From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, billy_tsai@aspeedtech.com,
linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 03/17] i3c: mipi-i3c-hci-pci: Set drvdata before creating LTR sysfs attribute
Date: Mon, 14 Sep 2026 14:29:49 +0300 [thread overview]
Message-ID: <20260914113003.183150-4-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260914113003.183150-1-adrian.hunter@intel.com>
intel_i3c_init() creates the pm_qos_latency_tolerance_us sysfs attribute
before probe calls pci_set_drvdata(). A userspace write to the attribute
can therefore invoke intel_ltr_set(), which uses pci_get_drvdata(),
before drvdata has been initialized.
Move pci_set_drvdata() before hci->info->init() so drvdata is available
before the sysfs attribute becomes accessible.
Fixes: 884a33131f2a ("i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c b/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c
index ab595661db1e..af9595009b03 100644
--- a/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c
+++ b/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c
@@ -445,6 +445,8 @@ static int mipi_i3c_hci_pci_probe(struct pci_dev *pci,
if (ret < 0)
return ret;
+ pci_set_drvdata(pci, hci);
+
hci->info = (const struct mipi_i3c_hci_pci_info *)id->driver_data;
ret = hci->info->init ? hci->info->init(hci) : 0;
@@ -455,8 +457,6 @@ static int mipi_i3c_hci_pci_probe(struct pci_dev *pci,
if (ret)
goto err_exit;
- pci_set_drvdata(pci, hci);
-
mipi_i3c_hci_pci_rpm_allow(&pci->dev);
return 0;
--
2.53.0
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-09-14 11:30 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-14 11:29 [PATCH 00/17] i3c: Fixes, cleanups and HDR-DDR support Adrian Hunter
2026-09-14 11:29 ` [PATCH 01/17] i3c: master: Fix out-of-bounds read in DMA bounce buffer setup Adrian Hunter
2026-09-14 16:09 ` Frank Li
2026-09-14 11:29 ` [PATCH 02/17] i3c: mipi-i3c-hci: Bounce short reads irrespective of the IOMMU Adrian Hunter
2026-09-14 16:16 ` Frank Li
2026-09-14 11:29 ` Adrian Hunter [this message]
2026-09-14 11:45 ` [PATCH 03/17] i3c: mipi-i3c-hci-pci: Set drvdata before creating LTR sysfs attribute sashiko-bot
2026-09-14 16:17 ` Frank Li
2026-09-14 11:29 ` [PATCH 04/17] i3c: master: Match ACPI targets to the correct bus controller instance Adrian Hunter
2026-09-14 11:50 ` sashiko-bot
2026-09-14 16:19 ` Frank Li
2026-09-14 11:29 ` [PATCH 05/17] i3c: master: Remove stale GETSTATUS length check Adrian Hunter
2026-09-14 16:23 ` Frank Li
2026-09-14 11:29 ` [PATCH 06/17] i3c: mipi-i3c-hci: Fix i3c_hci_enable_ibi() error path Adrian Hunter
2026-09-14 11:46 ` sashiko-bot
2026-09-14 16:27 ` Frank Li
2026-09-14 11:29 ` [PATCH 07/17] i3c: mipi-i3c-hci: Send DISEC before disabling IBIs in hardware Adrian Hunter
2026-09-14 16:29 ` Frank Li
2026-09-14 11:29 ` [PATCH 08/17] i3c: mipi-i3c-hci: Fix runtime PM violation in i3c_hci_free_ibi() Adrian Hunter
2026-09-14 11:58 ` sashiko-bot
2026-09-14 11:29 ` [PATCH 09/17] i3c: mipi-i3c-hci: Process multiple IBIs per interrupt Adrian Hunter
2026-09-14 16:45 ` Frank Li
2026-09-15 9:36 ` Adrian Hunter
2026-09-14 11:29 ` [PATCH 10/17] i3c: mipi-i3c-hci: Move DMA suspend/resume callbacks Adrian Hunter
2026-09-14 16:46 ` Frank Li
2026-09-14 11:29 ` [PATCH 11/17] i3c: mipi-i3c-hci: Stop rings gracefully when suspending Adrian Hunter
2026-09-14 16:51 ` Frank Li
2026-09-14 11:29 ` [PATCH 12/17] i3c: mipi-i3c-hci: Fix Response Descriptor DATA_LENGTH mask Adrian Hunter
2026-09-14 11:48 ` sashiko-bot
2026-09-14 16:55 ` Frank Li
2026-09-14 11:29 ` [PATCH 13/17] i3c: mipi-i3c-hci: Remove invalid transfer size limit Adrian Hunter
2026-09-14 11:49 ` sashiko-bot
2026-09-14 16:58 ` Frank Li
2026-09-14 11:30 ` [PATCH 14/17] i3c: mipi-i3c-hci: Remove invalid HDR-BT and Fm/Fm+ definitions Adrian Hunter
2026-09-14 17:00 ` Frank Li
2026-09-14 11:30 ` [PATCH 15/17] i3c: mipi-i3c-hci: Support configurable device NACK retries Adrian Hunter
2026-09-14 11:56 ` sashiko-bot
2026-09-14 18:21 ` Frank Li
2026-09-15 9:41 ` Adrian Hunter
2026-09-14 11:30 ` [PATCH 16/17] i3c: Restrict HDR modes to those supported by the bus and target Adrian Hunter
2026-09-14 18:26 ` Frank Li
2026-09-14 11:30 ` [PATCH 17/17] i3c: mipi-i3c-hci: Add HDR-DDR support Adrian Hunter
2026-09-14 11:54 ` sashiko-bot
2026-09-14 12:54 ` Adrian Hunter
2026-09-14 18:32 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260914113003.183150-4-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=billy_tsai@aspeedtech.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.