[PATCH] PCI: hv: hardwire PCI_INTERRUPT_PIN to 0

[wei.liu@kernel.org]

From: Mukesh R <mrathor@linux.microsoft.com>

Hyper-V Discrete Device Assignment (DDA) does not support legacy (INTX)
interrupts. When PCI_INTERRUPT_PIN is read, the pci-hyperv controller,
which captures configuration space accesses, returns 0 to the caller.

However, the current code only captures 8bit read access, thus 16bit/32bit
are missed, forwarded to the host/HW, and may yield a non zero value.

This fix addresses this issue, and makes sure that PCI_INTERRUPT_PIN is
hardwired to 0, while the other bytes, are those returned by the host/HW.

Signed-off-by: Asher Kariv <askariv@microsoft.com>
Signed-off-by: Mukesh R <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
---
 drivers/pci/controller/pci-hyperv.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 89816a2bd7cd..e6db82413add 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -1240,6 +1240,16 @@ static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where,
 			mb();
 		}
 		spin_unlock_irqrestore(&hbus->config_lock, flags);
+
+		/*
+		 * Make sure PCI_INTERRUPT_PIN is hard-wired to 0, since it
+		 * may be read using a 32bit read, which is skipped by the
+		 * above emulation.
+		 */
+		if (where <= PCI_INTERRUPT_PIN &&
+		    PCI_INTERRUPT_PIN < (where + size))
+			*((char *)val + PCI_INTERRUPT_PIN - where) = 0;
+		}
 	} else {
 		dev_err(dev, "Attempt to read beyond a function's config space.\n");
 	}
-- 
2.53.0