Re: [PATCH v3 2/2] usb: chipidea: ci_hdrc_imx: Fix error handling when creating IRQ name

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Mon, Aug 10, 2026 at 04:31:12PM +0700, phucduc.bui@gmail.com wrote:
> From: bui duc phuc <phucduc.bui@gmail.com>
> 
> devm_kasprintf() can fail when allocating the wakeup IRQ name. The error
> was logged with dev_err_probe(), but its return value was ignored and
> probe could continue with a successful return value.
> 
> Store the error returned by dev_err_probe() in ret and jump to the error
> path to propagate the failure.
> 
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Acked-by: Peter Chen <peter.chen@kernel.org>
> Reported-by: Sashiko Bot <sashiko-bot@kernel.org>
> Link: https://lore.kernel.org/all/20260806065755.C9F361F000E9@smtp.kernel.org/
> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
> ---
> 
> Link v2: 
> https://lore.kernel.org/all/20260807065619.30604-2-phucduc.bui@gmail.com/
> Changes in v3:
>  - Use the phy_shutdown label instead of err_clk as suggested by 
>    Sashiko's review. 
>  - Add Peter Chen's Acked-by tag.
>  - Add Frank Li's Reviewed-by tag.
> 
>  drivers/usb/chipidea/ci_hdrc_imx.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index 9e529398c607..edbf9df9b8f2 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -532,8 +532,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  	if (data->wakeup_irq > 0) {
>  		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s:wakeup", pdata.name);
>  		if (!irq_name) {
> -			dev_err_probe(dev, -ENOMEM, "failed to create irq_name\n");
> -			goto err_clk;
> +			ret = dev_err_probe(dev, -ENOMEM, "failed to create irq_name\n");
> +			goto phy_shutdown;
>  		}
>  
>  		ret = devm_request_threaded_irq(dev, data->wakeup_irq,
> @@ -541,7 +541,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  						IRQF_ONESHOT | IRQF_NO_AUTOEN,
>  						irq_name, data);
>  		if (ret)
> -			goto err_clk;
> +			goto phy_shutdown;
>  	}
>  
>  	ret = imx_usbmisc_init(data->usbmisc_data);
> -- 
> 2.43.0
>

This patch did not apply, please rebase and resend.

thanks,
greg k-h