From: Chang Yu <marcus.yu.56@gmail.com>
To: Andy Shevchenko <andy@kernel.org>
Cc: "Chang Yu" <marcus.yu.56@gmail.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>, "Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Shi Hao" <i.shihao.999@gmail.com>,
"Jose A. Perez de Azpillaga" <azpijr@gmail.com>,
"Joshua Crofts" <joshua.crofts1@gmail.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 2/2] iio: light: add AS7343 multi-spectral sensor driver
Date: Fri, 11 Sep 2026 18:39:12 -0700 [thread overview]
Message-ID: <20260912013912.51887-3-marcus.yu.56@gmail.com> (raw)
In-Reply-To: <20260912013912.51887-1-marcus.yu.56@gmail.com>
Add a driver for the AMS AS7343 14-channel multi-spectral sensor.
The AS7343 is a 14-channel spectral sensor featuring 11 visible
channels, 1 near-infrared channel, 1 clear channel (VIS), and 1
flicker detection channel.
The driver exposes 12 spectral channels (11 visible light and 1
near-infrared) via sysfs. Runtime PM is implemented to stop
measurements when the device is suspended or torn down. Power is
never cut (PON=1 always) to preserve register values.
Future patches will add configurable gain and integration time,
interrupt support, buffered reads, VIS channel, and flicker
detection.
Datasheet: https://look.ams-osram.com/m/5f2d27fff9a874d2/original/AS7343-14-Channel-Multi-Spectral-Sensor.pdf
Signed-off-by: Chang Yu <marcus.yu.56@gmail.com>
---
Changes in v4:
- Use REGCACHE_MAPLE and add volatile register table.
- Use PM_RUNTIME_ACQUIRE* when resuming.
- Use a static array for labels.
- Various code style fixes.
Changes in v3:
- Hold a mutex before reading measurements.
- Add pm_runtime_resume_and_get before reading measurements.
- Only start measurements after suspend action has been successfully
registered
- Check the return value of regmap_read when verifying device ID.
Changes in v2:
- Adjust the default gain to x256 and integration time to 50.1ms as
recommended by the datasheet.
- Use read_label instead of .extend
- Remove all unused scan_index related constants.
- Add missing calls to pm_runtime_* methods in probe.
- Fix various code style issues
MAINTAINERS | 1 +
drivers/iio/light/Kconfig | 11 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/as7343.c | 434 +++++++++++++++++++++++++++++++++++++
4 files changed, 447 insertions(+)
create mode 100644 drivers/iio/light/as7343.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 8cf4e1635053..236102b3c28e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1435,6 +1435,7 @@ M: Chang Yu <marcus.yu.56@gmail.com>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/iio/light/ams,as7343.yaml
+F: drivers/iio/light/as7343.c
AMT (Automatic Multicast Tunneling)
M: Taehee Yoo <ap420073@gmail.com>
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index ef36824f312f..edbeeba9d873 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -149,6 +149,17 @@ config AS73211
This driver can also be built as a module. If so, the module
will be called as73211.
+config AS7343
+ tristate "AMS AS7343 14-Channel Multi-Spectral Sensor"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y here to build support for the AMS AS7343 14-channel
+ multi-spectral sensor.
+
+ To compile this driver as a module, choose M here: the module will
+ be called as7343.
+
config BH1745
tristate "ROHM BH1745 colour sensor"
depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 64e354c49ed8..5d0d33802519 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_APDS9306) += apds9306.o
obj-$(CONFIG_APDS9960) += apds9960.o
obj-$(CONFIG_APDS9999) += apds9999.o
obj-$(CONFIG_AS73211) += as73211.o
+obj-$(CONFIG_AS7343) += as7343.o
obj-$(CONFIG_BH1745) += bh1745.o
obj-$(CONFIG_BH1750) += bh1750.o
obj-$(CONFIG_BH1780) += bh1780.o
diff --git a/drivers/iio/light/as7343.c b/drivers/iio/light/as7343.c
new file mode 100644
index 000000000000..9ea6a44c35b9
--- /dev/null
+++ b/drivers/iio/light/as7343.c
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for AMS AS7343 14-channel multi-spectral sensor.
+ * (7-bit I2C slave address 0x39)
+ *
+ * Based on the work of:
+ * Christian Eggers <ceggers@arri.de> (AS73211 driver)
+ *
+ * Copyright (c) 2026 Chang Yu <marcus.yu.56@gmail.com>
+ *
+ * Datasheets:
+ * https://look.ams-osram.com/m/5f2d27fff9a874d2/original/AS7343-14-Channel-Multi-Spectral-Sensor.pdf
+ *
+ * TODO:
+ * - Autosuspend
+ * - Support for configurable gain and integration time
+ * - Interrupt support
+ * - Add support for reading the VIS channel
+ * - Flicker detection
+ */
+
+#include <linux/array_size.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/cleanup.h>
+#include <linux/delay.h>
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+
+#include <asm/byteorder.h>
+
+#include <linux/iio/iio.h>
+
+#define AS7343_ID 0x5a
+
+/* AS7343 config registers */
+#define AS7343_ENABLE 0x80
+#define AS7343_ENABLE_PON BIT(0)
+#define AS7343_ENABLE_SP_EN BIT(1)
+
+/*
+ * Integration time is calculated as (ATIME + 1) * ((ASTEP + 1) * 2.78us).
+ * Setting a 30 * 1.67ms = 50.1ms integration time as the default for now.
+ */
+#define AS7343_ATIME 0x81
+#define AS7343_ATIME_VAL 29 /* (29 + 1) = 30 steps */
+#define AS7343_ASTEP 0xd4
+#define AS7343_ASTEP_VAL 599 /* 1.67ms step size */
+
+#define AS7343_CFG0 0xbf
+#define AS7343_CFG0_REG_BANK BIT(4)
+
+#define AS7343_CFG1 0xc6
+#define AS7343_CFG1_AGAIN GENMASK(4, 0)
+#define AS7343_CFG1_AGAIN_X0_5 0
+#define AS7343_CFG1_AGAIN_X1 1
+#define AS7343_CFG1_AGAIN_X2 2
+#define AS7343_CFG1_AGAIN_X4 3
+#define AS7343_CFG1_AGAIN_X8 4
+#define AS7343_CFG1_AGAIN_X16 5
+#define AS7343_CFG1_AGAIN_X32 6
+#define AS7343_CFG1_AGAIN_X64 7
+#define AS7343_CFG1_AGAIN_X128 8
+#define AS7343_CFG1_AGAIN_X256 9
+#define AS7343_CFG1_AGAIN_X512 10
+#define AS7343_CFG1_AGAIN_X1024 11
+#define AS7343_CFG1_AGAIN_X2048 12
+
+#define AS7343_CFG20 0xd6
+#define AS7343_CFG20_AUTO_SMUX GENMASK(6, 5)
+#define AS7343_CFG20_AUTO_SMUX_READOUT_ALL 3 /* all-channel readout */
+
+#define AS7343_CONTROL 0xfa
+
+/* AS7343 status registers */
+#define AS7343_STATUS2 0x90
+#define AS7343_STATUS3 0x91
+#define AS7343_STATUS 0x93
+#define AS7343_ASTATUS 0x94
+#define AS7343_STATUS5 0xbb
+#define AS7343_STATUS4 0xbc
+#define AS7343_FD_STATUS 0xe3
+
+/* AS7343 spectral data registers */
+#define AS7343_DATA_FZ 0x95
+#define AS7343_DATA_FY 0x97
+#define AS7343_DATA_FXL 0x99
+#define AS7343_DATA_NIR 0x9b
+#define AS7343_DATA_F2 0xa1
+#define AS7343_DATA_F3 0xa3
+#define AS7343_DATA_F4 0xa5
+#define AS7343_DATA_F6 0xa7
+#define AS7343_DATA_F1 0xad
+#define AS7343_DATA_F7 0xaf
+#define AS7343_DATA_F8 0xb1
+#define AS7343_DATA_F5 0xb3
+#define AS7343_DATA_FD_L 0xb7
+#define AS7343_DATA_FD_H 0xb8
+
+/* AS7343 FIFO buffer data registers */
+#define AS7343_FIFO_LVL 0xfd
+#define AS7343_FDATA_L 0xfe
+#define AS7343_FDATA_H 0xff
+
+/* AS7343 channel indices. MUST match data register order above. */
+#define AS7343_CHAN_IDX_FZ 0
+#define AS7343_CHAN_IDX_FY 1
+#define AS7343_CHAN_IDX_FXL 2
+#define AS7343_CHAN_IDX_NIR 3
+#define AS7343_CHAN_IDX_F2 4
+#define AS7343_CHAN_IDX_F3 5
+#define AS7343_CHAN_IDX_F4 6
+#define AS7343_CHAN_IDX_F6 7
+#define AS7343_CHAN_IDX_F1 8
+#define AS7343_CHAN_IDX_F7 9
+#define AS7343_CHAN_IDX_F8 10
+#define AS7343_CHAN_IDX_F5 11
+
+#define AS7343_CHAN(_chan) \
+ { \
+ .type = IIO_INTENSITY, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .address = AS7343_DATA_##_chan, \
+ .indexed = 1, \
+ .channel = AS7343_CHAN_IDX_##_chan, \
+ }
+
+static const struct iio_chan_spec as7343_channels[] = {
+ AS7343_CHAN(FZ), AS7343_CHAN(FY), AS7343_CHAN(FXL), AS7343_CHAN(NIR),
+ AS7343_CHAN(F2), AS7343_CHAN(F3), AS7343_CHAN(F4), AS7343_CHAN(F6),
+ AS7343_CHAN(F1), AS7343_CHAN(F7), AS7343_CHAN(F8), AS7343_CHAN(F5),
+};
+
+struct as7343_data {
+ struct regmap *regmap;
+ /* Ensures reads don't stomp on each other */
+ struct mutex mutex;
+};
+
+static int as7343_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct as7343_data *data = iio_priv(indio_dev);
+ unsigned int unused;
+ struct regmap *map;
+ struct device *dev;
+ __le16 result;
+ int ret;
+
+ map = data->regmap;
+ dev = regmap_get_device(map);
+
+ PM_RUNTIME_ACQUIRE_IF_ENABLED(dev, pm);
+ ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+ if (ret)
+ return ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW: {
+ /* Wait until integration time passes for all 3 cycles. */
+ msleep(160);
+
+ /*
+ * Reading ASTATUS latches all data registers to this read.
+ * We don't care about the returned saturation/gain status for
+ * now.
+ */
+ guard(mutex)(&data->mutex);
+ ret = regmap_read(map, AS7343_ASTATUS, &unused);
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_read(map, chan->address,
+ &result, sizeof(result));
+ if (ret)
+ return ret;
+
+ *val = le16_to_cpu(result);
+ return IIO_VAL_INT;
+ }
+
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * Channel names and wavelength ranges as defined in the datasheet
+ * (Figure 7, "AS7343 Optical Channel Summary"). Values are the
+ * minimum and maximum peak wavelength in nanometers.
+ *
+ * F1: 395-415 nm
+ * F2: 415-435 nm
+ * FZ: 440-460 nm
+ * F3: 465-485 nm
+ * F4: 505-525 nm
+ * FY: 545-565 nm
+ * F5: 540-560 nm
+ * FXL: 590-610 nm
+ * F6: 630-650 nm
+ * F7: 680-700 nm
+ * F8: 735-755 nm
+ * NIR: 845-865 nm
+ */
+static const char * const as7343_channel_labels[] = {
+ [AS7343_CHAN_IDX_F1] = "F1",
+ [AS7343_CHAN_IDX_F2] = "F2",
+ [AS7343_CHAN_IDX_FZ] = "FZ",
+ [AS7343_CHAN_IDX_F3] = "F3",
+ [AS7343_CHAN_IDX_F4] = "F4",
+ [AS7343_CHAN_IDX_FY] = "FY",
+ [AS7343_CHAN_IDX_F5] = "F5",
+ [AS7343_CHAN_IDX_FXL] = "FXL",
+ [AS7343_CHAN_IDX_F6] = "F6",
+ [AS7343_CHAN_IDX_F7] = "F7",
+ [AS7343_CHAN_IDX_F8] = "F8",
+ [AS7343_CHAN_IDX_NIR] = "NIR",
+};
+
+static int as7343_read_label(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, char *label)
+{
+ int channel = chan->channel;
+
+ if (channel >= ARRAY_SIZE(as7343_channel_labels))
+ return -EINVAL;
+
+ return sysfs_emit(label, "%s\n", as7343_channel_labels[channel]);
+}
+
+static const struct iio_info as7343_info = {
+ .read_raw = as7343_read_raw,
+ .read_label = as7343_read_label,
+};
+
+static const struct regmap_range as7343_volatile_ranges[] = {
+ regmap_reg_range(AS7343_ENABLE, AS7343_ENABLE),
+ regmap_reg_range(AS7343_STATUS2, AS7343_DATA_FD_H),
+ regmap_reg_range(AS7343_STATUS5, AS7343_STATUS4),
+ regmap_reg_range(AS7343_FD_STATUS, AS7343_FD_STATUS),
+ regmap_reg_range(AS7343_CONTROL, AS7343_CONTROL),
+ regmap_reg_range(AS7343_FIFO_LVL, AS7343_FDATA_H),
+};
+
+static const struct regmap_access_table as7343_volatile_table = {
+ .yes_ranges = as7343_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(as7343_volatile_ranges),
+};
+
+static const struct regmap_config as7343_regmap_config = {
+ .name = "as7343",
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = AS7343_FDATA_H,
+ .reg_format_endian = REGMAP_ENDIAN_LITTLE,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+ .cache_type = REGCACHE_MAPLE,
+ .volatile_table = &as7343_volatile_table,
+};
+
+static int as7343_setup_device(struct device *dev, struct as7343_data *data)
+{
+ struct regmap *map = data->regmap;
+ unsigned int val;
+ __le16 step;
+ int ret;
+
+ /* Power on */
+ ret = regmap_set_bits(map, AS7343_ENABLE, AS7343_ENABLE_PON);
+ if (ret)
+ return ret;
+
+ /* Need to set REG_BANK to 1 before we can access ID */
+ ret = regmap_set_bits(map, AS7343_CFG0, AS7343_CFG0_REG_BANK);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(map, AS7343_ID, &val);
+ if (ret)
+ return ret;
+
+ if (val != 0x81)
+ dev_info(dev, "Unknown device ID: %x\n", val);
+
+ ret = regmap_clear_bits(map, AS7343_CFG0, AS7343_CFG0_REG_BANK);
+ if (ret)
+ return ret;
+
+ /* Configure the SMUX to readout all channels */
+ ret = regmap_update_bits(map, AS7343_CFG20, AS7343_CFG20_AUTO_SMUX,
+ FIELD_PREP(AS7343_CFG20_AUTO_SMUX,
+ AS7343_CFG20_AUTO_SMUX_READOUT_ALL));
+ if (ret)
+ return ret;
+
+ /* Set 50.1ms integration time and x256 gain for now */
+ step = cpu_to_le16(AS7343_ASTEP_VAL);
+ ret = regmap_bulk_write(map, AS7343_ASTEP, &step, sizeof(step));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(map, AS7343_ATIME, AS7343_ATIME_VAL);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(map, AS7343_CFG1, AS7343_CFG1_AGAIN,
+ FIELD_PREP(AS7343_CFG1_AGAIN,
+ AS7343_CFG1_AGAIN_X256));
+}
+
+static int as7343_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct as7343_data *data = iio_priv(indio_dev);
+ struct regmap *map = data->regmap;
+
+ return regmap_clear_bits(map, AS7343_ENABLE, AS7343_ENABLE_SP_EN);
+}
+
+static int as7343_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct as7343_data *data = iio_priv(indio_dev);
+ struct regmap *map = data->regmap;
+
+ return regmap_set_bits(map, AS7343_ENABLE, AS7343_ENABLE_SP_EN);
+}
+
+static void as7343_suspend_action(void *data)
+{
+ struct device *dev = data;
+
+ as7343_suspend(dev);
+}
+
+static int as7343_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct iio_dev *indio_dev;
+ struct as7343_data *data;
+ struct regmap *regmap;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, indio_dev);
+
+ regmap = devm_regmap_init_i2c(client, &as7343_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ data = iio_priv(indio_dev);
+ data->regmap = regmap;
+
+ ret = devm_mutex_init(dev, &data->mutex);
+ if (ret)
+ return ret;
+
+ indio_dev->name = "as7343";
+ indio_dev->info = &as7343_info;
+ indio_dev->channels = as7343_channels;
+ indio_dev->num_channels = ARRAY_SIZE(as7343_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = devm_regulator_get_enable(dev, "vdd");
+ if (ret)
+ return ret;
+
+ ret = as7343_setup_device(dev, data);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(dev, as7343_suspend_action, dev);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to add suspend action\n");
+
+ ret = pm_runtime_set_active(dev);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to activate PM runtime\n");
+
+ ret = devm_pm_runtime_enable(dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to enable PM runtime\n");
+
+ /* Start measurements */
+ ret = regmap_set_bits(regmap, AS7343_ENABLE, AS7343_ENABLE_SP_EN);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(as7343_pm_ops,
+ as7343_suspend, as7343_resume, NULL);
+
+static const struct of_device_id as7343_of_match[] = {
+ { .compatible = "ams,as7343" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, as7343_of_match);
+
+static const struct i2c_device_id as7343_id[] = {
+ { .name = "as7343" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, as7343_id);
+
+static struct i2c_driver as7343_driver = {
+ .driver = {
+ .name = "as7343",
+ .of_match_table = as7343_of_match,
+ .pm = pm_ptr(&as7343_pm_ops),
+ },
+ .probe = as7343_probe,
+ .id_table = as7343_id,
+};
+module_i2c_driver(as7343_driver);
+
+MODULE_AUTHOR("Chang Yu <marcus.yu.56@gmail.com>");
+MODULE_DESCRIPTION("AS7343 14 Channel Multi-Spectral Sensor driver");
+MODULE_LICENSE("GPL");
--
2.55.0
next prev parent reply other threads:[~2026-09-12 1:39 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-12 1:39 [PATCH v4 0/2] Add support for AS7343 multi-spectral sensor Chang Yu
2026-09-12 1:39 ` [PATCH v4 1/2] dt-bindings: iio: light: add as7343 Chang Yu
2026-09-13 0:56 ` Jonathan Cameron
2026-09-13 1:35 ` Chang Yu
2026-09-13 2:51 ` Jonathan Cameron
2026-09-13 3:20 ` Chang Yu
2026-09-13 17:14 ` Jonathan Cameron
2026-09-12 1:39 ` Chang Yu [this message]
2026-09-12 1:50 ` [PATCH v4 2/2] iio: light: add AS7343 multi-spectral sensor driver sashiko-bot
2026-09-13 2:47 ` Jonathan Cameron
2026-09-13 4:11 ` Chang Yu
2026-09-13 17:17 ` Jonathan Cameron
2026-09-13 0:30 ` [PATCH v4 0/2] Add support for AS7343 multi-spectral sensor Jonathan Cameron
2026-09-13 0:44 ` Chang Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260912013912.51887-3-marcus.yu.56@gmail.com \
--to=marcus.yu.56@gmail.com \
--cc=andy@kernel.org \
--cc=azpijr@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=i.shihao.999@gmail.com \
--cc=jic23@kernel.org \
--cc=joshua.crofts1@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.