All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,songmuchun@bytedance.com,akpm@linux-foundation.org
Subject: [to-be-updated] mm-sparse-inline-usemap-allocation-into-sparse_init_nid.patch removed from -mm tree
Date: Thu, 10 Sep 2026 16:00:53 -0700	[thread overview]
Message-ID: <20260910230053.994DA1F000FF@smtp.kernel.org> (raw)


The quilt patch titled
     Subject: mm/sparse: inline usemap allocation into sparse_init_nid()
has been removed from the -mm tree.  Its filename was
     mm-sparse-inline-usemap-allocation-into-sparse_init_nid.patch

This patch was dropped because an updated version will be issued

------------------------------------------------------
From: Muchun Song <songmuchun@bytedance.com>
Subject: mm/sparse: inline usemap allocation into sparse_init_nid()
Date: Tue, 25 Aug 2026 16:46:03 +0800

After removing SPARSEMEM_VMEMMAP_PREINIT, sparse_init_nid() no longer
needs the transient sparse_usagebuf state and its helper wrappers.

Allocate the usemap buffer directly in sparse_init_nid(), pass it to
sparse_init_one_section(), and drop sparse_usage_init(),
sparse_usage_fini(), and sparse_init_early_section().

Link: https://lore.kernel.org/20260825084608.47437-13-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Qi Zheng <qi.zheng@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 include/linux/mmzone.h |    3 --
 mm/sparse.c            |   46 +++++----------------------------------
 2 files changed, 7 insertions(+), 42 deletions(-)

--- a/include/linux/mmzone.h~mm-sparse-inline-usemap-allocation-into-sparse_init_nid
+++ a/include/linux/mmzone.h
@@ -2223,9 +2223,6 @@ static inline bool pfn_section_first_val
 }
 #endif
 
-void sparse_init_early_section(int nid, struct page *map, unsigned long pnum,
-			       unsigned long flags);
-
 #ifndef CONFIG_HAVE_ARCH_PFN_VALID
 /**
  * pfn_valid - check if there is a valid memory map entry for a PFN
--- a/mm/sparse.c~mm-sparse-inline-usemap-allocation-into-sparse_init_nid
+++ a/mm/sparse.c
@@ -235,42 +235,6 @@ void __weak __meminit vmemmap_populate_p
 {
 }
 
-static void *sparse_usagebuf __initdata;
-static void *sparse_usagebuf_end __initdata;
-
-/*
- * Helper function that is used for generic section initialization, and
- * can also be used by any hooks added above.
- */
-void __init sparse_init_early_section(int nid, struct page *map,
-				      unsigned long pnum, unsigned long flags)
-{
-	BUG_ON(!sparse_usagebuf || sparse_usagebuf >= sparse_usagebuf_end);
-	sparse_init_one_section(__nr_to_section(pnum), pnum, map,
-			sparse_usagebuf, SECTION_IS_EARLY | flags);
-	sparse_usagebuf = (void *)sparse_usagebuf + mem_section_usage_size();
-}
-
-static int __init sparse_usage_init(int nid, unsigned long map_count)
-{
-	unsigned long size;
-
-	size = mem_section_usage_size() * map_count;
-	sparse_usagebuf = memblock_alloc_node(size, SMP_CACHE_BYTES, nid);
-	if (!sparse_usagebuf) {
-		sparse_usagebuf_end = NULL;
-		return -ENOMEM;
-	}
-
-	sparse_usagebuf_end = sparse_usagebuf + size;
-	return 0;
-}
-
-static void __init sparse_usage_fini(void)
-{
-	sparse_usagebuf = sparse_usagebuf_end = NULL;
-}
-
 /*
  * Initialize sparse on a specific node. The node spans [pnum_begin, pnum_end)
  * And number of present sections in this node is map_count.
@@ -280,8 +244,11 @@ static void __init sparse_init_nid(int n
 				   unsigned long map_count)
 {
 	unsigned long pnum;
+	struct mem_section_usage *usage;
 
-	if (sparse_usage_init(nid, map_count))
+	usage = memblock_alloc_node(map_count * mem_section_usage_size(),
+				    SMP_CACHE_BYTES, nid);
+	if (!usage)
 		panic("Failed to allocate usemap for node %d\n", nid);
 
 	for_each_present_section_nr(pnum_begin, pnum) {
@@ -297,9 +264,10 @@ static void __init sparse_init_nid(int n
 			panic("Failed to allocate memmap for section %lu\n", pnum);
 		memmap_boot_pages_add(section_nr_vmemmap_pages(pfn, PAGES_PER_SECTION,
 							       NULL, NULL));
-		sparse_init_early_section(nid, map, pnum, 0);
+		sparse_init_one_section(__nr_to_section(pnum), pnum, map, usage,
+					SECTION_IS_EARLY);
+		usage = (void *)usage + mem_section_usage_size();
 	}
-	sparse_usage_fini();
 }
 
 /*
_

Patches currently in -mm which might be from songmuchun@bytedance.com are

mm-sparse-remove-section_map_size.patch
mm-hugetlb-remove-huge_bootmem_hvo.patch
mm-hugetlb-remove-huge_bootmem_cma.patch
mm-hugetlb-localize-struct-huge_bootmem_page.patch
mm-hugetlb-localize-huge_bootmem_zones_valid.patch
mm-sparse-vmemmap-introduce-config_sparsemem_vmemmap_optimization.patch
mm-sparse-vmemmap-factor-out-shared-vmemmap-tail-page-allocation.patch
mm-sparse-vmemmap-open-code-init_compound_tail.patch
mm-sparse-vmemmap-prepare-dax-vmemmap-population-for-section-orders.patch
mm-sparse-vmemmap-set-section-order-for-device-dax.patch
mm-sparse-vmemmap-switch-device-dax-to-shared-tail-vmemmap-pages.patch
mm-sparse-vmemmap-move-hvo-helpers-to-a-public-header.patch
powerpc-mm-switch-device-dax-to-shared-tail-vmemmap-pages.patch
mm-sparse-vmemmap-drop-the-extra-tail-page-from-device-dax-reservation.patch
mm-sparse-vmemmap-drop-unused-section_nr_vmemmap_pages-arguments.patch
documentation-mm-update-dax-vmemmap-deduplication-docs.patch


                 reply	other threads:[~2026-09-10 23:00 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260910230053.994DA1F000FF@smtp.kernel.org \
    --to=akpm@linux-foundation.org \
    --cc=mm-commits@vger.kernel.org \
    --cc=songmuchun@bytedance.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.