All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vitaliy Sochnev <sochnev.v.74@gmail.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
	Daniel Lezcano <daniel.lezcano@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>,
	Lukasz Luba <lukasz.luba@arm.com>,
	Christian Marangi <ansuelsmth@gmail.com>,
	Lorenzo Bianconi <lorenzo@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Vitaliy Sochnev <sochnev.v.74@gmail.com>
Subject: [PATCH 4/4] thermal/drivers/airoha: Register a thermal zone per AN7583 sensor
Date: Sun, 13 Sep 2026 15:52:26 +0100	[thread overview]
Message-ID: <20260913145226.34643-5-sochnev.v.74@gmail.com> (raw)
In-Reply-To: <20260913145226.34643-1-sochnev.v.74@gmail.com>

AN7583 has three temperature sensors and the driver has constants for
all of them, but it registers one zone and reads only the bandgap sensor.

Register a zone per sensor. With one thermal sensor cell the cell
selects the sensor. Device trees without cells describe only zone 0 and
keep reading the bandgap sensor. EN7581 still registers one zone.

Idle and with both cores loaded on a Nokia XG-040G-MF:

  bandgap  56.9 C -> 59.3 C
  GbE      58.7 C -> 61.5 C
  CPU      57.0 C -> 61.1 C

Signed-off-by: Vitaliy Sochnev <sochnev.v.74@gmail.com>
---
 drivers/thermal/airoha_thermal.c | 64 +++++++++++++++++++++++++-------
 1 file changed, 51 insertions(+), 13 deletions(-)

diff --git a/drivers/thermal/airoha_thermal.c b/drivers/thermal/airoha_thermal.c
index d7e4a088b7ea..d996ef539fa1 100644
--- a/drivers/thermal/airoha_thermal.c
+++ b/drivers/thermal/airoha_thermal.c
@@ -245,6 +245,11 @@ enum airoha_thermal_chip_scu_field {
 	AIROHA_THERMAL_FIELD_MAX,
 };
 
+struct airoha_thermal_zone {
+	struct airoha_thermal_priv *priv;
+	int sensor;
+};
+
 struct airoha_thermal_priv {
 	struct regmap *map;
 	struct regmap *chip_scu;
@@ -263,6 +268,9 @@ struct airoha_thermal_priv {
 
 struct airoha_thermal_soc_data {
 	u32 pllrg_protect;
+	/* Sensor mux value per zone, NULL without a sensor mux */
+	const int *sensors;
+	int num_sensors;
 
 	const struct thermal_zone_device_ops *thdev_ops;
 	int (*probe)(struct platform_device *pdev,
@@ -348,7 +356,8 @@ static void airoha_set_thermal_mux(struct airoha_thermal_priv *priv,
 
 static int en7581_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct airoha_thermal_priv *priv = thermal_zone_device_priv(tz);
+	struct airoha_thermal_zone *zone = thermal_zone_device_priv(tz);
+	struct airoha_thermal_priv *priv = zone->priv;
 	int min_value, max_value, avg_value, value;
 	int i;
 
@@ -374,7 +383,8 @@ static int en7581_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 static int en7581_thermal_set_trips(struct thermal_zone_device *tz, int low,
 				    int high)
 {
-	struct airoha_thermal_priv *priv = thermal_zone_device_priv(tz);
+	struct airoha_thermal_zone *zone = thermal_zone_device_priv(tz);
+	struct airoha_thermal_priv *priv = zone->priv;
 	bool enable_monitor = false;
 
 	if (high != INT_MAX) {
@@ -640,8 +650,9 @@ static int an7583_thermal_read_diodes(struct airoha_thermal_priv *priv,
 
 static int an7583_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct airoha_thermal_priv *priv = thermal_zone_device_priv(tz);
-	int sensor_idx;
+	struct airoha_thermal_zone *zone = thermal_zone_device_priv(tz);
+	struct airoha_thermal_priv *priv = zone->priv;
+	int sensor_idx = zone->sensor;
 	int delta_diode, delta_gain;
 	int coeff, slope, offset;
 	int tries = AIROHA_THERMAL_MUX_TRIES;
@@ -649,9 +660,6 @@ static int an7583_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 
 	int diode_zero, diode_d0, diode_d1;
 
-	/* Always read sensor AN7583_BGP_TEMP_SENSOR */
-	sensor_idx = AN7583_BGP_TEMP_SENSOR;
-
 	coeff = an7583_thermal_coeff[sensor_idx];
 	slope = an7583_thermal_slope[sensor_idx];
 	offset = an7583_thermal_offset[sensor_idx];
@@ -715,7 +723,7 @@ static int airoha_thermal_probe(struct platform_device *pdev)
 	const struct airoha_thermal_soc_data *soc_data;
 	struct airoha_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
-	int ret;
+	int ret, i;
 
 	soc_data = device_get_match_data(dev);
 
@@ -737,11 +745,31 @@ static int airoha_thermal_probe(struct platform_device *pdev)
 		return ret;
 
 	/* register of thermal sensor and get info from DT */
-	priv->tz = devm_thermal_of_zone_register(dev, 0, priv,
-						 soc_data->thdev_ops);
-	if (IS_ERR(priv->tz)) {
-		dev_err(dev, "register thermal zone sensor failed\n");
-		return PTR_ERR(priv->tz);
+	for (i = 0; i < soc_data->num_sensors; i++) {
+		struct airoha_thermal_zone *zone;
+		struct thermal_zone_device *tz;
+
+		zone = devm_kzalloc(dev, sizeof(*zone), GFP_KERNEL);
+		if (!zone)
+			return -ENOMEM;
+
+		zone->priv = priv;
+		zone->sensor = soc_data->sensors ? soc_data->sensors[i] :
+						   AIROHA_THERMAL_NO_MUX_SENSOR;
+
+		tz = devm_thermal_of_zone_register(dev, i, zone,
+						   soc_data->thdev_ops);
+		if (IS_ERR(tz)) {
+			/* A DT may describe fewer zones than sensors */
+			if (i && PTR_ERR(tz) == -ENODEV)
+				continue;
+
+			dev_err(dev, "register thermal zone %d failed\n", i);
+			return PTR_ERR(tz);
+		}
+
+		if (!i)
+			priv->tz = tz;
 	}
 
 	platform_set_drvdata(pdev, priv);
@@ -749,7 +777,15 @@ static int airoha_thermal_probe(struct platform_device *pdev)
 	return soc_data->post_probe ? soc_data->post_probe(pdev) : 0;
 }
 
+/* Zone order; the bandgap sensor stays zone 0 */
+static const int an7583_zone_sensors[AN7583_NUM_SENSOR] = {
+	AN7583_BGP_TEMP_SENSOR,
+	AN7583_GBE_TEMP_SENSOR,
+	AN7583_CPU_TEMP_SENSOR,
+};
+
 static const struct airoha_thermal_soc_data en7581_data = {
+	.num_sensors = 1,
 	.pllrg_protect = EN7581_SCU_THERMAL_PROTECT_KEY,
 	.thdev_ops = &en7581_thdev_ops,
 	.probe = &en7581_thermal_probe,
@@ -757,6 +793,8 @@ static const struct airoha_thermal_soc_data en7581_data = {
 };
 
 static const struct airoha_thermal_soc_data an7583_data = {
+	.sensors = an7583_zone_sensors,
+	.num_sensors = AN7583_NUM_SENSOR,
 	.pllrg_protect = AN7583_SCU_THERMAL_PROTECT_KEY,
 	.thdev_ops = &an7583_tz_ops,
 	.probe = &an7583_thermal_probe,
-- 
2.55.0


  parent reply	other threads:[~2026-09-13 12:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-13 14:52 [PATCH 0/4] thermal/drivers/airoha: Fix AN7583 mux mapping and expose all sensors Vitaliy Sochnev
2026-09-13 14:52 ` [PATCH 1/4] thermal/drivers/airoha: Fix AN7583 ADC mux field mapping Vitaliy Sochnev
2026-09-13 14:52 ` [PATCH 2/4] thermal/drivers/airoha: Serialise access to the shared ADC Vitaliy Sochnev
2026-09-13 14:52 ` [PATCH 3/4] dt-bindings: arm: airoha: Allow one thermal sensor cell for AN7583 Vitaliy Sochnev
2026-09-13 13:03   ` sashiko-bot
2026-09-13 14:52 ` Vitaliy Sochnev [this message]
2026-09-13 13:07   ` [PATCH 4/4] thermal/drivers/airoha: Register a thermal zone per AN7583 sensor sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260913145226.34643-5-sochnev.v.74@gmail.com \
    --to=sochnev.v.74@gmail.com \
    --cc=ansuelsmth@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.lezcano@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lorenzo@kernel.org \
    --cc=lukasz.luba@arm.com \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.