct device *dev = host->dev;
int err;
- if (drv_data->pwr) {
- err = reset_control_assert(drv_data->pwr);
- if (err)
- dev_err(dev, "unable to pwrdwn\n");
- }
+ if (!drv_data->pwr)
+ return 0;
+
+ err = reset_control_assert(drv_data->pwr);
+ if (err)
+ dev_err(dev, "unable to pwrdwn\n");
+
+ return err;
+}
+
+static void st_ahci_host_stop(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+
+ st_ahci_assert_pwrdwn(hpriv, host->dev);
ahci_platform_disable_resources(hpriv);
}
@@ -162,38 +171,38 @@ static int st_ahci_probe(struct platform_device *pdev)
err = ahci_platform_enable_resources(hpriv);
if (err)
- return err;
+ goto assert_pwrdwn;
st_ahci_configure_oob(hpriv->mmio);
err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info,
&ahci_platform_sht);
- if (err) {
- ahci_platform_disable_resources(hpriv);
- return err;
- }
+ if (err)
+ goto disable_resources;
return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+assert_pwrdwn:
+ st_ahci_assert_pwrdwn(hpriv, &pdev->dev);
+
+ return err;
}
static int st_ahci_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
- struct st_ahci_drv_data *drv_data = hpriv->plat_data;
int err;
err = ahci_platform_suspend_host(dev);
if (err)
return err;
- if (drv_data->pwr) {
- err = reset_control_assert(drv_data->pwr);
- if (err) {
- dev_err(dev, "unable to pwrdwn");
- return err;
- }
- }
+ err = st_ahci_assert_pwrdwn(hpriv, dev);
+ if (err)
+ return err;
ahci_platform_disable_resources(hpriv);
--
2.55.0
next prev parent reply other threads:[~2026-09-10 17:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 17:14 [PATCH v4 0/5] ata: Do not release the host resources twice on probe() failure Niklas Cassel
2026-09-10 17:14 ` Niklas Cassel [this message]
2026-09-10 17:29 ` [PATCH v4 1/5] ata: ahci_st: Assert the power down reset in the probe() error path sashiko-bot
2026-09-10 17:39 ` Niklas Cassel
2026-09-10 17:14 ` [PATCH v4 2/5] ata: sata_fsl: Fix use-after-free of host_priv on probe() failure Niklas Cassel
2026-09-10 17:14 ` [PATCH v4 3/5] ata: libahci: Free the IRQs when activating a multi-IRQ host fails Niklas Cassel
2026-09-10 17:14 ` [PATCH v4 4/5] ata: libata: Do not leave ata_host_stop() registered when activation fails Niklas Cassel
2026-09-10 17:14 ` [PATCH v4 5/5] ata: libata-core: Fix the ata_host_register() kdoc Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260910171406.131211-8-cassel@kernel.org \
--to=cassel@kernel.org \
--cc=alexandre.torgue@st.com \
--cc=computersforpeace@gmail.com \
--cc=dlemoal@kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=patrice.chotard@foss.st.com \
--cc=stable@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.